Sealey MC401 Manuals

2 pdf manual(s) Sealey MC401 for free download (Document Types: Instructions)

Sealey MC401 Instructions [PDF] (3 pages)

Identifier: id-2300048
Brand: Sealey
Device: MC401 Motorcycle Accessories
Type: PDF
Key Aspects: Control Panel and Interface Navigation, Unpacking and Inspection Guidelines, Technical Support and Resource Links
UPD Date: 13.07.2026
Source File: 1987576.pdf
Pages: 3
Description: Comprehensive setup guide for the Sealey MC401.

Pages Preview:

Document Preview & Text Transcription (Main Page)

Click to expand and read text

Unpack the lift and check contents with list below. Should there be any damaged or missing parts contact your supplier immediately. Content • Main Assembly • Sliding Plate • Leading Plate • Vice • Lifting Pedal • Release Pedal • Pedal Guard • Bolts, Washers, Nuts, Cotter Pins  WARNING! Keep your hands away from moving parts. Numbers in brackets refer to item numbers in the parts diagram. 3.1. Assembly 3.1.1. Fit the sliding plate (66) to the platform (60), to cover the rear wheel removal aperture. 3.1.2. Attach leading plate (69) to end of platform (60) using washers (49) and cotter pins (70). 3.1.3. Fit the front wheel vice assembly (64) to the front of the platform (60) using bolts (65), washers (49) and nuts (33). 3.1.4. Insert the lift foot pedal (71) into the pump piston spindle (10) and insert the release foot pedal (72) into the release valve spindle (5). 3.1.5. Attach the guard plate (67) to the frame (44A) using bolts (68) and nuts (P23). This guard covers the release foot pedal to minimise the risk of accidental lowering. 3.1.6. An extension plate (77) is provided for longer wheelbase bikes. Attach this to the front end of the main platform using the screws (75) and the nuts (76). 3.2. Before first use 3.2.1. Leave the pump for one hour, to allow the oil to settle, before purging the system. Note: Failure to allow sufficient time for the oil to settle could result in air remaining in the oil. In this event, the pump will not purge completely first time and a second purge will be required. 3.2.2. Purge the hydraulic circuit, to eliminate any air in the system, by fully pressing the release valve pedal (72) and pumping the lift pedal (71) 15 to 20 times. 3.2.3. Test the lift, unladen, by raising it to full height and then lowering it. Depress release valve pedal (72) slowly to control the rate of descent. INSTRuCTIoNS FoR: 400kG HYDRAULIC MOTORCYCLE LIFT MoDEL No: MC401 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. 1. SAFETY INSTRUCTIONS 2. SPECIFICATION  Maintain the lift in good condition (use an authorised service agent).  Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.  Use a qualified person to lubricate and maintain the lift. DO NOT use brake fluid to top up hydraulic unit.  Locate the lift in a suitable work area. Keep area clean and tidy and free from unrelated materials, and ensure that there is adequate lighting.  Ensure that the floor is level and strong enough (preferably concrete) to take the weight of the lift and the bike. DO NOT operate the lift on tarmacadam, as the surface may be unstable.  Keep the lift clean for best and safest performance.  Before use, stabilise the lift by turning the foot stops so that the lift is just raised off of its wheels.  The maximum bike weight is 400kg. DO NOT exceed this rated capacity.  Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery, and contain long hair.  Maintain correct balance and footing, do not over reach. Ensure the floor is not slippery and wear non-slip shoes.  Ensure the bike is adequately secured to the lifting platform with appropriate straps.  Before lifting check that there are no overhead obstructions.  When platform has been raised to the working height ensure that the platform safety spindle is fitted to prevent accidental lowering.  Keep children and unauthorised persons away from the work area.  The lowering speed will vary according to the weight of the load and the release valve setting.  DO NOT use the lift for a task it is not designed to perform.  DO NOT operate the lift if it is damaged.  DO NOT exceed the rated capacity of the lift.  DO NOT operate the lift when you are tired or under the influence of alcohol, drugs or intoxicating medication.  DO NOT allow untrained persons to operate the lift.  DO NOT attempt to transport a load on the lift. The lift must only be used in a static position for raising and lowering loads.  DO NOT make any modifications to the lift and DO NOT adjust or tamper with the safety valve.  Before lowering the lift ensure that there are no obstructions underneath the platform and that all persons are standing clear.  Before storing in safe area, ensure that all parts are clean and free of grease and oil. Store lift fully lowered. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE kEEP INSTRUCTIONS SAFE FOR FUTURE USE. 3. ASSEMBLY Specification Capacity . . . . . . . . . . . . . . . . . . . . . . . 400kg Minimum Height . . . . . . . . . . . . . . . .180mm Maximum Height . . . . . . . . . . . . . . .760mm Original Language Version MC401 Issue: 6 - 20/10/09

Sealey MC401 Instructions [PDF] (4 pages)

Identifier: id-2300138
Brand: Sealey
Device: MC401 Lifting Systems
Type: PDF
Key Aspects: FAQ Section for Common Queries, Common Issue Diagnostic Flows, Model Variations and Compatibility
UPD Date: 06.07.2026
Source File: 1987486.pdf
Pages: 4
Description: Official product manual for the Sealey MC401.

Pages Preview:

Document Preview & Text Transcription (Main Page)

Click to expand and read text

�� p� ��

Sealey MC401: Lifting Systems, Motorcycle Accessories Category Related Instructions

Genie S-40

04.06.2026 55 pages

Operator's Manual S-40 AUS Australia S-45 with Maintenance Information Eighth Edition First Printing Part No. 1259838 Technical guide for the Genie S-40 Lifting Systems. It contains information on specifications, functional overview, configuration options.

Space SQ401 T

30.03.2026 164 pages

SOLLEVATORE ELETTROIDRAULICO A 4 COLONNE ELECTRO-HYDRAULIC 4 POST LIFT ELEKTRO-HYDRAULISCHE 4-SÄULEN HEBEBÜHNEN PONT ELEVATEUR 4 COLONNES ELECTRO-HYDRAULIQUE ELEVADOR ELECTROHIDRAULICO DE 4 COLUMNAS SQ401 T SQ352 - SQ402 SQ406 E - SQ502 E SQ504 OF - SQ506 OF User and installation guide for the Space SQ401 T Lifting Systems. This manual elaborates on safety precautions, product maintenance, technical specifications.

BLUM AVENTOS HF

24.03.2026 12 pages

Subject to technical modifications without notice. © 2007 AVENTOS HF Wood / wide aluminum hardware set Package contents Part no. Hardware set 78Z5530TA4 2 x Lift mechanisms 2 x Cover plates (right and left) 2 x Cover caps 10 x #7x35mm (1-3/8”) wood screws User setup guide for the BLUM AVENTOS HF Lifting Systems. It contains information on calibration steps, device features, installation procedures, user instructions.

Joerns Quickfit Deluxe Sling

12.03.2026 4 pages

294000.10182 Rev A DCO. 11-0825 USER GUIDE FOR THE QUICKFIT DELUXE SLING The Quickfit Deluxe Sling is a development of the Quickfit design to suit 95% of clients. It provides a more comfortable and more supportive lift without the need for side suspenders. It Device guide for the Joerns Quickfit Deluxe Sling Lifting Systems. The manual guides users through installation guides, software installation, system configuration.