Sealey SLC2 Manuals

1. SAFETY INSTRUCTIONS 2. INTRODUCTION & SPECIFICATION 3. ASSEMBLY ! DO NOT use the ladder rack clamps if any parts are missing or damaged as this may cause failure and/or personal injury. " WARNING! Due to the variety in design of vehicles and roof bars/racks, it is the user’s full responsibility to ensure no damage occurs whilst using these ladder rack clamps. Correct attachment of clamps to a vehicle is therefore critical and is beyond control of the manufacturer, distributor, or supplier. " WARNING! The user must secure the clamps and any ladders properly, checking the security frequently when in use. $ WARNING! Remove any loose objects from the ladders. $ WARNING! Avoid any protrusions beyond the side of the vehicle as these may present a risk of injury to passers-by. ! DO NOT use the ladder rack clamps for any purpose other than that for which they are designed. % DO NOT secure any other items using the clamps. These are designed for ladders only. $ WARNING! Drive carefully - reduce speed accordingly when transporting ladders. & Before every use check the clamps for security of fittings or any sign of wear and tear. Replace any worn or damaged parts. & Check the ladders are stable before transit. $ WARNING! Be wary of the ladder protruding from the boundaries of the vehicle. $ WARNING! Remember the driver of the vehicle is responsible for the security and safety of the load carried. $ WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator. INSTRUCTIONS FOR: LADDER RACK CLAMPS MODEL: SLC2 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, AND CAUTIONS. USE THIS PRODUCT CORRECTLY, AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. Safe and easy way to secure ladders with a universal fitment for roof racks. Yellow phosphate finish for added corrosion resistance. Suitable for trades where ladders need to be transported safely for on-site applications. Supplied with two heavy-duty iron padlocks for security. Made in Britain and BS1706 approved. Maximum ladder width: 365mm. 3.1 Assembly. 3.1.1 Pre-assemble both of the ladder rack clamps as in fig.1 above. ROOF BAR HOOK LADDER STOP LADDER STOP CLAMP BAR WASHER LOCK BAR THREAD PROTECTOR fig.1

LADDER ROOF RACK CLAMPS MODEL NO: SLC2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPPORTA TANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PEERSONNAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY  WARNING! Due to the variety in the design of vehicles and roof bars/racks, it is the users responsibility to ensure that the ladder rack clamps are fi tted and attached correctly.  DO NOT use the ladder rack clamps if any parts are damaged or missing, as this may cause failure and/or possible personal injury.  Maintain the ladder rack clamps in good condition.  Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.  Familiarise yourself with the applications and limitations of the ladder rack clamps, as well as all potential hazards.  DO NOT use the ladder rack clamps for any purpose other than that for which it is designed.  Always use the ladder rack clamps in pairs. One at the front and one at the rear.  During use frequently check that the ladder rack clamps and ladder are secure.  DO NOT over tighten the ladder rack clamps. This may cause damage to the roof bar/rack or the clamps.  Use only to clamp ladders.  WARNING! Remove any loose objects from the ladder prior to clamping to the roof bar/rack.  WARNING! Ensure that neither the ladder rack clamps or the ladder project beyond the maximum profi le of the vehicle.  WARNING! When a ladder is clamped to the roof bars/rack, the characteristics of the vehicle will change. Driving techniques should be altered to allow for this. Reduce speeds and allow longer braking distances.  Check that the ladder is secure and stable prior to transit.  WARNING! The security and safety of the load carried is the responsibility of the vehicle driver.  WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be applied by the operator. 2. INTRODUCTION Universal fi tment for roof racks providing a safe and easy way to secure ladders. Yellow phosphate fi nish for added corrosion resistance. Suitable for trades where ladders need to be transported safely for on site applications. Supplied with two heavy-duty iron padlocks for security. Made in the UK. 3. SPECIFICATION Model No: ..................................................................... SLC2 Maximum width: ......................................................... 365mm 4. CONTENTS SLC2 Issue 2 (H,F) 08/11/21 Original Language Version © Jack Sealey Limited Refer to instructions ITEM DESCRIPTION QTY 1 Roof bar hooks 1 2 Clamp bar 1 3 Ladder stop 2 4 Washer 1 5 Lock bar 1 6 Thread protector 1 7 Padlock (not shown) 1