Seiko VD 52 B Manuals

Minute hand Stopwatch second hand (Move in second increments) Second hand Hour hand Stopwatch minute hand (Move in minute increments) ENGLISH <> DISPLAY AND CROWN/BUTTON OPERATION ADJUSTING THE STOPWATCH HAND POSITION Before setting the time, check if the Stopwatch second and minute hands are at the "0"(12 o'clock) position. If the stopwatch is in use, press the button in the following order to reset it, and then, check if the hands return to "0" position. (For details, see "HOW TO USE THE STOPWATCH") If the stopwatch is counting:� (A)� (B) If the stopwatch is stopped:� (B) If the split time is displayed:� (B)� (A)� (B) * If either of the stopwatch hands are not at the "0" position, reset them following the procedure below: 3. Push the crown back to the normal position. 2. Turn the crown clockwise until the previous day's date appears. 24-hour hand (Indicates the time on a 24-hour basis) Button (A) *In stopwatch function Start/Stop Crown at normal position Button (B) *In stopwatch function Split/Split release/Reset Second click *Time setting First click *Date setting * The measured time is indicated by the stopwatch hands that move independently of the center and 24-hour hands. 1. Pull out the crown to the second click. 2. �Press button (A) or (B) to reset the stopwatch second and � minute hands to "0" position. � *�By pressing button (A), set the stopwatch second hand. � *�By pressing button (B), set the stopwatch minute hand. TIME SETTING * Before setting the time, check that the chronograph measurement is stopped. 4. Push the crown back in to the normal position in accordance with a time signal. 3. Pull out the crown to the second click when the second hand is at the 12 o'clock position. It will stop on the spot and advance the hour and minute hands by turning the crown. (Check that 24-hour hand is set correctly.) * When the crown is at the second click position. Do not press any button. Otherwise, the chronograph hands will move. * Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the day may not change properly. If it is necessary to set the date during that time period, first change the time to any time outside it, set the date and then reset the correct time. 1. Pull out the crown to the first click. VD52-P.1 Crown Crown A B Stopwatch minute hand Stopwatch second hand