SEW-Eurodrive MOVITRAC LTP-B Manuals

*23540052_0618* Drive Technology \ Drive Automation \ System Integration \ Services Manual MOVITRAC® LTE-B+/LTP-B Accessories Braking Resistors, Filters, Chokes, Shielding Edition 06/2018 23540052/EN SEW-EURODRIVE—Driving the world Table of contents Manual – Accessories 3 Table of contents 1 General information..................................................................................................................   4 1.1 About this documentation ............................................................................................... 4 1.2 Rights to claim under limited warranty............................................................................ 4 1.3 Other applicable documentation ..................................................................................... 4 1.4 Copyright notice.............................................................................................................. 4 2 System overview ......................................................................................................................   5 2.1 System overview of MOVITRAC® LTE-B+ ..................................................................... 5 2.2 System overview of MOVITRAC® LTP-B ....................................................................... 7 3 Flatpack resistors.....................................................................................................................   9 3.1 Technical data................................................................................................................. 9 3.2 Installation IP20 ............................................................................................................ 10 3.3 Installation IP55 ............................................................................................................ 12 3.4 Startup and operation ................................................................................................... 15 4 EMC components ...................................................................................................................   16 5 NF line filter.............................................................................................................................   17 5.1 Electromagnetic compatibility ....................................................................................... 17 5.2 Technical data............................................................................................................... 19 5.3 Dimensions ................................................................................................................... 22 5.4 Installation..................................................................................................................... 30 5.5 Startup and operation ................................................................................................... 31 6 Line chokes.............................................................................................................................   32 6.1 General ......................................................................................................................... 32 6.2 Technical data............................................................................................................... 33 6.3 Dimensions ................................................................................................................... 34 6.4 Installation..................................................................................................................... 37 6.5 Startup and operation ................................................................................................... 37 7 Output chokes.........................................................................................................................   38 7.1 Technical data............................................................................................................... 39 7.2 Dimensions ................................................................................................................... 40 7.3 Installation..................................................................................................................... 42 7.4 Startup and operation ................................................................................................... 42 8 Shield plate IP20 .....................................................................................................................   43 8.1 Installation..................................................................................................................... 44 8.2 Type designation and specification............................................................................... 44 Index ........................................................................................................................................   45 23540052/EN – 06/2018

*21326991_0515* Drive Technology \ Drive Automation \ System Integration \ Services Manual MOVITRAC® LTE-B/LTP-B Accessories Keypads, Parameter Module, Cable Sets Edition 05/2015 21326991/EN SEW-EURODRIVE—Driving the world Table of contents Manual – Accessories 3 Table of contents 1 General information .................................................................................................................. 5 1.1 About this documentation ............................................................................................... 5 1.2 Rights to claim under limited warranty ........................................................................... 5 1.3 Other applicable documentation .................................................................................... 5 1.4 Copyright notice ............................................................................................................. 5 2 System overview ....................................................................................................................... 6 2.1 System overview of MOVITRAC® LTE-B ....................................................................... 6 2.2 System overview of MOVITRAC® LTP-B ....................................................................... 7 3 Parameter module ..................................................................................................................... 8 3.1 Parameter module .......................................................................................................... 8 3.1.1 Technical data................................................................................................. 8 3.2 Installation, startup, and operation ................................................................................. 9 3.2.1 Directly at the frequency inverter .................................................................... 9 3.2.2 With LT Shell software.................................................................................. 11 4 Keypad...................................................................................................................................... 14 5 Remote keypads...................................................................................................................... 15 5.1 LT BG-C remote keypad .............................................................................................. 15 5.1.1 Installation in the control cabinet or control panel......................................... 16 5.1.2 Technical data............................................................................................... 17 5.1.3 Display messages......................................................................................... 17 5.2 LT ZBG OLED A remote keypad .................................................................................. 18 5.2.1 Installation in the control cabinet or control panel......................................... 18 5.2.2 Technical data............................................................................................... 19 5.2.3 Display messages......................................................................................... 