Sharp ZQ-P10 Manuals

Part Names Using the Organizer for the First Time Be sure to perform the following operations before using the Organizer for the first time. 1. Pull out to remove the isolating film on the back of the unit. 2. Press the RESET switch with a stylus. "RESET?" is displayed. 3. Tap f and press x to initialize the Organizer. Moments later, "RESET!" will be displayed, and the Organizer's memory contents will be cleared. Soon after, the Select Language screen appears. Guidance messages can be displayed in 10 languages: English, Italian, German, French, Spanish, Portuguese, Hungarian, Czech, Polish, and Greek. When the Organizer is initialized, the setting will revert to English as default. Select the desired language using > or <, then press x. When the language is set, the Home Clock will be displayed on the screen. (See "Clock Mode".) NOTES • If the Organizer is subjected to strong, extraneous electrical noises or shocks during use, an abnormal condition may occur in which no keys (including ON OFF ) will respond. Press the RESET switch, tap f, then press x to delete all the memory contents. • To minimize battery consumption, the Organizer is designed to turn its power off automatically when no key activities are detected for approximately 7 minutes. • The key touch tone can be turned on and off by tapping h !, select "KEY TONE?" using > or <, and press x. Select on/off using > or <, then press x. When the tone is activated, “ ” will appear. Entering Characters Touch Keyboard Alphabet entry mode Number entry mode • Each time f is tapped, the touch keyboard switches between the Alphabet entry mode and the Number entry mode. To tap the touch keys, use the attached stylus. • Tap towards the center of each key. • Numbers, alphanumeric letters, symbols, and “+ – × ÷ .” can be entered into the dot display area (the 1st line). • Numbers and some characters (only space, –, F, and P in Telephone mode) can be entered into the number display area (the 2nd and the 3rd lines). • Letters are entered in capital letters (“CAPS” is turned on). To enter lowercase letters, tap CAPS to turn “CAPS” off. Entering symbols and letters with an accent mark • To enter a symbol, tap SMBL repeatedly until the desired symbol appears: @#$£¥ ( )~’: /\_&<>ß!?¡¿æµ¢ • To enter a letter with an accent mark, tap the relevant key shown below repeatedly after tapping s. • Activate “CAPS” on to enter capitalized letters. • In the Greek language mode, only the capitalized letters can be entered. Making corrections Move the cursor to the character to be corrected. Enter the correct character to replace the previous one. Cursor The cursor (_) indicates the position for entering a character. Move the cursor with the cursor keys ( ). Inserting characters Each time INS is tapped, a space is inserted at the cursor position to allow character entry. Deleting characters Tap DEL to delete the character at the cursor position. Tap C•CE to clear all the characters you have entered and yet to be stored. Telephone Mode Telephone mode is composed of two directions of storage memory. Tap TEL to toggle between “1” and “2” on the display. Use these files for convenience, e.g. business and private files. A telephone entry consists of name, address, E-mail address, web address (URL) and number fields. Storing telephone entries 1. Tap TEL once or twice to display the Telephone mode screen. 2. Enter name, e.g. SMITH SPACE ROBERT, and press ENTER . 3. Enter address, e.g. f 18 SPACE f EAST SPACE ROAD, and press ENTER . 4. Enter E-mail address, e.g. SROB SMBL l (to enter “@”) SHARPSEC.COM, and press ENTER . • The E-mail address is automatically entered in lowercase letters. • To enter “@”, simply tap @ instead of SMBL . 5. Enter web address (URL), e.g. WWW.SHARP USA.COM, and press ENTER . Schedule Mode Schedule mode is used for storing schedule details (36 characters or under), date and time (year, month, day, hour, and minute). In the 1st line the same characters are allowable as in Telephone mode. 1. Storing schedule entries 1. Tap to display the Schedule mode screen. 