Smartnet Gprinter PT-380 Manuals

Safety warning Safety notice Only the supplied AC power adapter and lithium battery is allowed to use, otherwise it may cause device damage, battery leakage, fire, and even explosion. Do not put the battery into a fire or apply direct heat to it or disassemble it, otherwise cause the battery leakage, fire, and even explosion. Please remove the battery from the printer and store separately if the printer will not be used for a long period of time, otherwise cause the battery leakage. As the battery’s liquid is corrosive, if there any case of operational mistakes to cause leakage, please wash immediately with plenty of clean water if skin or clothes contact it carelessly. If entering eyes, wash with plenty of clean water at once and seek medical advice. Do not touch the paper tear-off knife. The print head is a heated part, please do not touch the print head and other parts around it during or after the printing process. Do not touch the print head and plug-in parts to avoid print head damage. Do not open the top cover when printing, otherwise may cause printer work failure. In order to get good print quality, and extend the device service life, we suggest that using the recommended thermal paper roll or which is the same quality of. Do not print when it’s out of paper, which will seriously damage the print head and rubber roller. Make sure printer power is turned off when connecting and disconnecting the power cable or data cable. Do not let water or conducting material (eg. Metal) into the printer, please turn off the power immediately if happened. Please make sure to charge the battery for 60% or above and then remove the battery from the printer and store separately if the printer will not be used for a long period of time. Please keep this manual for your reference. Two kinds of Interface optional: USB+Bluetooth (standard ), USB+WiFi (optional) USB+Bluetooth: BT3.0 and BLE4.0, support Android and iOS system. USB+WIFI: AP/STA/AP+STA mode to set up the networks. Support USB virtual COM port for developing and testing by developer. Compatible with ESC/POS printing commands, support NV logo download printing, various 1D bar code and QR code. Low power consumption, good print quality, 50km mechanism lifespan. Support GB18030 Simplified Chinese, Big5 traditional Chinese, Korean, international character set and extended code pages. LED can be showed abnormal condition of the printer, battery capacity status, charging and connection status ect. Freely offer DLL, SDK, Demo for developing. Main Features: After unpacking the unit, please check that all the necessary accessories are included in the package. Unpacking 1pcs 1pcs 1pcs 1pcs 1pcs User’s manual Printer Lithium battery USB cable Power adapter Technique Spec Printing Barcode & Character Buffer Physical Properties Power Environment Reliability Print method Print width Paper diameter Paper thickness Paper width Print speed Paper cutting way Dot density Interface Print commands Fonts Character size Fonts Barcode Code page Data NV Flash Dimension Weight Power adapter Lithium battery Charge period Work Environment Storage Environment Mechanism Direct thermal line 80mm 50±0.5mm 0.06~0.08mm 72mm (Max) 60mm/s (max) Tear-off 576dot/line USB+Bluetooth3.0/BLE4.0 (Standard) USB+WiFi (Optional) Compatible with ESC/POS ANK Font: Font A: 12*24dots Font B: 9*17dots Simplified/Traditional Chinese Character, Korean: 24*24dots GB18030, Big5, Korean UPC-A/UPC-E/EAN(JAN)13/ EAN(JAN)8/CODE39/CODABAR/ ITF/CODE93/CODE128/QR code PC437/Katakana/PC850/PC860/PC863/ PC865/West Europe/Greek/Hebrew/East Europe/Iran/WPC1252/PC866/PC852/ PC858/IranII/Latvian/Arabic/PT151, 1251/PC747/WPC1257/Vietnam/PC864/ PC1001/Uygur/Thai 4K bytes 60K bytes 131mm*107mm*58mm 430g (including battery) Input: AC220V output: DC 9V/1A 2200mAh/7.4V 3h-5h Temperature: 0～45℃, Humidity: 10～90% Temperature: 0～50℃, Humidity: 10～90% 50km Zhuhai Smarnet Equipment Co.,Ltd PT-380