Sealey AUTO SERVICE LINE VS2005 Manuals

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE. InSTrucTIonS for: DIESEL INJECTOR PULLER CITROEN / PEUGEOT MoDEL no: VS2005 1. SAFETY INSTRUCTIONS 2. INTRODUCTION & CONTENTS  WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.  WARNING! Always use caution when working around fuel systems. The fuel in the fuel rail may be pressurised even if the engine is not running.  IMPORTANT: These instructions are provided as a guide only. Always refer to the vehicle manufacturer’s service instructions, or a proprietary manual, to establish the current procedure and data, also any warnings or cautions particular to the vehicle.  DO NOT use the set if any parts are missing or damaged.  DO NOT use this tool for any purpose other than that for which it is designed.  Switch off vehicle's ignition and disconnect the battery before commencing work under the bonnet.  You must follow the vehicle's service manual cautions when working around the air bag system. If the cautions are not followed the air bag may deploy unexpectedly even after the ignition is turned ‘off’, resulting in personal injury.  never lay tools on the vehicle's battery. This may short the terminals together, causing harm to yourself, the tools, or the battery.  operate in a well ventilated area. Do not inhale fuel vapours.  Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.  Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.  Keep children and other unauthorised persons away from the working area.  Keep yourself, tools, and test equipment away from hot engine parts.  Always keep a fire extinguisher close by, that is suitable for fuel/ electrical/chemical fires.  NEVER smoke or have open flames near vehicle.  Always relieve fuel pressure before disconnecting fuel lines from injectors.  use a rag to cover fuel line fittings, when connecting or disconnecting fuel lines. Avoid contact with fuel.  clean up all fuel spills immediately and dispose of all rags properly.  Maintain the tool components in good and clean condition for best and safest performance.  When work on the vehicle is finished, ensure all connections on vehicle are restored, and that there are no tools left in the engine bay.  replace tools in the carrying case and store in a safe, dry, childproof location. comprehensive set for removing citroen/Peugeot 2.0/2.2HDi fuel injectors. Allows the removal of seized injectors without the need to remove the cylinder head. Bridge fits perfectly on the cylinder head preventing damage to the area surrounding the injector. Supplied in carry-case. Contents: (refer to fig.1) Item Description 1 Bridge 2 3 x Bridge Legs 3 2 x force Screws - Thread 17mm, 25mm x Pitch 1mm 4 force Screw nut 5 Injector Sockets 25mm, 29mm 6 Security Hex Key - ½"sq. drive fig.2 fig.1 Original Language Version VS2005 Issue: 1 - 23/05/11