SECO-LARM ENFORCER E-931-S45RRQ Manuals

® NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors. Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM. SECO-LARM ® U.S.A., Inc., 16842 Millikan Avenue, Irvine, CA 92606 Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326 Website: www.seco-larm.com E-mail: [email protected] WARRANTY: ENFORCER Photobeam Sensors are warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original customer. Our obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation pre-paid, to SECO-LARM. MiE931S45RR_1410.pmd PITSW3 Retro-Reflective Photoelectric Beam Sensor E-931-S45RRQ Range: 45ft. (14m) ENFORCER ® Caution: Included: E-931ACC-BLS1Q Sensor Mounting Bracket E-931ACC-RC1Q Round Reflector Mounting hardware also included. E-931-S45RRQ Transmitter/Receiver • This sensor was not designed to prevent bodily injury or loss of life. • This sensor was not designed for use in environments where there may be explosive gasses present. INSTALLATION MANUAL Features: Typical Applications: ••••• Universal AC/DC power supply. ••••• Waterproof (IP 66) construction for indoor/ outdoor usage. ••••• Dark ON operation (Light ON operation also available). ••••• Pre-wired 6-foot cord. ••••• Bracket and mounting hardware included for both sensor and reflector. ••••• Adjustable response time and sensing range. ••••• Compact size. • Safety sensor for garage doors or outdoor gates. • Overhead doors security sensor. • Industrial automation - Detect small objects on manufacturing line. • Entry detection for store fronts. • Assist in measuring parking distance. • Alarm sensor. • Use of this sensor in certain security applications may be regulated by local laws or codes. SECO-LARM is not responsible for compliance with such laws or codes. Specifications: Troubleshooting: Dimensions: E-931-S45RRQ Retro-Reflective 0.5' to 45' (0.2 - 14 m) 12-250 VDC or VAC 5ms~100ms (Adjustable.) IR LED Yellow LED (Alignment), Red LED (trigger) SPDT Relay output 3A@120VAC / 3A@30VDC IP 66 Waterproof -40 - 1310F (-200 - 550C) Included Model Number: Type: Sensing Range: Voltage Supply: Response Time: Light Source: LEDs: Trigger Output: Switching Capacity: Enclosure: Ambient Temperature: Mounting Brackets for Sensor and Reflector: Yellow LED does not turn on. 1) Dirty sensor and/or reflector. 2) Reflector and/or sensor is misaligned. 1) Clean the sensor and reflector with a damp (not wet) cloth. 2) Adjust the reflector and/or sensor for proper alignment. Red LED lights when object is detected, but no output. No continuity between sensor and alarm device. Check cable from sensor to alarm device. Test sensor. Sensor does not detect the object. 1) Sensor sensitivity is not properly set. 2) Object may have a reflective surface which confuses sensor. Change the angle of the sensor or readjust the sensitivity setting. Trouble Remedy(s) Possible Origin(s) 0.35" (9mm) (82mm) 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 1234567890123456789 (39mm) (20.5mm) (29mm) 2.48"(63mm) 2" (51mm) (5mm) 2-Ø 0.18" (4.5mm) thru hole Ø 0.24" (6mm) cable 6.5' (2m) 0.81" 1.54" 3.23" 1.14" 0.20"