2. Enter the details and press ENTER . 3. Enter the date and time. • The types of date and time are the same as the types set for the clock. • To enter a single-digit date or time, enter “0” and the digit (e.g. “O2”). 6. Enter phone number, and fax number if needed, e.g. 012-3456-7890 f F SPACE SPACE SPACE f 3456-7891, and press ENTER . • “STORED!” appears briefly, then the Telephone mode screen is displayed. The telephone entry is now stored. Notes • The symbol “NAME”, “ADDRESS”, “E-mail”, or “URL” is turned on while entering in each field. • To skip entry of an address, E-mail address, web address (URL), or number, press ENTER when “ADDRESS?”, “E-MAIL?”, “URL?”, or “NUMBER?” is displayed. However, entry must be made at the "NAME?" field. Allowable characters The 1st line: Name, address, E-mail address and web address (URL) Field Number of characters The 2nd and the 3rd lines: Phone number 36 characters or under Alphabetic letters, numbers, symbols, “+ – × ÷ .”, space Numbers, space, –, F (Fax), P (Pager) PRINTED IN CHINA/IMPRIMÉ EN CHINE/IMPRESO EN CHINA 03DGK (TINSE0630EHZZ) ZQ-P10 English Front sheet OPERATION MANUAL ELECTRONIC ORGANIZER ZQ-P10 3. Using World clock 1. Tap CLOCK once or twice to display the World clock (without “ ”). 2. Press > or < to select the desired city. 4. Changing the cities between Home and World clocks You can change the home city for a city in another time zone without adjusting the stored correct time. 1. Tap CLOCK once or twice to display the World clock (without “ ”). 2. Press > or < and select the desired city to be set as the new home city. 3. Tap f e to change the cities between Home and World clocks. • The previous home city is now set as the world city (without “ ”). 4. Tap CLOCK to check the home city. • The selected city in step 2 is set as the home city (with “ ”). 5. Tap CLOCK to recheck the world city, and press > or < to select the new world city, if needed. 5. Setting daylight saving time (DST: summer time) 1. Tap CLOCK once or twice to display the Home or the World clock. 2. Tap DST . “#” is displayed. The time is set 1 hour ahead. To clear DST, tap DST to clear “#”. The time is set 1 hour behind. Notes • DST can be set independently in either Home or World clock. • When DST is set for one world city, it is used for all cities displayed in World clock. 6. Setting alarms The Organizer has 3 types of alarms: 1. Daily alarm ........beeps every day at the alarm time (for 1 minute), when “ ” is turned on. 2. Hourly alarm ......beeps every hour when minutes reach “00”, when “ ” is turned on. 3. Schedule alarm ..beeps at the time for all the schedule entries (for 1 minute), when “ ” is turned on. (Refer to “Schedule Mode”.) Tap any key to stop the alarm beeping. Setting/Changing the daily alarm time 1. Tap CLOCK once or twice to display Home clock (with “ ”). 2. Tap to display the daily alarm screen. (The display differs between the 12-hour and 24-hour clock.) 3. Tap f e. 4. Enter the time. 5. Press ENTER . • The daily alarm time is set. Turning the alarms on and off An alarm sounds only when the respective symbol ( , , or ) is turned on. Display Home clock (tap CLOCK once or twice) and tap to display the daily alarm screen. Each time you tap while the daily alarm screen is displayed, the combination of symbols switches. Note • Alarms sound even when the Organizer is turned off. ALARM 0 – 0 0 CAPS 1 NAME? E-mail h a r p s e c . c om– 1 CAPS 2nd NUMBER? 2 – 3 4 5 6 – 7 8 9 0 3 4 5 6 – 7 8 9 1 – 1 SCHEDULE? 4. Press ENTER to store in the memory. Notes • Schedules for the following dates can be stored: January 1901 to December 2098. • If an attempt is made to store an entry without a date or time, or with an invalid date or time, “ERROR!” appears briefly. Enter the correct date and time and press ENTER . 