19 5.3 Electrical installation ..................................................................................................... 20 5.4 System structure .......................................................................................................... 21 5.5 Startup .......................................................................................................................... 22 5.5.1 Setting the communication address.............................................................. 22 5.5.2 Changing/monitoring the parameters............................................................ 22 5.5.3 Preset setpoint speed for operation with remote keypad.............................. 22 5.5.4 Speed change in real time mode with remote keypad.................................. 23 5.5.5 Direction of rotation reversal......................................................................... 24 5.5.6 Lock/enable parameter access..................................................................... 24 6 Network packages................................................................................................................... 25 6.1 Basic package (cable set A) ......................................................................................... 25 6.2 Extension package (cable set B) .................................................................................. 26 6.2.1 Example........................................................................................................ 26 6.3 PC engineering package (cable set C) ........................................................................ 27 6.3.1 Example 1..................................................................................................... 27 6.3.2 Example 2..................................................................................................... 28 6.4 Cable splitter 1 to 2 ...................................................................................................... 29 7 Prefabricated cables ............................................................................................................... 30 21326991/EN – 05/2015

*26879778_0321* Drive Technology \ Drive Automation \ System Integration \ Services Compact Operating Instructions MOVITRAC® LTP-B Edition 03/2021 26879778/EN SEW-EURODRIVE—Driving the world Table of contents Compact Operating Instructions – MOVITRAC® LTP-B 3 Table of contents 1 General information..................................................................................................................   4 1.1 About this documentation ............................................................................................... 4 1.2 Structure of the safety notes........................................................................................... 4 1.3 Decimal separator in numerical values........................................................................... 5 1.4 Rights to claim under limited warranty............................................................................ 5 1.5 Content of the documentation......................................................................................... 5 1.6 Other applicable documentation ..................................................................................... 5 1.7 Product names and trademarks...................................................................................... 5 1.8 Copyright notice.............................................................................................................. 6 2 Safety notes ..............................................................................................................................   7 2.1 Preliminary information ................................................................................................... 7 2.2 Duties of the user............................................................................................................ 7 2.3 Target group ................................................................................................................... 7 2.4 Network security and access protection ......................................................................... 8 2.5 Designated use............................................................................................................... 8 2.6 Functional safety technology .......................................................................................... 9 2.7 Transport......................................................................................................................... 9 2.8 Installation/assembly..................................................................................................... 10 2.9 Electrical installation ..................................................................................................... 11 2.10 Protective separation .................................................................................................... 11 2.11 Startup/operation .......................................................................................................... 12 3 Device structure .....................................................................................................................   13 3.1 Nameplate..................................................................................................................... 13 3.2 Type designation........................................................................................................... 13 4 Installation...............................................................................................................................   15 4.1 Electrical installation ..................................................................................................... 15 5 Startup .....................................................................................................................................   26 5.1 User interface................................................................................................................ 26 5.2 Automatic measuring procedure "Auto tune" ............................................................... 34 5.3 Startup for motors ......................................................................................................... 34 6 Operation.................................................................................................................................   39 6.1 Inverter status ............................................................................................................... 39 6.2 Error list......................................................................................................................... 41 26879778/EN – 03/2021 1 General information About this documentation Compact Operating Instructions – MOVITRAC® LTP-B 4 1 General information 1.1 About this documentation The documentation at hand is the original. This documentation is an integral part of the product. The documentation is intended for all employees who perform work on the product. Make sure this documentation is accessible and legible. Ensure that persons respon- sible for the systems and their operation as well as persons who work on the product independently have read through the documentation carefully and understood it. If you are unclear about any of the information in this documentation or if you require further information, contact SEW‑EURODRIVE. 1.2 Structure of the safety notes 1.2.1 Meaning of signal words The following table shows the grading and meaning of the signal words for safety notes. Signal word Meaning Consequences if disregarded  DANGER Imminent hazard Severe or fatal injuries  WARNING Possible dangerous situation Severe or fatal injuries  CAUTION Possible dangerous situation Minor injuries NOTICE Possible damage to property Damage to the product or its envi- ronment INFORMATION Useful information or tip: Simplifies handling of the product. 1.2.2 Structure of section-related safety notes Section-related safety notes do not apply to a specific action but to several actions pertaining to one subject. The hazard symbols used either indicate a general hazard or a specific hazard. This is the formal structure of a safety note for a specific section: SIGNAL WORD Type and source of hazard. Possible consequence(s) if disregarded. • Measure(s) to prevent the hazard. Meaning of the hazard symbols The hazard symbols in the safety notes have the following meaning: Hazard symbol Meaning General hazard 26879778/EN – 03/2021

