SLIK SPRINT PRO II Manuals

K114 SPRINT PRO II I SPRINT MINI II Tripod Operating Instructions Thank you very much for choosing SLiK SPRINT PRO II Tripod. The SLiK Corporation has designed your tripod to be a sturdy, rugged and dependable product that will provide you with many years of satisfactory use. Please take a few moments to read these operating instructions carefully before use so that you can take full advantage of your Tripod's many fine features. Retain this operating instruction sheet in case you might want to refer back to it. LtCaution This caution icon refers to information pertaining to important safety procedures in preventing injuries, or damages which may occur as a result of mishandling this product. Prohibition This prohibited icon refers to information pertaining to prohibited con- tents. Please refer to instructions closely to avoid accidents. Specification SPRINT PRO II Folded length Max. operating height Max. center column ext. Weight SPRINT MINI II Folded length Max. operating height Max. center column ext. Weight 470mm 1,615mm 300mm 940g 350mm 1,090mm 210mm 780g LtCaution Soft Grip is consumption and cannot be used permanently. Please replace it whenever it is ragged. Setting up LtCaution To prevent accidental equipment fall or tripod tipping over making sure all levers, knobs and handles on the tripod are securely tightened. And all three legs are opened all the way. This product has been designed to handle equipment weighing under 2 kgs (4 Ibs 6 oz). Do not overload. Some equipments weighing under 2 kgs (4 Ibs 6 oz), such as long lenses, may not balance well due to its weight distribution. In such case use a larger tripod. EqUipment that can be loaded on this Tripod SPRINT MINI II Carrying a tripod with a camera left on can result in unexpected accidents. We therefore, recommend you to remove your camera while you are carrying the tripod. Carrying the Tripod Prohibition Soft grip 2-Way leg tip Tilt lock knob Quick release lock lever Leg lock lever Upper part of Center column Quick release plate Camera platform Center column stopper 3-Position leg angle Adjustment lock Lower part of Center column Center column base stopper Components Center column locking nut SPRINT PRO II (The example of vertical position photography) Using the Pan Head While you are holding the camera, loosen the Tilt lock knob. You can move Camera Platform and Base Plate freely. Note: For vertical photos the Camera platform can be tilted 90 degrees in either direction. To attach the plate, slide into Quick release plate slantways. It will be closed automatically after attaching. Fasten the plate Locking Lever tightly. It must be certainly locked. Insert the Camera mounting screw on the Quick release plate in the place of the tripod attachment screw of your camera. Turn the Camera mounting screw knob and fix firmly. Attaching the camera to the Quick release platfonn LtCaution~ To remove the Quick release plate, turn the Quick release plate locking lever. In this case do not put the lock lever back by force as it has been stood by the stopper.