Shure SE110 Manuals

SE110 Sound Isolating™ Earphones Balanced MicroSpeakers and a stylish sound isolating design to deliver a rich, lifelike listening experience, the Shure SE110 is an ideal portable listening device upgrade. An included modular cable and interchangeable Sound Isolating™ sleeves provide a comfortable, personalized fit. The carrying case further enhances the portability of these lightweight earphones. ­©2007, Shure Incorporated 27EN3254 (Rev. 2) ­Printed in U.S.A. To change earphone sleeve, twist and pull sleeve to remove it from the nozzle. Push new sleeve onto nozzle until you feel it slide completely over barb. If any part of the nozzle is exposed, sleeve is not properly installed. Replace sleeves they do not grip the nozzle tightly Tighten the cable and take up slack by raising the cable sleeve. Over the ear in back Over the ear in front Soft Foam Sleeves When using the foam sleeves, compress the sleeve between your fingers before inserting it into the ear canal. Hold the earphone in place for about ten seconds while the foam expands and creates a tight seal. Soft Flex Sleeves In small, medium, and large sizes. Made from pliable rubber. Note: carefully slide sleeve over earphone nozzle barb for a secure grip. Grasp the body of earphone and gently twist to remove. Nozzle Wire Loop When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter. Cleaning Tool Note: Do not pull on cable to remove earphone. Suggested methods for wearing the earphones are illustrated below. WEARING THE EARPHONES If the earphone seems to be lacking in low frequency response (bass check the tightness of the seal between the earphone and your ear, o try one of the other sleeve options. INSERTING THE EARPHONES Nozzle Barb REMOVING THE EARPHONES Your earphones come with a selection of sleeves. Make sure the sleeve you choose is easy to insert into your ear, fits comfortably, and is easy to remove from your ear. CHOOSING AN EARPHONE SLEEVE If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire loop end of cleaning tool. CLEANING THE EARPHONE NOZZLE Warning: Do not push the earphone sleeve beyond the ear canal open Nozzle Barb Warning: The wax removal loop is only to be used to clean earphones. Any other use, such as using the tool to clean ears, could result in injury. Cable Sleeve Straight down in front SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A. Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446 Europe, Middle East, Africa: Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific: Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055 SE110 Earphone User Guide Sensaphonics Hearing Conservation Toll Free: (877) 848-1714 660 N. Milwaukee Avenue In Chicago: (312) 432-1714 Chicago, IL 60622 e-mail: [email protected] www.sensaphonics.com Transducer type Balanced armature drivers Sensitivity (at 1kHz) 113 dB SPL/mW Impedance (at 1kHz) 27 W DC Resistance 18.5 W Frequency Range 22Hz - 17.5kHz Input connector 3.5 mm (1/8 in.) gold-plated stereo pl Net weight 30g (1.05 oz) Operational temperature -18° C to 57° C (0° F to 135° F) Storage temperature -29° C to 74° C (-20° F to 165° F) TECHNICAL SPECIFICATIONS Those who use earphones regularly for extended periods of time ofte find custom-fit molded sleeves offer the best comfort and sound isola Ask a Hearing Health Care Professional about creating custom molde sleeves for your earphones. For more information, contact: CUSTOM EARPHONE SLEEVES Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety. MAINTENANCE  Keep the earphones and sleeves as clean and dry as possible.  To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing.  Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfectants.  Do not expose earphones to extreme temperatures.  Replace the sleeves if they do not fit properly. x Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product failure. ACCESSORIES For information about earphone accessories (listed below) and other Shure products visit: www.shure.com • Replacement Sleeves • Extension Cables • Carrying Cases • Push To Hear (PTH) • Music Phone Adapter • Volume Control CERTIFICATION Eligible to bear CE marking. Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN 55103 (1996) Parts 1 and 2, for residential (E1) and light industrial (E2) environments. • Soft Carrying Case • Fit Kit: contains soft foam and soft flex sleeves plus a cleaning tool • Stereo Extension Cable - 3 ft. (91 cm) FURNISHED ACCESSORIES