SIIG AV-GM07R3-S12 Manuals

4X4 HDBaseT Lite Matrix with PoC P/N: AV-GM07R3-S12 Safety and Notice The AV-GM07R3-S12 4x4 HDBaseT Lite matrix with PoC has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AV-GM07R3-S12 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. ● Follow all instructions and warnings marked on this unit. ● Do not attempt to service this unit yourself, except where explained in this manual. ● Provide proper ventilation and air circulation and do not use near water. ● Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. ● Use only the power adapter and power cords and connection cables designed for this unit. ● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. INTRODUCTION The AV-GM07R3-S12 4x4 HDBaseT Lite matrix with PoC provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1-channel) digital audio from any of the eight HDMI sources to the remote displays at the same time. Through only one low cost Cat-5/5e/6 LAN cables, not only high quality video and audio can be transmitted to the display sites, but also users can switch among eight HDMI sources using the push button or remote control. Furthermore, the built-in IR extension function makes users at display site access the DVD player, PS3 or any HDMI supported devices directly! In addition, AV-GM07R3-S12 also supports PoC (Power over Cable) which can power both units from TX with power supply. FEATURES ● Supports HDMI Deep Color & full 3D (HDBaseT Technology) ● Extends the transmission up to 60m (198ft) from the HDMI source at Full HD 1080p 48-bit ● Supports PoC(Power over Cable) which can power both units from TX side with power supply ● HDCP compliant ● Bi-directional IR pass-though ● Allows controlling local HDMI sources or display through control path ● Allows to control main matrix center through control line at remote receiver ● Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission ● Allows any source to be displayed on multiple displays at the same time ● Allows any HDMI display to view any HDMI source at any time ● Supports 7.1 channel digital audio ● Supports default HDMI EDID and learns the EDID of displays ● The matrix master can switch every output channels from any HDMI inputs by Push button, IR remote control, RS-232 and IP control, web-interface control ● Easy installation with rack-mounting ● Fast response time – 2~4 seconds for channel switch PACKAGE CONTENTS ● 1x AV-GM07R3-S12 ● 1x DC 24V 3.75A ● 5x IR receiver ● 4x IR blaster* ● 1x Rack-mounting ear set ● 1x IR Remote control* ● 1x Installation software CD ● 1x User Manual SPECIFICATIONS Model Name AV-GM07R3-S12 Technical AV-GM07R3-S12 CV-745V Role of usage True 4x4 matrix switcher Transmitter [TX] Receiver [RX] HDMI compliance HDMI Deep Color & full 3D HDCP compliance Yes Video bandwidth Single-link 225MHz [6.75Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 Audio support Surround sound (up to 7.1ch) or stereo digital audio PoC support YES HDMI over UTP transmission range 1080p@60 60m (198ft) [CAT.X] Input TMDS signal 1.2 Volts [peak-to-peak] Input DDC signal 5 Volts [peak-to-peak, TTL] ESD protection Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge] PCB stack-up 4-layer board [impedance control — differential 100Ω; single 50Ω] Input 4x HDMI / 1x RS-232 / 1x RJ-45 for IP Control / 5x IR socket for IR receiver 1x RJ-45(HDBaseT) / 1x IR socket for IR receiver Output 4x RJ-45(HDBaseT) / 4x HDMI / 5x IR socket for IR blaster 1x HDMI / 1x IR socket for IR blaster HDMI Input selection Push button / IR remote control / RS- 232 control / IP control IR remote control HDMI source control Controllable via IR pass-through from IR receiver at RX to IR blaster at TX IR remote control Electro- -56kHz HDMI connector Type A [19-pin female] RJ-45 connector WE/SS 8P8C RS-232 connector DE-9 [9-pin D-sub female] N/A 3.5mm connector Earphone jack for IR blaster [All IR Out] IR signal from all outputs [IR1~IR4] IR control on individual source device Earphone jack for IR receiver [System IR] Receives IR commands from remote control [IR1~IR4] Receives IR commands from individual remote control Earphone jack for IR blaster [IR] IR control on individual display device Earphone jack for IR receiver [IR] Receives IR commands from remote control