2. Alarm for Schedule mode When the schedule alarm (“ ”) is turned on, it is set for all the schedule entries. Beeping sounds for 1 minute when the time for a schedule entry is reached. Tap any key to stop the alarm. The schedule alarm cannot be set for an individual entry. 1. Before setting the clock • The default setting for the date is “DD/MM/ YYYY” (day-month-year). To change the setting to “MM/DD/YYYY” (month-day-year) or “YYYY/ MM/DD” (year-month-day): 1. Tap CLOCK once or twice to display the Home clock (with “ ”). 2. Tap !, select “DATE SET” by using k or m , and press x. 3. Press > or < to select the desired type. 4. Press ENTER to store the new setting. • To change the 24-hour clock to the 12-hour clock, tap Z (“A” or “P” is displayed). Each time Z is tapped, the clock switches. • For daylight saving time/summer time, tap DST in advance (“#” is displayed on the left side of the day of the week). 2. Setting the clock 1. Tap CLOCK once or twice to display the Home clock (with “ ”). 2. Tap f e to start setting. The cursor starts to flash on the city name. 3. Press > or < to select the desired time zone. (Refer to the list of cities described below.) • Enter the city name, if needed (6 characters or under). Only one changed name for Home clock can be stored. 4. Tap to move the cursor to the day. 5. Enter the day, the month, and the year (4 digits ). • The built-in calendar extends from January 1st, 1901, to December 31st, 2098. • Tap AM/PM to select “A” (morning) or “P” (afternoon) for the 12-hour clock. (in 12- hour) 6. Enter the time (hours and minutes) 7. Press ENTER . The clock starts from “00” seconds. Notes • To enter a single-digit date or time, enter “0” and the digit (e.g. “02”). • If you enter an invalid date or time, “ERROR!” appears briefly. Enter the correct date and time and press ENTER . Zone Display City Zone Display City No. No. 0 TNG TONGA 10 MOW MOSCOW 1 WLG WELLINGTON 11 CAI CAIRO 2 NOU NOUMEA 12 PAR PARIS 3 SYD SYDNEY 13 LON LONDON 3.3 ADL ADELAIDE 14 AZ0 AZORES ISLANDS 4 TYO TOKYO 15 -2H 2hrs behind LON 5 HKG HONG KONG 16 RIO RIO DE JANEIRO 6 BKK BANGKOK 17 CCS CARACAS 6.3 RGN YANGON 18 NYC NEW YORK 7 DAC DHAKA 19 CHI CHICAGO 7.3 DEL NEW DELHI 20 DEN DENVER 8 KHI KARACHI 21 LAX LOS ANGELES 8.3 KBL KABUL 22 ANC ANCHORAGE 9 DXB DUBAI 23 HNL HONOLULU 9.3 THR TEHRAN 24 MID MIDWAY • SHARP assumes no responsibility, directly or indirectly, for financial losses or claims from third persons resulting from the use of this product and any of its functions, such as stolen credit card numbers, loss or alteration of stored data, etc. • The information provided in this manual is subject to change without notice. NOTICE • SHARP strongly recommends that separate permanent written records be kept of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. Therefore, SHARP assumes no responsibility for data lost or otherwise rendered unusable whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired, or any other cause. ON OFF PREV NEXT RESET switch (on the back of the unit) Stylus Display Touch Keyboard section Mode keys ENTER key Search keys • In this manual, these Mode keys are represented with icons in parentheses. Power ON/OFF key 2nd Function key Activates the second function specifically assigned to the next key tapped. ( GAME ): Game mode key ( TEL ): Telephone mode key ( MEMO ): Memo mode key ( CLOCK ): Home Clock/World Clock mode key ( CALC/CONV ): Calculation/Conversion mode key ( SCHEDULE ): Schedule mode key ( ENTER ): Enter key Key Assignments (Key) (CAPS ON) (CAPS OFF) R Z Y U P ˇ ´ IP Z rˇ lp ÓÒÖÔÕOØ ó ò ö ô õ o ø D S ˇ D E d’ S s ˇ S ˇ s I O L G É È Ë Ê E E˛ L L’ ´ Y Ÿ y´ ´ ´ ´ ´´ ´´ ´´ ÿ l Ú Ù Ü Û U U ú ù ü û u u Í Ì Ï Î í ì ï î é è ë ê (Key) (CAPS ON) (CAPS OFF) ˇe e˛ T N C ˇ ˇ ˇ T t’ CCÇ ´ ˇ c c ç A ÁÀÄÂÃÅÆA áàäâãåaˇ æa˛ R ˇZ ° ´´ ° Z ´ z ˇz z ˇ ´n n ñ NÑ N´ ˇ In Europe: This equipment complies with the requirements of Directive 89/336/EEC as amended by 93/68/ EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinie 89/336/EWG mit Änderung 93/68/ EWG. Ce matériel répond aux exigences contenues dans la directive 89/336/CEE modifiée par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijn 89/336/EEG, gewijzigd door 93/68/EEG. Dette udstyr overholder kravene i direktiv nr. 89/336/EEC med tillægnr. 