*25813137_0818* Drive Technology \ Drive Automation \ System Integration \ Services Operating Instructions Standard Inverters MOVITRAC® LTP-B Edition 08/2018 25813137/EN SEW-EURODRIVE—Driving the world Table of contents Operating Instructions – MOVITRAC® LTP-B 3 Table of contents 1 General information..................................................................................................................   8 1.1 About this documentation ............................................................................................... 8 1.2 Structure of the safety notes........................................................................................... 8 1.2.1 Meaning of signal words ................................................................................   8 1.2.2 Structure of section-related safety notes........................................................   8 1.2.3 Structure of embedded safety notes ..............................................................   8 1.3 Rights to claim under limited warranty............................................................................ 9 1.4 Content of the documentation......................................................................................... 9 1.5 Exclusion of liability......................................................................................................... 9 1.6 Product names and trademarks...................................................................................... 9 1.7 Copyright notice.............................................................................................................. 9 2 Safety notes ............................................................................................................................   10 2.1 Preliminary information ................................................................................................. 10 2.2 Duties of the user.......................................................................................................... 10 2.3 Target group ................................................................................................................. 10 2.4 Designated use............................................................................................................. 11 2.4.1 Hoist applications .........................................................................................   11 2.5 Functional safety technology ........................................................................................ 12 2.6 Transport....................................................................................................................... 12 2.7 Installation/assembly..................................................................................................... 12 2.7.1 Restrictions of use........................................................................................   13 2.8 Electrical connection..................................................................................................... 13 2.8.1 Required preventive measure ......................................................................   13 2.8.2 Stationary application...................................................................................   13 2.9 Protective separation .................................................................................................... 14 2.10 Startup/operation .......................................................................................................... 14 3 Device structure .....................................................................................................................   15 3.1 Nameplate..................................................................................................................... 15 3.2 Type designation........................................................................................................... 15 3.3 Device structure of the standard inverter...................................................................... 17 3.3.1 Inverters with degree of protection IP20/NEMA 1 ........................................   17 3.3.2 Inverters with degree of protection IP66/NEMA 4X......................................   18 3.3.3 Inverters with degree of protection IP55/NEMA 12K....................................   19 4 Installation...............................................................................................................................   20 4.1 General information ...................................................................................................... 20 4.2 Permitted tightening torques......................................................................................... 21 4.3 Mechanical installation.................................................................................................. 22 4.3.1 IP20 housing: Installation and installation space .........................................   22 4.3.2 IP55/IP66 housing: Installation and control cabinet dimensions..................   23 4.4 Electrical installation ..................................................................................................... 24 4.4.1 Before installation.........................................................................................   24 4.4.2 Line contactors.............................................................................................   25 4.4.3 Mains fuses ..................................................................................................   26 25813137/EN – 08/2018

Drive Technology \ Drive Automation \ System Integration \ Services Operating Instructions MOVITRAC® LTP-B Edition 06/2012 19440413 / EN SEW-EURODRIVE—Driving the world Operating Instructions – MOVITRAC® LTP-B 3 Contents Contents 1 Important Notes................................................................................................... 5 1.1 How to use this documentation................................................................... 5 1.2 Structure of the safety notes ....................................................................... 5 1.3 Rights to claim under limited warranty ........................................................ 7 1.4 Exclusion of liability..................................................................................... 7 1.5 Copyright notice.......................................................................................... 7 1.6 Product names and trademarks.................................................................. 7 2 Safety Notes ........................................................................................................ 8 2.1 Preliminary information ............................................................................... 8 2.2 General information .................................................................................... 8 2.3 Target group ............................................................................................... 9 2.4 Designated use ........................................................................................... 9 2.5 Functional safety technology ...................................................................... 9 2.6 Transport................................................................................................... 10 2.7 Installation / Assembly .............................................................................. 10 2.8 Electrical connection ................................................................................. 11 2.9 Safe disconnection.................................................................................... 