Silver Cross ZEST Manuals

Zest Instructions—Words UK - FR - DE - GR - IT - ES - POR - PL - FL - RUS PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE all-guides com UK - FR - DE - GR - IT - ES - POR - PL - FL - RUS These instructions are important. Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. Your Zest pushchair is a high quality Silver Cross product. It meets current safety standards and care and regular light maintenance will ensure long service. This vehicle is intended for children from 6 months and up to 15kg. If somebody unfamiliar is using your Zest always ensure that they read these instructions carefully so that they understand how the product works best. Always read all the instructions provided carefully and remember, the safety of your child is your responsibility. WARNING: It may be dangerous to leave your child unattended. Contents Your Zest pushchair includes the following components, please check that you have all the items before proceeding: 1.1 Zest pushchair chassis 1.2 Zest hood 1.3 Zest shoulder strap 1.4 Zest rain cover 1.5 Zest front wheel assembly x2 Assembling the Zest 2.1 Attach the swivel wheels by locating the wheel under the plastic attachment pin. Slide the wheel upwards and press until the wheel clicks into position. WARNING: Check the wheel is secure by pulling gently downwards. Repeat on both sides. Your Zest pushchair is now ready to be unfolded. 2.2 Locate the locking catch on the side of the pushchair and lift to release from the locking stud. 2.3 The pushchair can now be opened by lifting the handles upwards and the wheels will naturally fall to the floor. 2.4 Finally, press down gently upon the rear locking catch (positioned between the rear wheels) to lock your pushchair WARNING: Failure to do this will cause damage to your pushchair. Place the pushchair on a flat surface and ensure that the pushchair moves freely. 2.5 To fit your Zest hood locate the “C” clips on the hood. Now attach to the Zest chassis by pressing the “C” clips over and around the tubing ensuring it locks into the correct position over the plastic fabric connection moulding. Fasten the velcro flaps around the tube to fix the hood in place then fold the side velcro flaps down to fully secure. 2.6 Your Zest hood can be opened and folded away by lowering or raising the hood tensioner indicated in illustration (2.6). Please note when folding your Zest you should always ensure the hood is folded away. Failure to do this could result in damage to your Zest. Your Zest pushchair is now ready for use. 2.7 Your Zest pushchair has a multi position calf support. Locate the adjustment buttons at either side of the calf support. These can be operated by depressing both buttons simultaneously and either lifting or lowering to the desired position. 2.8 Your Zest pushchair is supplied with a shoulder strap attached. To detach the shoulder strap first unclip the bottom of the strap from the ring. 2.9 Unclip the top of each side of the shoulder strap by sliding and then pulling the plastic clips. The strap can then be passed through the handle loop. UK - FR - DE - GR - IT - ES - POR - PL - FL - RUS Reclining the Zest 3.1 Your Zest pushchair has a multi- position recline. 3.2 First, locate the backrest adjustment mechanism at the rear of the seat. Pull the recline paddle and gently lower to the desired angle. 3.3 To raise the backrest locate the recline strap and pull gently. The backrest will rise to the desired height. NOTE: It is recommended that the backrest is in the upright position before folding the pushchair. Using the harness 4.1 WARNING: Always use the crotch strap in combination with the waist belt. To fasten the harness insert both buckle clips into each side of the buckle. Listen for the ‘click’. 4.2 WARNING: Always use the harness provided To release the harness press the centre and pull apart. The shoulder straps can be unhooked from the buckle if required. 4.3 Your harness is fully adjustable by moving the slides (A), to make fitting easy. ‘D’ rings are provided for fitting a separate harness if required (B), complying with BS 6684. Your child should always be harnessed in and should never be left unattended, even for short periods of time. Using the brakes 5.1 Your Zest pushchair has a parking device/brake. To apply the brake simply press on either brake catch located on each rear wheel. The brake will automatically locate on both wheels simultaneously. 5.2 To release the parking device/brake simply lift either brake catch and both catches will release simultaneously. 