93/68/EEC Quest’ apparecchio è conforme ai requisiti della direttiva 89/336/EEC come emendata dalla direttiva 93/68/EEC. Este equipamento obedece às exigências da directiva 89/336/CEE na sua versão corrigida pela directiva 93/68/CEE. Este aparato satisface las exigencias de la Directiva 89/336/CEE modificada por medio de la 93/68/CEE. Denna utrustning uppfyller kraven enligt riktlinjen 89/336/EEC så som kompletteras av 93/68/EEC. Dette produktet oppfyller betingelsene i direktivet 89/336/EEC i endringen 93/68/EEC. Tämä laite täyttää direktiivin 89/336/EEC vaatimukset, jota on muutettu direktiivillä 93/ 68/EEC. Memo Mode Notes or other pieces of information that are not appropriate for Telephone or Schedule mode can be entered for convenience. In the 1st line the same characters are allowable as in Telephone mode. In the 2nd and the 3rd lines you can enter numbers, –, and space. (36 characters or under can be entered in each line.) Storing memo entries 1. Tap to display the Memo mode screen. 2. Enter the memo item and numbers. E.g. UNION SPACE BANK ENTER 01 272-0011223 3. Press ENTER to store in the memory. CAPS MEMO? CAPS 2nd UN I ON BANK 0 1 2 7 2 – 0 0 1 1 2 2 3 – Clock Mode Home clock Home city (with “ ”) Day of the week Time Date Daylight saving time set ( with “#”) CAPS LON THU 1 – 1 – 2 0 0 4 0 – 0 0 – 0 0 2nd # Each time CLOCK is tapped, the clock switches between the Home clock and the World clock mode. (For World clock, “ ” is not displayed.) Note • This model may not be available in some countries. ZQ-P10_En030410.p65 03.4.10, 3:13 PM 1

Part Names Using the Organizer for the First Time Be sure to perform the following operations before using the Organizer for the first time. 1. Pull out to remove the isolating film on the back of the unit. 2. Press the RESET switch with a stylus. "RESET?" is displayed. 3. Tap f and press x to initialize the Organizer. Moments later, "RESET!" will be displayed, and the Organizer's memory contents will be cleared. Soon after, the Select Language screen appears. Guidance messages can be displayed in 10 languages: English, Italian, German, French, Spanish, Portuguese, Hungarian, Czech, Polish, and Greek. When the Organizer is initialized, the setting will revert to English as default. Select the desired language using > or <, then press x. When the language is set, the Home Clock will be displayed on the screen. (See "Clock Mode".) NOTES • If the Organizer is subjected to strong, extraneous electrical noises or shocks during use, an abnormal condition may occur in which no keys (including ON OFF ) will respond. Press the RESET switch, tap f, then press x to delete all the memory contents. • To minimize battery consumption, the Organizer is designed to turn its power off automatically when no key activities are detected for approximately 7 minutes. • The key touch tone can be turned on and off by tapping h !, select "KEY TONE?" using > or <, and press x. Select on/off using > or <, then press x. When the tone is activated, “ ” will appear. Entering Characters Touch Keyboard Alphabet entry mode Number entry mode • Each time f is tapped, the touch keyboard switches between the Alphabet entry mode and the Number entry mode. To tap the touch keys, use the attached stylus. • Tap towards the center of each key. • Numbers, alphanumeric letters, symbols, and “+ – × ÷ .” can be entered into the dot display area (the 1st line). • Numbers and some characters (only space, –, F, and P in Telephone mode) can be entered into the number display area (the 2nd and the 3rd lines). • Letters are entered in capital letters (“CAPS” is turned on). To enter lowercase letters, tap CAPS to turn “CAPS” off. Entering symbols and letters with an accent mark • To enter a symbol, tap SMBL repeatedly until the desired symbol appears: @#$£¥ ( )~’: /\_&<>ß!?