Sharp AN-PH80CW Manuals

Printed in China 9NK5010098600 11P05-CH-NM INSTALLATION MANUAL IMPORTANT NOTE TO U.S. CUSTOMERS: The Color Wheel is backed by a 3-year parts and labor limited warranty. All service of this projector under warranty, including Color Wheel replacement, must be obtained through a Sharp Authorized Projector Dealer or Service Center*. For the name of the nearest Sharp Authorized Projector Dealer or Service Center*, please call toll-free: 1-888-GO-SHARP (1-888-467-4277). U.S.A. ONLY * Confi rm the name of the Dealer or Service Center referring to your projector operation manual. COLOR WHEEL FOR PROJECTOR MODEL AN-PH80CW Replacing the Color Wheel Warning! Do not remove the color wheel from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury. • 1 Press STANDBY/ON on the projector or on the remote control to put the projector into Standby mode. 2 Switch the MAIN POWER switch on the projector to “OFF” and then disconnect the power cord. Unplug the power cord from the AC socket. Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). • • • 1 STANDBY/ON button AC socket MAIN POWER switch STANDBY/ON button AC socket MAIN POWER switch 2 3 User service screw (for lamp unit cover) User service screw (for lamp unit cover) 4 Loosen the 4 retaining screws from the four-segment color wheel. 5 Hold the color wheel and pull it in the direction of the arrow. Caution The module contains components that can be damaged or destroyed by electrostatic discharge. Please pick the module with the handle. 6 Insert the six-segment color wheel, and tighten the 4 retaining screws. 7 Replace the lamp unit cover. Align the lamp unit cover and slide it to close (1). Then tighten the user service screw (2) to secure the lamp unit cover. Info Storing the Unused Color Wheel: Use the zipper bag in which the six-segment color wheel was packaged to store the unused color wheel. This bag prevents dust and dirt from collecting on the color wheel. • 4 5 Handle Handle 6 7 AN-PH80CW_ColorWheel.indd 1 AN-PH80CW_ColorWheel.indd 1 2011/04/20 1 2011/04/20 1