Sloan OPTIMA plus ERF-885 Manuals

ERF-885 I.I. — Rev. 0 (09/05) Code No. 0816493 INSTALLATION INSTRUCTIONS BATTERY POWERED SENSOR ACTIVATED WIRELESS LAVATORY FAUCET LIMITED WARRANTY Sloan Valve Company warrants its ERF-885 Faucet to be made of first class materials, free from defects of material or workmanship under normal use and to perform the service for which it is intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of three years (1 year for special finishes) from date of purchase. During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer's cost, and this shall be the sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company's products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the batteries. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVEENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER. Installation of the Sloan OPTIMA Plus® ERF-885 Battery Powered, Sensor Activated Wireless Lavatory Faucet makes wash-up totally "hands-free," providing the ultimate in sanitary protection and automatic operation. The OPTIMA Plus® Faucet uses Active and Passive Infrared sensing technology to sense the user's presence and turn on a water supply that has been pre-mixed to the desired water temperature. When the user’s presence is no longer sensed, the water flow automatically stops. The ERF-885 Faucet is powered by four C-size batteries which eliminates the need to run any electrical lines to the system. In addition, the Faucet uses an RF signal between the sensor and valve module which eliminates the need to connect any electrical or optical line between the two components. These features provide easier installation in less time! The Sloan ERF-885 Battery Powered, Sensor Activated Wireless Lavatory Faucet comes complete with an integral faucet and sensor assembly, trim plate, control module, four Duracell alkaline batteries — Size C (for control module), two DL123A lithium batteries (for spout), Bak-Chek® compression tee and all mounting hardware. Available with 4 inch or 8 inch trim plate. Also available as optional equipment is a grid strainer and mixing valves. 3/8 inch copper supply tube or flexible hose connections to be supplied by the installer. The following instructions will serve as a guide when installing the Sloan ERF-885 Faucet. As always, good safety practices and care are recommended when installing your new Faucet. If further assistance is required, contact your nearest Sloan Representative office or the Sloan Installation Engineering Department at 1-888-SLOAN-14 (1-888-756-2614). ERF-885 Battery Powered, Sensor Activated Lavatory Faucet Made in the U.S.A. Compliant to: ANSI/ASME A112.18.1M CSA B125 WIRELESS