11 2.10 Startup / Operation.................................................................................... 12 2.11 Unit temperature ....................................................................................... 12 3 General specifications MOVITRAC® LTP-B.................................................... 13 3.1 Input voltage ranges ................................................................................. 13 3.2 Product designation .................................................................................. 13 3.3 Overload capacity ..................................................................................... 14 3.4 Protection features.................................................................................... 14 4 Installation ......................................................................................................... 15 4.1 Mechanical Installation.............................................................................. 15 4.2 Dimensions ............................................................................................... 15 4.3 IP20 housing: Mounting and dimensions of control cabinet...................... 19 4.4 Electrical Installation ................................................................................. 21 5 Startup................................................................................................................ 35 5.1 User interface............................................................................................ 35 5.2 Easy startup for MOVITRAC® LTP-B........................................................ 37 6 Operation ........................................................................................................... 45 6.1 Drive status ............................................................................................... 45 7 Service and fault codes.................................................................................... 47 7.1 Troubleshooting ........................................................................................ 47 7.2 Fault history .............................................................................................. 47 7.3 Fault codes ............................................................................................... 48 7.4 SEW electronics service ........................................................................... 50 4 Operating Instructions – MOVITRAC® LTP-B Contents 8 Parameters......................................................................................................... 51 8.1 Overview of parameters............................................................................ 51 8.2 Explanation of the parameters .................................................................. 59 9 Software........................................................................................................... 100 9.1 Modbus control ....................................................................................... 100 10 Technical Data MOVITRAC® LTP-B............................................................... 103 10.1 Conformance .......................................................................................... 103 10.2 Environmental ......................................................................................... 103 10.3 Output power and current ratings ........................................................... 104 11 Address List .................................................................................................... 113 Index................................................................................................................. 125

Drive Technology \ Drive Automation \ System Integration \ Services Operating Instructions MOVITRAC® LTP-B Edition 12/2010 16932811 / EN SEW-EURODRIVE—Driving the world Operating Instructions – MOVITRAC® LTP-B 3 Contents Contents 1 Important Notes................................................................................................... 5 1.1 About this documentation ........................................................................... 5 1.2 Structure of the safety notes ....................................................................... 5 1.3 Rights to claim under limited warranty ........................................................ 7 1.4 Exclusion of liability..................................................................................... 7 1.5 Copyright notice.......................................................................................... 7 1.6 Product names and trademarks.................................................................. 7 2 Safety Notes ........................................................................................................ 8 2.1 Preliminary information ............................................................................... 8 2.2 General ....................................................................................................... 8 2.3 Target group ............................................................................................... 9 2.4 Designated use ........................................................................................... 9 2.5 Transport................................................................................................... 10 2.6 Installation................................................................................................. 10 2.7 Electrical connection ................................................................................. 11 2.8 Safe disconnection.................................................................................... 11 2.9 Operation .................................................................................................. 12 2.10 Unit temperature ....................................................................................... 12 3 General specifications MOVITRAC® LTP-B.................................................... 13 3.1 Input voltage ranges ................................................................................. 13 3.2 Product designation .................................................................................. 13 3.3 Overload capability ................................................................................... 14 3.4 Protection features.................................................................................... 14 4 Installation ......................................................................................................... 15 4.1 Mechanical Installation.............................................................................. 15 4.2 Dimensions ............................................................................................... 15 4.3 IP20 housing: mounting and dimensions of switch cabinet ...................... 17 4.4 Electrical Installation ................................................................................. 19 5 Startup................................................................................................................ 31 5.1 User interface............................................................................................ 31 5.2 Easy startup for MOVITRAC® LTP-B........................................................ 33 6 Operation ........................................................................................................... 41 6.1 Drive status ............................................................................................... 41 7 Service and fault codes.................................................................................... 43 7.1 Troubleshooting ........................................................................................ 43 7.2 Fault history .............................................................................................. 43 7.3 Fault codes ............................................................................................... 44 7.4 SEW electronics service ........................................................................... 46