SilverFox 2249 Manuals

2249-Electric Beauty Bed User Manual Welcome to use our 2249 Beauty bed, Before use the bed, please read the user manual carefully, thanks. A0 2249 1.About This Manual 2.Warning 3. Precautions This manual shall only be used for the reference of operation of this particular model. If the manual is used for other purposes, SilverFox will not undertake any according consequences and responsibility. All information of this manual shall be protected by copyright and shall not be copied, copied and translated in any part of this specification without the written consent of our company SILVERFOX. Power supply must be cut off when changing electrical components or maintaining and cleaning machines. The plug must be plugged into an outlet that is properly installed and grounded, to prevent the risk of fire and electric shock. Do not stand on this equipment. Do not allow children to play with and place the equipment in a place where children can avoid touching; Please adjust the backrest back to the highest position when you leave. Please do not place the equipment in damp places such as bathroom to avoid electric shock or other failure; The remote control should also avoid contact with water. Please do not place the equipment in places where painting/coating or oxygen providing during operation. Unless being monitored or instructed by personnel who can be responsible for their personal safety, the people who have physical obstacles, tactile disorders, mental disorders, lacking of experience, common sense or children, are not allow to use the equipment. Please contact distributor, service center or related personal with appropriate skill and experience for repairing if the plug is damaged, in case of any dangerous. Please make sure there is no accessible thing within the stroke during any operation of the beds. Maintenance should be processed by trained professionals. Read this manual carefully before installation, operation and adjustment. And please keep it well. This Electric beauty bed is equipped with a three-wire power cord. The power cord must be plugged into an three-hole outlet which is properly installed and grounded. This is not only to prevent the risk of electric shock, but also ensure bed work properly. When adjusting the backrest, seat cushion, footrest or lifting of the whole bed by manual controller or foot control switch, please keep your hands, feet and head away from the position1.2.3.4.5.6 showed on below photo to avoid getting jammed. While controlling the lifting of the whole bed, the button must be pressed continuously until the bed be in a suitable position. Please pay attention that the input frequency should be Ms × 6min/h when operating the motor. Maintenance should be processed by trained professionals. After each treatment, please use neutral reagent to clear the dust, stains on leather or on plastic cover. 2249 4.Structure of electric beauty bed 1.Angel adjustment of the backrest 3.Lifting adjustment of the whole bed 2.Lifting adjustment of the armrest 4.Angel adjustment of the footrest This beauty bed consists of controller box, motor, hardware, plastic parts and leather. Among them, the controller box is controlling the operation of four motors and the hand controller. This beauty bed includes angel adjustment of the backrest, lifting adjustment of the armrest, lifting adjustment of the whole bed and angel adjustment of the footrest, which is an overall and integral structure. (Details as shown below) 1 2 3 4 5 6 1 2 3 4 5.Serviceable range This electric beauty bed is suitable for beauty and massage treatment. 6.Installation 1. Put the bed to a proper location, according to the overall layout, the daylighting or artificial lightings and operation condition of the salon's or the home. And keep it in the clean, dry and cool operating environment. 2. Open the Packing Carton to Check Open the packing carton, check if the bed is intact and whether the accessories or spares are complete. Please contact distributor or us if there’s any problem. 3. Installation Place the bed to the proper position. Please note that it is unnecessary to install extra screw on the floor to fasten the bed, because the original design has take the stability performance into consideration. But please ensure the bed is placed on a firm and flat ground, so as to prevent any accident. If the bed rotates or slant due to rough ground, you could adjust the four pieces of plastic feet (M10×30) and nuts (M10) by hexagon open-end wrench, which are fasten on the bottom panel, so as to ensure the bed is stable. 4. Power Input: Voltage and frequency input shall be AC 100-130, 50/60Hz or 220-240V, 50/60Hz. Plug the bed on the power supply properly. (Details as shown below) 2249 Air�Switch Connection Box