Sealey TP80 Manuals

� WARNING! This pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and regulations.  Familiarise yourself with application and limitations, as well as the potential hazards peculiar to the pump.  Maintain the pump in good condition. Keep the pump clean.  Replace or repair damaged parts (use an authorised service agent). Use genuine parts only. Non authorised parts may be dangerous and will invalidate the warranty.  DO NOT operate the pump if any parts are damaged or missing as this may cause failure and/or personal injury.  DO NOT use the pump for any purpose other than for which it is designed.  DO NOT operate pump out of liquid. The pump pick up area must be completely submerged during operation.  DO NOT operate the pump during freezing temperatures. DO NOT leave the pump in liquid that may freeze.  DO NOT carry the pump by its electrical cable, or outlet pipe.  When not in use rinse pump, drain out any liquid and store in a frost free, safe location � WARNING! DO NOT allow uncontrolled discharge of contaminated water/harmful chemicals thus polluting the environment. InSTRucTIonS FoR: ELECTRIC JERRY CAN PUMP MoDEL no: TP80 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY INSTRUCTIONS 2. INTRODUCTION & SPECIFICATIONS Easily transfers fluid from 5, 10 & 20ltr jerry cans. Compatible for use with petrol, diesel, kerosene and water. Hook storage design allows pump to attach onto jerry can and features a height adjustable control to accommodate different sized containers. Fitted with auto-stop feature to prevent overfilling. Operated by an electric motor powered by 2 x AA batteries (not included). Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TP80 Hose Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .700mm Flow Rate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9ltr/min Batteries: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x AA (not included) TP80 Issue:1 14/03/14 Original Language Version © Jack Sealey Limited

jerry can pump battery operated Model no: tp80 thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. Safety � WarnInG! This pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and regulations. 9 Familiarise yourself with application and limitations, as well as the potential hazards peculiar to the pump. 9 Maintain the pump in good condition. Keep the pump clean. 9 Replace or repair damaged parts (use an authorised service agent). Use genuine parts only. Non authorised parts may be dangerous and will invalidate the warranty. 9 only to be used in a well ventilated area where there is no chance of sparks or flames. 8 do not use with petrol and kerosene. 8 do not operate the pump if any parts are damaged or missing as this may cause failure and/or personal injury. 8 do not use the pump for any purpose other than for which it is designed. 8 do not operate pump out of liquid. The pump pick up area must be completely submerged during operation. 8 do not operate the pump during freezing temperatures. do not leave the pump in liquid that may freeze. 8 do not carry the pump by its outlet pipe. 9 When not in use rinse pump, drain out any liquid and store in a frost free, safe location. � WarnInG! do not allow uncontrolled discharge of contaminated water/harmful chemicals thus polluting the environment. 2. IntroductIon easily transfers fluid from 5, 10 & 20L jerry cans. Compatible for use with diesel and water. Hook storage design allows pump to attach onto jerry can and features a height adjustable control to accommodate different sized containers. Fitted with auto-stop feature to prevent overfilling. Operated by an electric motor powered by 2 x AA batteries (not included). Not suitable for use with petrol and kerosene. 3. SpecIfIcatIon model no: ..................................................................... tp80 Hose length: .............................................................. 700mm Flow Rate: .................................................................. 9ltr/min Battery: ................................................. 2 x AA (not included) 4. battery fIttInG 4.1. Slide battery compartment open as in fig.1. 4.2. Insert 2 x AA batteries as in fig.2, observing the correct polarity. 4.3. Replace sliding cover. 4.4. Removal of the batteries is the reverse of 4.1 to 4.3. TP80 Issue 5 (1,2,5) 18/11/19 Original Language Version © Jack Sealey limited Refer to instructions fig.1 fig.2

jerry can pump battery operated Model no: tp80 thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. Safety � WarnInG! This pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and regulations. 9 Familiarise yourself with application and limitations, as well as the potential hazards peculiar to the pump. 9 Maintain the pump in good condition. Keep the pump clean. 9 Replace or repair damaged parts (use an authorised service agent). Use genuine parts only. Non authorised parts may be dangerous and will invalidate the warranty. 8 do not operate the pump if any parts are damaged or missing as this may cause failure and/or personal injury. 8 do not use the pump for any purpose other than for which it is designed. 8 do not operate pump out of liquid. The pump pick up area must be completely submerged during operation. 8 do not operate the pump during freezing temperatures. do not leave the pump in liquid that may freeze. 8 do not carry the pump by its outlet pipe. 9 When not in use rinse pump, drain out any liquid and store in a frost free, safe location. � WarnInG! do not allow uncontrolled discharge of contaminated water/harmful chemicals thus polluting the environment. 2. IntroductIon easily transfers fluid from 5, 10 & 20ltr Sealey jerry cans. Compatible for use with diesel, kerosene and water. Hook storage design allows pump to attach onto jerry can and features a height adjustable control to accommodate different sized containers. Fitted with auto-stop feature to prevent overfilling. Suitable for the full range of Sealey jerry cans and other compatible brands. Operated by an electric motor powered by 2 x AA batteries (not included). 3. SpecIfIcatIon model no: ..................................................................... tp80 Hose length: .............................................................. 700mm Flow Rate: .................................................................. 9ltr/min Battery: ................................................. 2 x AA (not included) Weight ......................................................................... 0.28kg 4. battery fIttInG 4.1. Slide battery compartment open as in fig.1. 4.2. Insert 2 x AA batteries as in fig.2, observing the correct polarity. 4.3. Replace sliding cover. 4.4. Removal of the batteries is the reverse of 4.1 to 4.3. TP80 Issue 3 (2) 05/03/19 Original Language Version © Jack Sealey limited Refer to instructions fig.1 fig.2