Sealey AP24212 Manuals

instructions for mobile workstation 12/16 drawer with ball bearing runners model no’s: aP24212 & aP24216 thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. saFetY � warning! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this product. 8 do not open more than one drawer at a time. 8 do not step on the drawers. 8 do not let children near the tool chest. 8 do not use in damp areas. 9 ensure drawers are fully closed and the self locking catch is activated before moving the tool chest. 9 Keep the work area clean and ensure there is adequate lighting. � warning! the warnings, cautions and referred to in this instruction manual cannot cover all possible conditions and situations that may occur. it must be understood that common sense and caution are factors that can not be built into this product, but must be applied by the operator. 2. introduction Heavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance and carry heavier loads. Each drawer fitted with catch to prevent unexpected opening, when being transported around the workshop. Added security provided by side mounted cylinder locks, supplied with two keys. recessed handles permit units to be slotted in work environments where space is tight. Rust and solvent resistant powder coat paint finish. Fitted with anti-shock protection on all four corners to prevent accidental damage. tough composite top allows these units to be used as a workstation. 3. sPeciFication AP24212, AP24216| Issue:3 (L) 15/06/17 Original Language Version © Jack sealey limited refer to instruction manual model no. aP24212 aP24216 dimensions (w x d x h) (w x d x h) overall size 1130 x 565 x 1000 1130 x 565 x 1000 drawers Qty Qty medium drawer 3 533 x 391 x 58 6 533 x 391 x 58 large drawer 2 533 x 391 x 128 2 533 x 391 x 128 X-Large Drawer 1 533 x 391 x 195 Medium 1/2 Drawer 3 268 x 391 x 58 6 268 x 391 x 58 Large 1/2 Drawer 2 268 x 391 x 128 2 268 x 391 x 128 X-Large 1/2 Drawer 1 533 x 391 x 195 optional accessories model no. description AP24ACC2 side shelf with Paper roll Holder AP24ACC3 document Holder AP24ACC4 Waste Bin AP24ACC5 can and Bottle Holder AP24ACC6 Drawer Divider 3 x 395 x 58mm AP24ACC7 Drawer Divider 3 x 395 x 120mm AP24ACC9 Short Hook Set x 10pcs AP24ACC10 Medium Hook Set x 10pcs aP24212 aP24216