5.3 Your Zest pushchair has swivel wheels. To lock your swivel wheels locate the catch between the front wheels. Slide the catch upwards to lock. Repeat on both front wheels. To use the wheels in swivel mode slide the locking catch downwards and the wheels should swivel freely. Repeat on both wheels. Folding the Zest NOTE: The backrest should always be in the upright position and the hood folded away prior to folding. 6.1 To commence the folding locate the rear locking catch (positioned between the rear wheels) and lift upwards with the toe of your shoe (a), or alternatively, pull the carry strap upwards (b). 6.2 Now locate the secondary safety catch located above the right hand rear wheel. Gently press down until the lock has released. 6.3 Push the handles over and the pushchair will naturally close in three dimensions to a compact size. Ensure the locking catch (located on the right side of the pushchair) has been engaged. Attaching the raincover The raincover simply drapes over your pushchair with the hood extended. Fasten the velcro straps around the front legs and down the back of the hood to secure. UK - FR - DE - GR - IT - ES - POR - PL - FL - RUS Safety Notes Your Zest pushchair is a high quality Silver Cross product. It complies with EN1888:2003 and BS7409 and with correct use and maintenance should give good service. If, however, you should have any problems with your pushchair, please contact your Silver Cross retailer who will take appropriate action. •� Do�not�leave�your�child�unattended�in� this pushchair •� Do�not�carry�more�than�one�child�in� this pushchair •� Do�not�stand�a�second�child�on�rear�lock�or a buggy board •� Do�not�allow�your�child�to�climb�in�or�out of the pushchair of their own accord, as this could result in injury to your child or damage to your pushchair The child should always wear a safety harness complying with BS6684. “D” rings are provided for the attachment of an additional harness. These are located on the existing harness close to where it is attached to the seat frame. Do not hang shopping bags or other objects from the handle. This may cause the pushchair to tip up. Extra shopping or luggage should only be carried in the basket and should not exceed 5kg in weight, evenly distributed. Always hold the seat when making adjustments. Be sure that the parking device is on. Never try to fold the pushchair when the child is seated as this may trap the child. Always use the brake pedal to apply the brake, never the connecting bar as this will result in bending the bar or damage to your pushchair. If you have any difficulty in folding or unfolding the pushchair do not force. This will cause damage. Read the “ To fold or unfold” instructions carefully. It may be unsafe to fit accessories or spare parts other than those supplied or recommended by Silver Cross. If anyone other than the owner is going to use the pushchair (e.g. grandparent, child minder), please show them how to use it correctly. CAUTION: The child should be clear of moving parts while making adjustments. Never leave your child in the pushchair with the raincover fully fitted other than in normal outside use. WARNING: Any load attached to the handle affects the stability of the pram\ pushchair. •� Ensure�all�locking�devices�are�engaged before use WARNING: This product is not suitable for running or skating •� Accessories�that�are�not�approved�by�Silver Cross should not be used •� A�child’s�safety�is�your�responsibility Care and Maintenance Always check your pushchair for signs of wear. Lubricate moving parts regularly, especially the wheels, axles, suspension springs and lower parts of the chassis that tend to collect dirt. Check for freedom of movement of all locking devices. Polish metalwork with a clean, dry cloth. Fabric items and seat unit; To clean, sponge area with warm, soapy water. Rinse well with clean water to avoid staining. Allow to dry naturally, away from direct heat and strong sunlight. A certain degree of fading may occur over time through everyday use. Never machine wash, tumble dry, iron or bleach. Guarantee All Silver Cross products are guaranteed for a period of 12 months against faulty workmanship, when the product is used correctly according to the instruction manual. Please read these instructions carefully before using your new Zest pushchair and keep for future reference. www.silvercross.co.uk