¡¿æµ¢ • To enter a letter with an accent mark, tap the relevant key shown below repeatedly after tapping s. • Activate “CAPS” on to enter capitalized letters. • In the Greek language mode, only the capitalized letters can be entered. Making corrections Move the cursor to the character to be corrected. Enter the correct character to replace the previous one. Cursor The cursor (_) indicates the position for entering a character. Move the cursor with the cursor keys ( ). Inserting characters Each time INS is tapped, a space is inserted at the cursor position to allow character entry. Deleting characters Tap DEL to delete the character at the cursor position. Tap C•CE to clear all the characters you have entered and yet to be stored. Telephone Mode Telephone mode is composed of two directions of storage memory. Tap TEL to toggle between “1” and “2” on the display. Use these files for convenience, e.g. business and private files. A telephone entry consists of name, address, E-mail address, web address (URL) and number fields. Storing telephone entries 1. Tap TEL once or twice to display the Telephone mode screen. 2. Enter name, e.g. SMITH SPACE ROBERT, and press ENTER . 3. Enter address, e.g. f 18 SPACE f EAST SPACE ROAD, and press ENTER . 4. Enter E-mail address, e.g. SROB SMBL l (to enter “@”) SHARPSEC.COM, and press ENTER . • The E-mail address is automatically entered in lowercase letters. • To enter “@”, simply tap @ instead of SMBL . 5. Enter web address (URL), e.g. WWW.SHARP USA.COM, and press ENTER . Schedule Mode Schedule mode is used for storing schedule details (36 characters or under), date and time (year, month, day, hour, and minute). In the 1st line the same characters are allowable as in Telephone mode. 1. Storing schedule entries 1. Tap to display the Schedule mode screen. 2. Enter the details and press ENTER . 3. Enter the date and time. • The types of date and time are the same as the types set for the clock. • To enter a single-digit date or time, enter “0” and the digit (e.g. “O2”). 6. Enter phone number, and fax number if needed, e.g. 012-3456-7890 f F SPACE SPACE SPACE f 3456-7891, and press ENTER . • “STORED!” appears briefly, then the Telephone mode screen is displayed. The telephone entry is now stored. Notes • The symbol “NAME”, “ADDRESS”, “E-mail”, or “URL” is turned on while entering in each field. • To skip entry of an address, E-mail address, web address (URL), or number, press ENTER when “ADDRESS?”, “E-MAIL?”, “URL?”, or “NUMBER?” is displayed. However, entry must be made at the "NAME?" field. Allowable characters The 1st line: Name, address, E-mail address and web address (URL) Field Number of characters The 2nd and the 3rd lines: Phone number 36 characters or under Alphabetic letters, numbers, symbols, “+ – × ÷ .”, space Numbers, space, –, F (Fax), P (Pager) PRINTED IN CHINA/IMPRIMÉ EN CHINE/IMPRESO EN CHINA 03DGK (TINSE0630EHZZ) ZQ-P10 English Front sheet OPERATION MANUAL ELECTRONIC ORGANIZER ZQ-P10 3. Using World clock 1. Tap CLOCK once or twice to display the World clock (without “ ”). 2. Press > or < to select the desired city. 4. Changing the cities between Home and World clocks You can change the home city for a city in another time zone without adjusting the stored correct time. 1. Tap CLOCK once or twice to display the World clock (without “ ”). 2. Press > or < and select the desired city to be set as the new home city. 3. Tap f e to change the cities between Home and World clocks. • The previous home city is now set as the world city (without “ ”). 4. Tap CLOCK to check the home city. • The selected city in step 2 is set as the home city (with “ ”). 