SIIG CE-H24W11-S1 Manuals

4x4 HDMI 2.0 4K HDR Matrix Switch with Cloud Control User Manual 04-1197A P/N: CE-H24W11-S1 2 Safety and Notice The 4x4 HDMI 2.0 4K HDR Matrix Switch has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the 4x4 HDMI 2.0 4K HDR Matrix Switch should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. • Follow all instructions and warnings marked on this unit. • Do not attempt to service this unit yourself, except where explained in this manual. • Provide proper ventilation and air circulation and do not use near water. • Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. • Use only the power adapter and power cords and connection cables designed for this unit. • Do not use liquid or aerosol cleaners to clean this unit. • Always unplug the power to the device before cleaning. Package contents • 4x4 HDMI 2.0 4K HDR Matrix Switch • Power adapter DC 5V / 4A • IR Receiver • IR Remote control • Rack-mounting ear set • User Manual 3 Features • HDMI2.0a compliant • Supports 4K2K@60 4:4:4 8bits • Supports HDR*, which is 4K2K@60 4:2:0 10bits • Supports resolution downscaling from 4K2K to 1080P • HDCP1.4 & HDCP 2.2 compliant • Single-link 594MHz [18Gbps] • Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge] • Allows any source to be displayed on multiple displays at the same time • Allows any HDMI display to view any HDMI source at any time • Supports 7.1 channel digital audio • Supports default HDMI EDID and learns the EDID of displays to matrix switcher • The matrix switcher can switch every output channels from any HDMI inputs by Push button, IR remote control, RS-232, IP control, cloud & Echo control. • Easy installation with rack-mounting • Fast response time – 2~3 seconds for channel switch Thank You for your purchase! 1. NOT supports (1) Resolution downscaling from 4K2K@60 4:2:2 to 1080P (2) Frame rate conversion (3) 4K2K@60 4:2:2 to 4K2K@60 4:2:0 2. Splitter can bypass 4K HDR data content, but can NOT process it and make HDR content 100% fit into 1080p 4 Layout 1. Power Switch: 2. Selected Source Status LED: When users use port channel push button, the indicator LED will show the selected source. 3. Port 1-4 Channel Push Button: Select input channel 4. Source Status: Input source detection LED 5. IR SENSOR: for receiving the IR commands from IR remote * USB and RS-232 port cannot be used at the same time. Rear Panel 6. INPUT 1-4: HDMI inputs 7. OUTPUT 1-4: HDMI outputs 8. System IR Receiver: Ext. IR receiver 9. Micro USB: Micro-USB port for F/W update 10. Ethernet: Ethernet control port 11. Power Jack: DC 5V/4A 12. RS-232: for software control and firmware update Front Panel