IMPORTANT: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Zest 2 3 silvercrossbaby.com UK - TR UK - TR These instructions are important. Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. Your Zest pushchair is a high quality Silver Cross product. It meets current safety standards and care and regular light maintenance will ensure long service. This vehicle is intended for children from birth to 25kg. If somebody unfamiliar is using your Zest pushchair always ensure that they read these instructions carefully so that they understand how the product works best. Always read all the instructions provided carefully and remember, the safety of your child is your responsibility. WARNING: Never leave your child unattended. Contents Your Zest pushchair includes the following components, please check that you have all the items before proceeding: 1.1 Zest Pushchair Chassis, Seat Fabrics and Basket 1.2 Zest Hood 1.3 Zest Raincover 1.4 Zest Front Wheel Assembly x2 Assembling the Zest WARNING: Check the wheel is secure by pulling gently downwards. Repeat on both sides. Your Zest is now ready to be unfolded. 2.1 Locate the locking catch on the side of the pushchair and lift to release from the locking stud. 2.2 Allow the pushchair to open by lifting the handles upwards and the wheels will naturally fall to the floor. 1.1 1.2 1.3 1.4 2.1 2.2 4 5 silvercrossbaby.com UK - TR UK - TR Assembling the Zest (continued) 2.3 Finally, press down gently upon the rear locking catch, positioned between the rear wheels, to lock your pushchair. WARNING: Failure to do this will cause damage to your pushchair. Place the pushchair on a flat surface and ensure that the pushchair moves freely. 2.4 To fit your Zest hood, locate the clips on the hood. Now attach the hood to the Zest chassis by sliding clips over the hood connection bracket. A positive engagement should be ensured. 2.5 Connect the fabric of the hood to the fabric of the seat with two press studs, one on each side of the pushchair. 2.6 Connect the fabric of the hood to the rear leg of the chassis with two press studs, one on each side of the pushchair. Assembling the Zest (continued) 2.7 Your Zest hood can be opened and folded by pulling the hood forward or pushing backwards on the hood frame. Your hood can also be extended forwards by unzipping zip as shown in diagram 2.7. Please note when folding your Zest pushchair you should always ensure the hood is folded away. Failure to do this could result in damage to your Zest pushchair. 2.8 Your Zest pushchair has a multi- position calf support. Locate the adjustment levers either side of the calf support. Pull levers towards you and adjust to the required position. 2.3 2.4 2.5 2.8 2.7 2.6

Z E S T IMPORTANT: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE 2 These instructions are important. Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. Your Zest pushchair is a high quality Silver Cross product. It meets current safety standards and care and regular light maintenance will ensure long service. This vehicle is intended for children from birth to 25kg. If somebody unfamiliar is using your Zest pushchair always ensure that they read these instructions carefully so that they understand how the product works best. Always read all the instructions provided carefully and remember, the safety of your child is your responsibility. WARNING: Never leave your child unattended. Contents Your Zest pushchair includes the following components, please check that you have all the items before proceeding: 1.1 Zest Pushchair Chassis, Seat Fabrics and Basket 1.2 Zest Hood 1.3 Zest Raincover 1.4 Zest Front Wheel Assembly x2 1.1 1.2 1.3 1.4 3 silvercrossbaby.com Assembling the Zest WARNING: Check the wheel is secure by pulling gently downwards. Repeat on both sides. Your Zest is now ready to be unfolded. 2.1 Locate the locking catch on the side of the pushchair and lift to release from the locking stud. 2.2 Allow the pushchair to open by lifting the handles upwards and the wheels will naturally fall to the floor. 2.1 2.2 4 Assembling the Zest (continued) 2.3 Finally, press down gently upon the rear locking catch, positioned between the rear wheels, to lock your pushchair. WARNING: Failure to do this will cause damage to your pushchair. Place the pushchair on a flat surface and ensure that the pushchair moves freely. 2.4 To fit your Zest hood, locate the clips on the hood. Now attach the hood to the Zest chassis by sliding clips over the hood connection bracket. A positive engagement should be ensured. 2.5 Connect the fabric of the hood to the fabric of the seat with two press studs, one on each side of the pushchair. 2.6 Connect the fabric of the hood to the rear leg of the chassis with two press studs, one on each side of the pushchair. 2.3 2.4 2.5 2.6