5. Tap CLOCK to recheck the world city, and press > or < to select the new world city, if needed. 5. Setting daylight saving time (DST: summer time) 1. Tap CLOCK once or twice to display the Home or the World clock. 2. Tap DST . “#” is displayed. The time is set 1 hour ahead. To clear DST, tap DST to clear “#”. The time is set 1 hour behind. Notes • DST can be set independently in either Home or World clock. • When DST is set for one world city, it is used for all cities displayed in World clock. 6. Setting alarms The Organizer has 3 types of alarms: 1. Daily alarm ........beeps every day at the alarm time (for 1 minute), when “ ” is turned on. 2. Hourly alarm ......beeps every hour when minutes reach “00”, when “ ” is turned on. 3. Schedule alarm ..beeps at the time for all the schedule entries (for 1 minute), when “ ” is turned on. (Refer to “Schedule Mode”.) Tap any key to stop the alarm beeping. Setting/Changing the daily alarm time 1. Tap CLOCK once or twice to display Home clock (with “ ”). 2. Tap to display the daily alarm screen. (The display differs between the 12-hour and 24-hour clock.) 3. Tap f e. 4. Enter the time. 5. Press ENTER . • The daily alarm time is set. Turning the alarms on and off An alarm sounds only when the respective symbol ( , , or ) is turned on. Display Home clock (tap CLOCK once or twice) and tap to display the daily alarm screen. Each time you tap while the daily alarm screen is displayed, the combination of symbols switches. Note • Alarms sound even when the Organizer is turned off. ALARM 0 – 0 0 CAPS 1 NAME? E-mail h a r p s e c . c om– 1 CAPS 2nd NUMBER? 2 – 3 4 5 6 – 7 8 9 0 3 4 5 6 – 7 8 9 1 – 1 SCHEDULE? 4. Press ENTER to store in the memory. Notes • Schedules for the following dates can be stored: January 1901 to December 2098. • If an attempt is made to store an entry without a date or time, or with an invalid date or time, “ERROR!” appears briefly. Enter the correct date and time and press ENTER . 2. Alarm for Schedule mode When the schedule alarm (“ ”) is turned on, it is set for all the schedule entries. Beeping sounds for 1 minute when the time for a schedule entry is reached. Tap any key to stop the alarm. The schedule alarm cannot be set for an individual entry. 1. Before setting the clock • The default setting for the date is “DD/MM/ YYYY” (day-month-year). To change the setting to “MM/DD/YYYY” (month-day-year) or “YYYY/ MM/DD” (year-month-day): 1. Tap CLOCK once or twice to display the Home clock (with “ ”). 2. Tap !, select “DATE SET” by using k or m , and press x. 3. Press > or < to select the desired type. 4. Press ENTER to store the new setting. • To change the 24-hour clock to the 12-hour clock, tap Z (“A” or “P” is displayed). Each time Z is tapped, the clock switches. • For daylight saving time/summer time, tap DST in advance (“#” is displayed on the left side of the day of the week). 2. Setting the clock 1. Tap CLOCK once or twice to display the Home clock (with “ ”). 2. Tap f e to start setting. The cursor starts to flash on the city name. 3. Press > or < to select the desired time zone. (Refer to the list of cities described below.) • Enter the city name, if needed (6 characters or under). Only one changed name for Home clock can be stored. 4. Tap to move the cursor to the day. 5. Enter the day, the month, and the year (4 digits ). • The built-in calendar extends from January 1st, 1901, to December 31st, 2098. • Tap AM/PM to select “A” (morning) or “P” (afternoon) for the 12-hour clock. (in 12- hour) 6. Enter the time (hours and minutes) 7. Press ENTER . The clock starts from “00” seconds. Notes • To enter a single-digit date or time, enter “0” and the digit (e.g. “02”). • If you enter an invalid date or time, “ERROR!” appears briefly. Enter the correct date and time and press ENTER . Zone Display City Zone Display City No. No. 0 TNG TONGA 10 MOW MOSCOW 1 WLG WELLINGTON 11 CAI CAIRO 2 