SIIG AV-GM06X3-S1 Manuals

8x8 DVI Matrix Switcher with HDCP Support P/N: AV-GM06X3-S1 Safety and Notice The AV-GM06X3-S1 8x8 DVI Matrix Switcher with HDCP Support has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AV-GM06X3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. ● Follow all instructions and warnings marked on this unit. ● Do not attempt to service this unit yourself, except where explained in this manual. ● Provide proper ventilation and air circulation and do not use near water. ● Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. ● Use only the power adapter and power cords and connection cables designed for this unit. ● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. TABLE OF CONTENTS INTRODUCTION................................................................................................................. 1 FEATURES ......................................................................................................................... 1 PACKAGE CONTENTS ...................................................................................................... 1 SPECIFICATIONS .............................................................................................................. 2 PANEL DESCRIPTIONS ..................................................................................................... 3 CONNECTION DIAGRAM .................................................................................................. 5 DIP SWITCH ....................................................................................................................... 6 HARDWARE INSTALLATION ............................................................................................. 8 CHANNEL CONTROL ........................................................................................................ 9 WARRANTY ..................................................................................................................... 16 1 INTRODUCTION The AV-GM06X3-S1 8x8 DVI Matrix Switcher with HDCP Support DVI Matrix provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1 channel) digital audio from any of the eight DVI/HDMI sources to the any eight displays at the same time. This solution is well suited for use in home theater, conference room presentation systems, or other similar setting or application. FEATURES ● State-of-the-art Silicon Image (Founder of HDMI) chipset embedded for upmost compatibility and reliability ● DVI 1.0 ● HDCP compliant ● Allows any source to be displayed on multiple displays at the same time ● Allows any DVI display to view any DVI source at any time ● Supports 7.1 channel digital audio ● Supports default DVI EDID and learns the EDID of displays ● The matrix master can switch every output channels to any DVI inputs by push-in button, IR remote controller or RS-232 control ● Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively ● Fast response time – 2~5 seconds for channel switch PACKAGE CONTENTS ● 1x AV-GM06X3-S1 ● 1x IR receiver (20-60kHz) ● 1x UL AC C13 power cord ● 1x IR Remote control ● 1x Rack-mounting ear set ● 1x Installation software CD ● 1x User Manual 2 SPECIFICATIONS Model Name AV-GM06X3-S1 Technical Role of usage True 8x8 matrix DVI compliance DVI 1.0 / HDMI HDCP compliance Yes Video bandwidth Single-link 165MHz [4.95Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 12-bit color Audio support Surround sound (up to 7.1ch) or stereo digital audio ESD protection [1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge] [2] Core chipset — ±8kV PCB stack-up 4-layer board [impedance control — differential 100Ω; single 50Ω] Input 8x DVI + 1x RS-232 + Ethernet Output 8x DVI DVI Input selection Push button / IR remote / RS-232 IR remote control Electro-optical characteristics: τ = 25° / Carrier frequency: 36~40kHz DVI connector Type A [19-pin female] RS-232 connector DE-9 [9-pin D-sub female] DIP switch [SW1~SW8] 2-pin for EDID learning, audio/video settings [SW Main] 4-pin operation mode & firmware update Mechanical Housing Metal enclosure Dimensions [H x W x D] Model 88 x 440 x 320mm [3.5" x 1'5.3" x 1'] Package 592 x 500 x 230mm [1'11" x 1'8" x 9.1"] Weight Model 6kg [13.2 lbs] approx. Package 7kg [15.4 lbs] approx. Fixedness 2U rack-mountable Power supply AC Power 100-240V Power consumption 60 Watts [max] Operation temperature 0~40°C [32~104°F] Storage temperature -20~60°C [-4~140°F] Relative humidity 20~90% RH [no condensation]

4x8 HDMI Matrix Switcher with Full 3D Support P/N: AV-GM07C3-S1 Safety and Notice The AV-GM07C3-S1 4x8 HDMI Matrix Switcher with Full 3D Support has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AV-GM07C3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. ● Follow all instructions and warnings marked on this unit. ● Do not attempt to service this unit yourself, except where explained in this manual. ● Provide proper ventilation and air circulation and do not use near water. ● Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. ● Use only the power adapter and power cords and connection cables designed for this unit. ● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. TABLE OF CONTENTS INTRODUCTION................................................................................................................. 1 FEATURES ......................................................................................................................... 1 PACKAGE CONTENTS ...................................................................................................... 1 SPECIFICATIONS .............................................................................................................. 3 PANEL DESCRIPTIONS ..................................................................................................... 4 DIP SWITCH ....................................................................................................................... 6 HARDWARE INSTALLATION ............................................................................................. 8 CONNECTION DIAGRAM .................................................................................................. 8 OPERATION AND IR CONTROL ........................................................................................ 9 EDID LEARNING .............................................................................................................. 14 FAQ .................................................................................................................................. 16 WARRANTY ..................................................................................................................... 17 1 INTRODUCTION The AV-GM07C3-S1 4x8 HDMI Matrix Switcher with Full 3D Support provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1 channel) digital audio from any of the four HDMI sources to the any eight displays at the same time. This solution is well suited for use in home theater, conference room presentation systems, or other similar setting or application. FEATURES ● Support HDMI Deep Color & full 3D ● HDCP compliant ● Allows any source to be displayed on multiple displays at the same time ● Allows any HDMI display to view any HDMI source at any time ● Supports 7.1 channel digital audio ● Supports default HDMI EDID and learns the EDID of displays ● The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote controller or RS-232 control ● Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively ● Fast response time – 2~5 seconds for channel switch PACKAGE CONTENTS ● 1x AV-GM07C3-S1 ● 1x IR receiver ● 1x Rack-mounting ear set ● 1x UL AC C13 power cord 2 ● 1x IR remote control ● 1x Installation CD ● 1x User Manual