Sensit RLD-2 Manuals

® SENSIT RLD-2 Refrigerant Gas Detector Read and understand instructions before use. INSTRUCTION MANUAL SENSIT Technologies 851 Transport Drive • Valparaiso IN 46383 (219) 465-2700 • Fax: (219) 465-2701 www.gasleaksensors.com SPECIFICATIONS Power Supply: 3 “C” alkaline batteries Sensor: Conductive Polymer Ionization (CPI) Sensitivity: Selectable to 0.25 oz /yr 134a Warm up: Approx. 3 seconds Response Time: Instantaneous Duty Cycle: Continuous Battery Life: Approx. 24 Hours Size: 3.5” x 10” x 1.6” (89 x 254 x 40 mm) Weight: 1.3 lbs. (591 g) Probe Length: 16” ACCESSORIES REPLACEMENT PARTS PRD0110 Sensor ISRLD0500 Instruction Manual ACCESSORIES PHXG0260 Hard Carrying Case P014091 Earphone GENERAL DESCRIPTION The SENSIT®RLD-2 is a state-of-the- art refrigerant leak detector capable of detecting all halogen based gases. Selectable sensitivity combined with an adjustable tick rate will allow any service professional to pinpoint those tough to find leaks even when the environment is contaminated by other gases. BATTERY REPLACEMENT If the green light fails to illuminate, the batteries need replacement. Depress the latch using a coin and slide the battery compartment cover off. Replace the batteries with 3 “ C ” a l k a l i n e b a t t e r i e s . When replacing the batteries observe the polarity markings on the sides of the battery holder. A fresh set of alkaline batteries should operate the unit for approximately 24 hours. SENSOR REPLACEMENT Replace the sensor when: a)The red light remains illuminated at all times. b)The response is erratic. c)There is reduced sensitivity. 1.Turn the unit off. 2.Remove the old sensor by unscrewing in a counterclockwise direction. 3.Install a replacement sensor by screwing in a clockwise direction until FINGER TIGHT. 4.Do not change the sensor in a hazardous environment. WARNING: Turn unit off before cleaning or replacing the sensor. Failure to do so may result in a mild electrical shock. SCAN MODE (MOST SENSITIVE) NORMAL SENSITIVITY PRODUCT FEATURES POWER OFF/ON VISUAL LEAK INDICATOR SENSOR GOOSENECK CLIP EARPHONE JACK SPEAKER (ON BACK) GREEN READY LED TICK ADJUST GOOSENECK BATTERY COMPARTMENT Instrument Operations on other side.

8 Your SENSIT®RLD-2 is warranted to be free from defects in materials and workmanship for a period of one year after purchase (excluding sensor and batteries). If within the warranty period your instrument should become inoperative from such defects, the unit will be repaired or replaced at our option. This warranty covers normal use and does not cover damage which occurs in shipment or failure which results from alteration, tampering, accident, misuse, abuse, neglect, or improper maintenance. A purchase receipt or other proof of date of original purchase will be required before warranty performance will be rendered. Instruments out of warranty will be repaired for a service charge. Return the unit postpaid and insured to: J And N Enterprises, Inc. 648 W 300 N Valparaiso, IN 46385 (219) 759-1142 This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3/01 SENSIT®RLD-2 WARRANTY AND REPAIR EXCHANGE POLICY Refrigerant Gas Detector Instruction Manual J And N Enterprises, Inc. P.O. Box 183 Wheeler, IN 46393 www.jandnent.com Phone: (219) 759-1142 Fax: (219) 759-1835