NOU NOUMEA 12 PAR PARIS 3 SYD SYDNEY 13 LON LONDON 3.3 ADL ADELAIDE 14 AZ0 AZORES ISLANDS 4 TYO TOKYO 15 -2H 2hrs behind LON 5 HKG HONG KONG 16 RIO RIO DE JANEIRO 6 BKK BANGKOK 17 CCS CARACAS 6.3 RGN YANGON 18 NYC NEW YORK 7 DAC DHAKA 19 CHI CHICAGO 7.3 DEL NEW DELHI 20 DEN DENVER 8 KHI KARACHI 21 LAX LOS ANGELES 8.3 KBL KABUL 22 ANC ANCHORAGE 9 DXB DUBAI 23 HNL HONOLULU 9.3 THR TEHRAN 24 MID MIDWAY • SHARP assumes no responsibility, directly or indirectly, for financial losses or claims from third persons resulting from the use of this product and any of its functions, such as stolen credit card numbers, loss or alteration of stored data, etc. • The information provided in this manual is subject to change without notice. NOTICE • SHARP strongly recommends that separate permanent written records be kept of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. Therefore, SHARP assumes no responsibility for data lost or otherwise rendered unusable whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired, or any other cause. ON OFF PREV NEXT RESET switch (on the back of the unit) Stylus Display Touch Keyboard section Mode keys ENTER key Search keys • In this manual, these Mode keys are represented with icons in parentheses. Power ON/OFF key 2nd Function key Activates the second function specifically assigned to the next key tapped. ( GAME ): Game mode key ( TEL ): Telephone mode key ( MEMO ): Memo mode key ( CLOCK ): Home Clock/World Clock mode key ( CALC/CONV ): Calculation/Conversion mode key ( SCHEDULE ): Schedule mode key ( ENTER ): Enter key Key Assignments (Key) (CAPS ON) (CAPS OFF) R Z Y U P ˇ ´ IP Z rˇ lp ÓÒÖÔÕOØ ó ò ö ô õ o ø D S ˇ D E d’ S s ˇ S ˇ s I O L G É È Ë Ê E E˛ L L’ ´ Y Ÿ y´ ´ ´ ´ ´´ ´´ ´´ ÿ l Ú Ù Ü Û U U ú ù ü û u u Í Ì Ï Î í ì ï î é è ë ê (Key) (CAPS ON) (CAPS OFF) ˇe e˛ T N C ˇ ˇ ˇ T t’ CCÇ ´ ˇ c c ç A ÁÀÄÂÃÅÆA áàäâãåaˇ æa˛ R ˇZ ° ´´ ° Z ´ z ˇz z ˇ ´n n ñ NÑ N´ ˇ In Europe: This equipment complies with the requirements of Directive 89/336/EEC as amended by 93/68/ EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinie 89/336/EWG mit Änderung 93/68/ EWG. Ce matériel répond aux exigences contenues dans la directive 89/336/CEE modifiée par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijn 89/336/EEG, gewijzigd door 93/68/EEG. Dette udstyr overholder kravene i direktiv nr. 89/336/EEC med tillægnr. 93/68/EEC Quest’ apparecchio è conforme ai requisiti della direttiva 89/336/EEC come emendata dalla direttiva 93/68/EEC. Este equipamento obedece às exigências da directiva 89/336/CEE na sua versão corrigida pela directiva 93/68/CEE. Este aparato satisface las exigencias de la Directiva 89/336/CEE modificada por medio de la 93/68/CEE. Denna utrustning uppfyller kraven enligt riktlinjen 89/336/EEC så som kompletteras av 93/68/EEC. Dette produktet oppfyller betingelsene i direktivet 89/336/EEC i endringen 93/68/EEC. Tämä laite täyttää direktiivin 89/336/EEC vaatimukset, jota on muutettu direktiivillä 93/ 68/EEC. Memo Mode Notes or other pieces of information that are not appropriate for Telephone or Schedule mode can be entered for convenience. In the 1st line the same characters are allowable as in Telephone mode. In the 2nd and the 3rd lines you can enter numbers, –, and space. (36 characters or under can be entered in each line.) Storing memo entries 1. Tap to display the Memo mode screen. 2. Enter the memo item and numbers. E.g. UNION SPACE BANK ENTER 01 272-0011223 3. Press ENTER to store in the memory. CAPS MEMO? CAPS 2nd UN I ON BANK 0 1 2 7 2 – 0 0 1 1 2 2 3 – Clock Mode Home clock Home city (with “ ”) Day of the week Time Date Daylight saving time set ( with “#”) CAPS LON THU 1 – 1 – 2 0 0 4 0 – 0 0 – 0 0 2nd # Each time CLOCK is tapped, the clock switches between the Home clock and the World clock mode. (For World clock, “ ” is not displayed.) Note • This model may not be available in some countries. ZQ-P10_En030410.p65 03.4.10, 3:13 PM 1