SeeEyes SC-16HDS Manuals

DIGITAL FULL HD SPLITTER SC-16HDS User's Manual SC-16HDS 1 Precaution and Safety Guidelines Please read this user’s manual thoroughly prior to use the unit for its easy and convenient use. • Do not install the product in the following places: extremely low or high temperature conditions; places exposed to rain, snow, or high humidity; places containing or exposed to oil and gas; places exposed to vibration and shock; places under direct sunlight or exposed to outdoor weather conditions; places exposed to radio waves (RF) or near to power lines. It may cause low performance or malfunction of the unit. • Do not disassemble the product or insert foreign objects. • The unit is subject to electric shock hazard. Be careful not to get an electric shock while using the device. • Please use only electrical safety approved power supply unit (power adapter) over 12VDC /0.5A with electromagnetic compatibility. • Do not use and/or connect any devices inappropriate to the unit. It may cause malfunction of the unit or fire. • Use this product under temperature conditions only between 0°C and +50°C. • Should be careful not to have the lines changed when connecting them. • Prior to turn on the device, check the cable insulation condition of the data cable, connected with external devices. • Before installing the product, check its voltage rate and then turn on the power. • Make sure to turn off the product prior to installation. • Do not subject the product to physical shock or exert excessive force to operate the product. • Do not use the device when any smoke or smell is produced from the unit. It may be subject to fire or electric shock. If any smoke or smell is produced, please turn off the unit and remove the power cable immediately, and contact your distributor to check the device properly. • If the power does not turn ON, please check whether the power cable is connected correctly or not. • If the device does not work properly, please contact your distributor. 2 1. Introduction 1-1. Overview The SC-16HDS, a Digital Full HD Splitter, offers a high resolution display for video signals received from sixteen SD (standard definition) CCTV cameras with 720*480 Pixel. And it splits the screen in various formats from full screen to 16 screens display mode, without deterioration. Also, it displays the video clearly in a Full HD monitor with 1920*1080P high resolution. With this device, it is possible to amplify video signals to an external device such as DVR from the Loop Thru terminal. And a remote control operation is available through the RS-232C / RS-485 port. It displays the date and time, the name of channel on the monitor, as well as when it occurs any channel loss. 1-2. Features • Displaying high resolution pictures and rapid image processing by the SOC chip • Displaying video from 16 cameras at real time • Auto sequence mode • Motion Detect Automatic Transitions • Pattern change detection function • Supporting NTSC & PAL system • Displaying the date and time, the name of the channel and the current status • RS-232C / RS-485 communication port for external devices • Various mode of screen split (1, 4, 6, 7, 8, 9, 10, 13, 16) 1-3 Applications • Where a centralized supervisory and control system is needed such as the control center at Subway, Airport, Port and etc, • At a control center of large buildings and express way and etc. 2. Components SC-16HDS Rack mount bracket Remote Control Power Cable User’s Manual - PS-2 Mouse, HDMI Cable (3m) 3 3. Product Parts and Peripheral Device Connection 3-1. Name of Parts and Function 3-1-1. SC-16HDS Front Side ① POWER: Select between ON/OFF ② CAMERA SELECT: Press the channel # you want to watch or double click the mouse left side button to display the video in full screen. ③ AUTO SEQUENCE : In full (single) screen, 4, 9 screen mode, press this button to display the screen in auto sequence mode according to the dwell time adjusted in each channel. Press it again to cancel the auto sequence mode. You can set the auto screen dwell time of split screen in menu Sequence Time. Please refer to menu 5-3-3 Sequence Time [Sec]. Full (Single) Screen 4 split 9 split ④ MULTI SCREEN : Please press the multi screen button or click the right mouse button to select the display mode among 1, 4, 6, 7, 8, 9, 10, 13, 16 screens. If you press this button and select the channel you want by pressing the button #② (Camera Select), you can see the video of the channel selected. ⑤ ESC: Press this button to cancel the menu configuration in Setup Menu mode. ⑥ ENTER: Press this button to select the menu you want in Setup Menu mode. ⑦ MENU: Press this button to go to the Setup Menu mode and select the menu you want to adjust. ⑧ ▲/▼/◀/▶: Press these buttons to adjust the menu selected. ⑨ +/- : Press these buttons to change the set value. ① 각 각 채 채널 널에 에 해 해당 당되 되는 는 버 버튼 튼을 을 누 누르 르면 면 해 해당 당 채 채널 널을 을 FFUULLLL 화 화면 면으 으로 로 DDIISSPPLLAAYY 하 하게 게 됩 됩니 니다 다.. ② CCAAM MEERRAA SSEELLEECCTT 각 각 채 채널 널에 에 해 해당 당되 되는 는 버 버튼 튼을 을 누 누르 르면 면 해 해당 당 채 채널 널을 을 FFUULLLL 화 화면 면으 으로 로 DDIISSPPLLAAYY 하 하게 게 됩 됩니 니다 다.. ⑦ ⑧ ⑨ CCAAM MEERRAA SSEELLEECCTT 각 각 채 채널 널에 에 해 해당 당되 되는 는 버 버튼 튼을 을 누 누르 르면 면 해 해당 당 채 채널 널을 을 FFUULLLL 화 화 ③ ④ ⑤ ⑥ CCAAM MEERRAA SSEELLEECCTT 각 각 채 채널 널에 에 해 해당 당되 되는 는 버 버튼 튼을 을 누 누르 르면 면 해 해당 당 채 채널 널을 을 FFUULLLL 화 화면 면