SIIG AV-GM0783-S1 Manuals

4x4 HDMI & Full 3D support over CAT5 Matrix with IR Pass-through To avoid EMI issue, complete STP Cat6 cable is strongly recommended! P/N: AV-GM0783-S1 Safety and Notice The AV-GM0783-S1 4x4 HDMI & Full 3D support over CAT5 Matrix with IR Pass-through has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AV-GM0783-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. ● Follow all instructions and warnings marked on this unit. ● Do not attempt to service this unit yourself, except where explained in this manual. ● Provide proper ventilation and air circulation and do not use near water. ● Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. ● Use only the power adapter and power cords and connection cables designed for this unit. ● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. TABLE OF CONTENTS INTRODUCTION................................................................................................................. 1 FEATURES ......................................................................................................................... 1 SPECIFICATIONS .............................................................................................................. 2 PACKAGE CONTENTS ...................................................................................................... 4 PANEL DESCRIPTIONS ..................................................................................................... 4 Transmitting unit ...................................................................................................... 4 Receiving unit .......................................................................................................... 5 DIP SWITCH ....................................................................................................................... 7 IR PASS-THROUGH ........................................................................................................... 9 HARDWARE INSTALLATION ........................................................................................... 10 CONNECTION DIAGRAM ................................................................................................ 11 OPERATION AND IR CONTROL ...................................................................................... 12 Source Side ........................................................................................................... 12 Display Side .......................................................................................................... 19 EDID LEARNING .............................................................................................................. 21 IR DISCRETE CODE ........................................................................................................ 22 FAQ .................................................................................................................................. 24 NOTICE ............................................................................................................................ 26 WARRANTY ..................................................................................................................... 27 1 INTRODUCTION The AV-GM0783-S1 4x4 HDMI & Full 3D support over CAT5 Matrix with IR Pass-through provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1-channel) digital audio from any of the four HDMI sources to the remote displays at the same time. Through low cost Cat-5/5e/6 LAN cables, not only high quality video and audio can be transmitted to the display sites, but also users can switch among four HDMI sources using the push-in button or remote control. With single power design at the source site, each remote module is easily installed without power supply. Furthermore, the built-in IR extension function makes users at display site access the DVD player, PS3 or any HDMI supported devices directly! FEATURES ● Support HDMI Deep Color & full 3D ● HDCP compliant ● Allows any source to be displayed on multiple displays at the same time ● Allows any HDMI display to view any HDMI source at any time ● Supports 7.1 channel digital audio ● Supports default HDMI EDID and learns the EDID of displays ● The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote control, or RS-232 control ● Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from remote receiver to matrix master ● Allows to control matrix master through IR remote control at remote receiver’s site ● Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI source device (such as PS3), better grade HDMI display (such as Sony X-series HDTV), and better quality solid CAT6 cable ● Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively ● Fast response time – 2~5 seconds for channel switch 2 SPECIFICATIONS Model Name AV-GM0783-S1 Technical MA-5144 MA-5144RX Role of usage True 4x4 matrix switcher Transmitter [TX] Receiver [RX] HDMI compliance HDMI Deep Color & full 3D HDCP compliance Yes Video bandwidth Single-link 225MHz [6.75Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 36-bit color Audio support Surround sound (up to 7.1ch) or stereo digital audio HDMI over CAT5 transmission range Full HD (1080p): 35m (115ft) [CAT5e] / 40m (130ft) [CAT6] HD (720p/1080i): 50m (165ft) [CAT5e] / 55m (180ft) [CAT6] HDMI equalization N/A 8-level digital rotary control Input TMDS signal 1.2 Volts [peak-to-peak] Input DDC signal 5 Volts [peak-to-peak, TTL] ESD protection [1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge] [2] Core chipset — ±8kV PCB stack-up 4-layer board [impedance control — differential 100Ω; single 50Ω] Input 4x HDMI 1x RS-232 1x RJ-45 TMDS 1x RJ-45 DDC 1x IR socket for IR receiver Output 4x RJ-45 TMDS 4x RJ-45 DDC 5x IR socket for IR blaster 1x HDMI HDMI Input selection Push-in button / IR remote control / RS-232 control Push-in button / IR remote control HDMI source control Controllable via IR pass-through from IR receiver at RX to IR blaster at TX IR remote control Electro-optical characteristics: = 25° / Carrier frequency: 20-60kHz HDMI connector Type A [19-pin female] RJ-45 connector WE/SS 8P8C with 2 LED indicators RS-232 connector DE-9 [9-pin D-sub female] 3.5mm connector Earphone jack for IR blaster Earphone jack for IR receiver