SECO-LARM ENFORCER EV-Y6501-A3WQ Manuals

® Features: EV-Y6501-A3WQ 4-in-1 HD TVI, CVI, AHD, Analog Covert PIR Camera On-Screen Display Manual  Select between multiple formats: TVI, CVI, AHD, and Analog  Joystick OSD Control  D-WDR (Digital Wide Dynamic Range)  Camera is hidden in a non-functioning PIR sensor housing  1/2.8" 5MP Sony CMOS  3.7mm Covert pinhole lens  18 Covert IR LEDs for discreet monitoring  1440p Resolution  2DNR (2D Digital Noise Reduction) ENFORCER Type 4-in-1 HD TVI, CVI, AHD, Analog Covert PIR Camera 2 SECO-LARM U.S.A., Inc. Table of Contents: Programmable Features .................................. 2 How to use the OSD Controller ........................ 3 Navigating the OSD ......................................... 3 Menu Diagram .................................................. 4 Auto Exposure .............................................. 4~5 Backlight ........................................................... 5 Auto White Balance .......................................... 5 Day & Night ...................................................... 6 Image Enhance ............................................ 6~7 Video Output .................................................... 7 Exit ................................................................... 7 Troubleshooting ............................................... 8 Warranty ........................................................... 8  Multiple Output Formats Select between multiple different formats: AHD, CVI, TVI, and CVBS  Digital Wide Dynamic Range (D-WDR) Provide clear images even under circumstances where backlight illumination can vary  Exposure Adjust the shutter speed, automatic gain control (AGC), and defog settings  Back Light Compensation (BLC) Adjust the exposure to properly display the subject in front of bright light sources  White Balance Adjust the picture’s color temperature/image color  Day & Night Adjust the level of ambient light that triggers the camera to switch between color and B/W modes  Noise Reduction (DNR) Adjust for less interference on the screen in an area with low illumination Programmable Features: D-WDR ON D-WDR OFF BLC ON BLC OFF DNR ON DNR OFF ENFORCER Type 4-in-1 HD TVI, CVI, AHD, Analog Covert PIR Camera SECO-LARM U.S.A., Inc. 3 Navigating the OSD: How to use the OSD Controller: Direction Format Setting Up CVBS Down CVI Left AHD Right TVI Camera Power UP DN 1. Press down on the joystick to open the on- screen display (OSD) menu. 2. Use the joystick to navigate the OSD menu. 3. To select an item, press down (enter) on the joystick. 4. To change the output format: a. Using the OSD controller, press the controller in the direction of the desired setting, hold for 5 seconds, and release when the camera restarts. 1. Press down (enter) on the joystick. The Main Menu will be displayed on the monitor. 2. Move to and highlight the required function by moving the joystick up and down. 3. Select the required function by pressing enter on the joystick. 4. Change the menu setting by moving the joystick left or right. 5. After choosing the settings, move the cursor to EXIT and select the option to SAVE & END, RESET, or NOT SAVE. 6. Press enter on the joystick to make the selection and leave the OSD menu. NOTE: A submenu is available where the menu displays  . Down Up Left Right Down L R ENFORCER Type 4-in-1 HD TVI, CVI, AHD, Analog Covert PIR Camera 4 SECO-LARM U.S.A., Inc. Menu Diagram: MAIN MENU SETTING SETTING OPTION AUTO EXPOSURE (AE) BRIGHTNESS LEVEL: 1~20 (DEFAULT:8) EXPOSURE MODE GLOBE DEFAULT BLC LEVEL: 1~9 (DEFAULT:1) FLC LEVEL: 1~9 (DEFAULT:1) AUTO WHITE BALANCE (AWB) ATW DEFAULT MWB RGAIN LEVEL; 1~127 (DEFAULT:-127) BGAIN LEVEL; 1~127 (DEFAULT-:127) DAY / NIGHT EXT DEFAULT AUTO N/A COLOR N/A B/W N/A IMAGE ENHANCEMENT CONTRAST 1~16 (DEFAULT:3) SHARPNESS 1~16 (DEFAULT:4) COLOR GRAIN 1~16 (DEFAULT:5) DNR 1~16 (DEFAULT: 4) MIRROR H,V,HV,DEFAULT D-WDR OFF, ON (DEFAULT: OFF) VIDEO OUTPUT TVI 5MP@20FPS, [email protected], 4MP@25FPS, 4MP@30FPS, 4MP@15FPS, 1080P@25FPS, 1080P@30FPS CVI 4MP@25FPS, 4MP@30FPS, 4MP@15FPS, 1080P@25FPS, 1080P@30FPS AHD 5MP@20FPS, [email protected], 4MP@25FPS, 4MP@30FPS, 4MP@15FPS, 1080P@25FPS, 1080P@30FPS CVBS NTSC, PAL EXIT SAVE & END RESET NOT SAVE This function is used to select the camera’s exposure settings, including brightness, and exposure modes: Globe and BLC. 1. Select Auto Exposure "AE" on the Main Menu screen. 2. Select the desired Exposure operation by moving the joystick up or down, and select the desired setting by moving the joystick left or right and pressing enter to enter the sub-menu (if applicable). Auto Exposure: