Siemens RDG100T Manuals

s RDG100, RDG110, RDG110U RDG100T, RDG160T, RDG160TU RDG100T/H Room thermostats with LCD for wall mounting RDG100 RDG100T RDG110, RDG110U RDG160T, RDG160TU RDG100T/H Basic Documentation Edition 4.1 CE1P3181en 2015-07-29 Building Technologies

s RDG1… RDG100T RDG100T/H Room thermostats with LCD for wall mounting RDG100, RDG100T, RDG110, RDG140, RDG160, RDG100T/H Basic Documentation Edition 2.0 CE1P3181en 14 Dec 2011 Building Technologies

s Operating Instructions en RDG100T RDG160T RDG160TU RDG100T / RDG160T / RDG160TU – the electronic room thermostat that allows you to set the ideal room temperature you want. The thermostat provides Comfort, Economy and Protection mode and, in addition, an Auto Timer mode with 8 programmable timers. The fan operates either in Automatic mode or at the selected speed when using Manual mode. You can either rely on the factory settings or make adjustments that suit your individual needs. Main display Operating mode Room temperature Heating mode Room temperature in degrees Celsius Electric heater on Room temperature in degrees Fahrenheit Cooling Button lock active Comfort mode Alert indicator Economy mode Condensation in the room Auto timer Temporary timer function active Protection mode: Protection against frost Indicator for selecting mode Weekday 1 = Monday 7 = Sunday Operating mode button Setting time and weekday Setting the auto timers Fan mode Program mode button Current time of day Automatic T Fan mode button Escape (Cancel) Manual Low Medium High Rotary knob Confirmation (OK) Changing the room temperature • The room temperature setpoint can be adjusted with the rotary knob when Comfort mode is active or with • Turn the rotary knob clockwise (+) to increase, or counterclockwise (-) to decrease the current room temperature setpoint for Comfort mode The setting range is from 5...40 °C (41 … 104 °F), unless limited by parameters P09 and P10 (for parameter settings, see reverse side). Adjusting the fan speed Low Medium High • Press the fan mode button until the desired fan mode is reached • In Automatic mode , the fan speed is automatically selected by the thermostat depending on the setpoint and the actual room temperature. When the room temperature reaches the setpoint, the fan stops (factory setting) or keeps running at low speed (P15). • In Manual mode, the fan operates independently and always runs at the same speed: Low / medium / high Notes: If desired, you can change the fan mode selector option via P03: Manually only, or manually including Protection mode. Use P15 to set the fan speed in dead zone. Changing from heating to cooling mode • Depending on the type of plant, the changeover from heating to cooling (or vice versa) is made either automatically by a changeover sensor or a remote changeover switch, or manually by pressing the operating mode button (see parameter P01) • To select cooling or heating manually (P01=2), press the operating mode button until the desired mode appears • With automatic changeover or continuous heating / cooling, symbols / indicate that the system currently operates in heating or cooling mode • With manual changeover, symbol appears, indicating that the system currently operates in heating or cooling mode Changing the operating mode Press the operating mode button until symbol appears, indicating that Protection / Comfort / Auto Timer / Economy mode is selected. 1. Protection mode • In protection mode, the plant stops operating. If the room temperature falls below 8 °C (46 °F), heating is switched on however to protect the room against frost The setpoints for Protection mode can be changed by your HVAC installer if desired: Changes made by installer: Frost protection: _________ °C / °F Heat protection: __________ °C / °F 2. Comfort mode • In Comfort mode, the thermostat maintains the setpoint which can be readjusted with the rotary knob 3. Auto Timer mode • In Auto Timer mode, the controller automatically switches over between Comfort and Economy according to the 8 preprogrammed timers 4. Economy mode • When selecting Economy mode, make sure that parameter P02 is set to 2 • In Economy mode, the room temperature is maintained at a lower or higher setpoint, thus saving energy and money! You can change the preselected setpoint by adjusting parameters P11 and P12 (for parameter settings, see reverse side) Important: The setpoint for Economy can be set to OFF. This means that the thermostat is deactivated! Risk of frost, i.e. no protective heating or cooling function is provided! Setting the time of day and the weekday 1. Press the program mode button for programming. 2. Press button (OK) to enter the setting mode for the time of day. 3. The time digits start blinking. Turn the rotary knob clockwise or counterclockwise to set the time of day. If the current time of day is in 24-hour format and you wish to change it to the 12-hour format, turn the knob clockwise passed 23:59 or counterclockwise passed 00:00. Vice versa back to the 24-hour format. 4. Confirm the time of day by pressing button and the weekday indicator starts blinking. 5. Turn the rotary knob clockwise or counterclockwise to set the current weekday. 6. Confirm the current weekday by pressing button (OK). 7. Press button (Esc) to leave the program mode. Notes: After a power failure, the time of day starts blinking to indicate power was lost. However, the auto timer continues to run with the time before the power failure occurred. Select the setting mode to readjust the time if needed.

Operating Instructions RDG100T RDG100T – the electronic room thermostat that allows you to set the ideal room temperature you want. The thermostat provides Comfort, Energy Saving and Protection mode and, in addition, an Auto Timer mode with 8 programmable timers. The fan operates either in Automatic mode or at the selected speed when using Manual mode. You can either rely on the factory settings or make adjustments that suit your individual needs. Main display Operating mode Room temperature Heating mode Room temperature in degrees Celsius Electrical heater on Room temperature in degrees Fahrenheit Cooling mode Button lock active Comfort mode Alert indicator Energy Saving mode Condensation in the room Auto timer Temporary timer function active Weekday 1 = Monday 7 = Sunday Protection mode: Protection against frost Setting time and weekday Indicator for selecting mode Setting the auto timers Fan mode Current time of day Automatically Escape (Cancel) Confirmation (OK) Operating mode button Program mode button Fan mode button Rotary knob Manually Changing the room temperature • The room temperature setpoint can be adjusted with the rotary knob when Comfort mode is active or with • Turn the rotary knob clockwise (+) to increase, or counterclockwise (-) to decrease the current room temperature setpoint for Comfort mode The setting range is from 5...40 °C, unless limited by parameters P09 and P10 (for parameter settings, see reverse side). Adjusting the fan speed • Press the fan mode button until the desired fan mode is reached • In Automatic mode , the fan speed is automatically selected by the thermostat depending on the setpoint and the actual room temperature. When the room temperature reaches the setpoint, the fan keeps running at low speed (factory setting) • In Manual mode, the fan operates independently and always runs at the same speed: Low / medium / high Note: If desired, you can change the fan mode selector option via P03: Manually only, or manually including Protection mode. Changing from heating to cooling mode • Depending on the type of plant, the changeover from heating to cooling (or vice versa) is made either automatically by a changeover sensor or a remote changeover switch, or manually by pressing the operating mode button (see parameter P01) • To select cooling or heating manually (P01=2), press the operating mode button until the desired mode appears • With automatic changeover or continuous heating / cooling, symbols / indicate that the system currently operates in heating or cooling mode • With manual changeover, symbol appears, indicating that the system currently operates in heating or cooling mode Changing the operating mode Press the operating mode button until symbol appears, indicating that Protection / Comfort / Auto Timer / Energy Saving mode is selected. 1. Protection mode • In protection mode, the plant stops operating. If the room temperature falls below 8 °C, heating is switched on however to protect the room against frost The setpoints for Protection mode can be changed by your HVAC installer if desired: Changes made by installer: Frost protection: _________ ˚C Heat protection: __________˚C 2. Comfort mode • In Comfort mode, the thermostat maintains the setpoint which can be readjusted with the rotary knob 3. Auto Timer mode • In Auto Timer mode, the controller automatically switches over between Comfort and Energy Saving mode according to the 8 preprogrammed timers 4. Energy Saving mode • When selecting Energy Saving mode, make sure that parameter P02 is set to 2 • In Energy Saving mode, the room temperature is maintained at a lower or higher setpoint, thus saving energy and money! You can change the preselected setpoint by adjusting parameters P11 and P12 (for parameter settings, see reverse side) Important: The setpoint for Energy Saving mode can be set to OFF. This means that the thermostat is deactivated! Risk of frost, i.e. no protective heating or cooling function is provided! Setting the time of day and the weekday 1. Press the program mode button for programming. 2. Press button (OK) to enter the setting mode for the time of day. 3. The time digits start blinking. Turn the rotary knob clockwise or counterclockwise to set the time of day. If the current time of day is in 24-hour format and you wish to change it to the 12-hour format, turn the knob clockwise passed 23:59 or counterclockwise passed 00:00. Vice versa back to the 24-hour format. 4. Confirm the time of day by pressing button and the weekday indicator starts blinking. 5. Turn the rotary knob clockwise or counterclockwise to set the current weekday. 6. Confirm the current weekday by pressing button (OK). 7. Press button (Esc) to leave the program mode. Note: After a power failure, the time of day starts blinking to indicate power was lost. However, the auto timer continues to run with the time before the power failure occurred. Select the setting mode to readjust the time if needed. Heronhill - for all your Siemens requirements Tel: 01823 665660 www.heronhill.co.uk Fax: 01823 665807

CE1N3181en 2017-11-20 Building Technologies s 3181 RDG100 RDG110 RDG110U RDG100T RDG100T/H RDG160T RDG160TU Wall-mounted room thermostats with LCD RDG1.. for fan coil unit applications for universal applications for use with compressors in DX-type equipment ∂ RDG100..: Operating voltage AC 230 V, On/Off, 3-positon or PWM control outputs ∂ RDG110: Operating voltage AC 230 V, On/Off relay (SPDT) outputs ∂ RDG110U: Operating voltage AC/DC 24 V, On/Off relay (SPDT) outputs ∂ RDG100../RDG110..: Output for 1-speed and 3-speed ∂ RDG160T..: Operating voltage AC/DC 24 V, DC 0…10 V or On/Off control outputs ∂ RDG160T..: Output for 1-speed, 3-speed or ECM fan DC 0...10 V ∂ Operating modes: Comfort, Economy and Protection ∂ Automatic or manual fan speed ∂ 3 multifunctional inputs for keycard contact, external sensor, etc ∂ Automatic or manual heating/cooling changeover ∂ Adjustable commissioning and control parameters ∂ Minimum and maximum setpoint limitation ∂ Backlit display Additional features of RDG100T, RDG160T.., RDG100T/H: ∂ Infrared remote control receiver ∂ Auto Timer mode with 8 programmable timers ∂ Auto timer can be disabled via P02 ∂ Auto timer can be disabled via DIP switches (RDG160T..) ∂ Landscape design (RDG100T/H only) ∂ Selectable relay output functions (RDG160T..)

N3181en May 28. 2009 Building Technologies 3 181 RDG100 / RDG110 RDG140 / RDG160 RDG100T Room thermostats with LCD for wall mounting RDG1… for fan coil unit applications for universal applications for use with compressors in dx type equipment • RDG100...: Operating voltage AC 230 V, ON/OFF, 3-position or PWM control outputs • RDG110: Operating voltage AC 230 V, ON/OFF relay (SPDT) outputs • RDG140 / RDG160: Operating voltage AC 24 V, DC 0…10 V control outputs • Operating modes: Comfort, Energy Saving and Protection • Automatic or manual fan speed • Output for 1-speed, 3-speed or ECM fan DC 0...10 V (RDG160) • 3 multifunctional inputs for keycard contact, external sensor, etc. • Automatic or manual heating / cooling changeover • Adjustable commissioning and control parameters • Minimum and maximum setpoint limitation • Backlit display Additional features of RDG100T: • Infrared remote control receiver • Auto Timer mode with 8 programmable timers

Answers for infrastructure. Answers for infrastructure. RDG/RDF – room thermostats Application Guide