Shure PG2 Manuals

C ongratulations on purchasing your Shure Performance Gear Wireless system. Shure professional audio products deliver legendary sound quality, stage-proven durability and hassle-free setup for worry-free performance. Performance Gear Wireless systems are available in a variety of configurations for handheld, guitar, headset, and presentation applications. Startup channel ready audio Internal Diver Busy Indicator When selecting channels, a flashing dash indicates interference from television broadcasts, electronic devices or other wireless systems. CHANNEL 6 MUTE channel mute channel ready audio Internal Antenna Diversity channel mute channel mute Accessing Gain Switch channel mute Testing Audio Talk or sing into the microphone or play instrument. 0dB For instrument or quiet to normal vocal performance (default). –10dB Use if audio is distorted due to high vocal or instrument levels. mic Use for headworn or lavalier microphones (PG1 only). CHANNEL D"MIC channel ready audio Internal Diver english Changing Channels Press and hold the channel button until the display starts flashing. Internal Anten channel ready audio While the display is flashing, press the channel button. The channel is active once the display stops flashing. Receiver channel mute channel ready audio Internal Antenna Diversity channel mute and transmitter channels should match. Multiple gain settings are available on the PG1 and PG2 transmitters. To change gain settings, see below. Follow these simple steps to check for interference and to set your receiver and transmitter to the same channel. If you haven’t installed the battery, do it now and leave the cover off. Turn ON the handheld or bodypack transmitter by pressing the power button. The channel display should illuminate. The ready LED on the receiver should be illuminated. Replace battery cover. Check to see that the transmitter and the receiver display the same channel. channel ready audio Internal Diversity Antenna Syste channel mute Internal Anten channel ready audio ©2008 Shure Incorporated 27EN8865 (Rev. 5) Printed in U.S.A. The audio LED on the receiver should flicker green or amber, if red, adjust the Gain Switch. If this occurs, change the channel. Lock system controls to prevent accidental muting. To lock controls: Turn transmitter off. Remove Battery Cover. Press and hold Channel Button. Press and release Power/Mute butt Power/Mute LED will flash red and green. To unlock controls: Press and hold Power/Mute button down u Power/Mute LED flashes red and green. Locking and Unlocking Transmitter Controls It turns off after ten seconds to conserve battery. System Components audio ready channel Diversity Antenna System PG4 audio ready channel audio ready channel PG1 Bodypack Transmitter PG2 Handheld Transmitter PG4 Wireless Receiver PG88 Dual Wireless Receiver PS21 Power Supply PG185 Lavalier Mic Features PG30 Headworn Mic Turn OFF the microphone or bodypack. If left on, it will create a false busy indicator. Plug in the power supply. 1 2 There is no power switch. The channel display should illuminate. 3 If you see the Busy Indicator (a flashing dash) change the channel. 4 Press and hold down the channel button until the display begins flashing. Wait for the channel display to stop flashing. 5 6 7 8 LED Status TRANSMITTER LED COLOR STATUS Green Ready Amber Mute on Red Battery low* Flashing Red on startup Battery is dead Flashing Green and Red Controls locked Flashing Amber and Red Mute on, battery low RECEIVER AUDIO LED COLOR INDICATES Green Normal signal strength Amber Strong signal Red Peak signal READY DISPLAY COLOR INDICATES Green System is ready * See “Changing Battery”