SNOWJOE sunjoe 24V-DD-CT Manuals

A Division of Snow Joe®, LLC Model 24V-DD-CT Form No. SJ-24V-DD-CT-880E-M R OPERATOR’S MANUAL © 2019 by Snow Joe®, LLC All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS 1 CORDLESS DRILL/DRIVER – CORE TOOL 24-VOLT MAX* | 2-SPEED IMPORTANT! Safety Instructions All Operators Must Read These Instructions Before Use Always follow these safety guidelines. Failure to do so may result in serious bodily injury or death. General Safety mWARNING! When using the drill/driver basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. These include: Work Area Safety 1. Keep work area clean and well-lit – Cluttered, dark areas invite accidents. 2. Keep children, bystanders, and pets away – All spectators, including pets, should be kept a safe distance away from the work area. 3. Do not operate power tools in explosive atmospheres – Such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. Personal Safety 1. Stay alert – Watch what you are doing. Use common sense. Do not operate the drill/driver when you are tired, or under the influence of alcohol or drugs. 2. Dress properly – Do not wear loose clothing or jewelry. They can get caught in moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoid unintentional starting – Do not carry the drill/driver with your finger on the trigger. Make sure the switch is off before connecting the drill/driver to power source. 4. Do not overreach – Keep proper footing and balance at all times. Proper footing and balance enable better control of the cordless drill/driver in unexpected situations. 5. Use personal protective equipment – Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. 6. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. – Use of dust collection can reduce dust-related hazards. 7. Do not use on a ladder or unstable support – Stable footing on a solid surface enables better control of the power tool in unexpected situations. Tool Use and Care 1. Do not force the tool – It will perform better with less likelihood of personal or mechanical injury if it is used at the rate for which it was designed. 2. Do not use drill/driver if switch does not turn on or off – The drill/driver that cannot be controlled with the switch is dangerous and must be repaired. 3. Disconnect the plug from the power source and/or battery pack from the drill/driver before making any adjustments, changing accessories, or storing the drill/driver – Such preventive safety measures reduce risk of starting the power tool accidentally. 4. Store idle drill/driver out of reach of children or other untrained persons – Drill/driver is dangerous in the hands of untrained users. 5. Maintain cordless drill/driver – Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the drill/driver's operation. If damaged, have the drill/driver serviced before using. Many accidents are caused by poorly maintained tools. 6. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed – Use of the power tool for operations different from those intended could result in a hazardous situation. Battery Tool Use and Care 1. Recharge only with the charger specified by the manufacturer – A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 2. Charge internal battery at ambient temperatures between 50ºF – 104ºF (10ºC – 40ºF). 3. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help – Liquid ejected from the battery may cause irritation or burns. 4. Use power tools only with specifically designated battery packs – Use of any other battery packs may create a risk of injury and fire.

© 2020 by Snow Joe®, LLC All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS 1 EN A Division of Snow Joe®, LLC Model 24V-DD-CT Form No. SJ-24V-DD-CT-880E-MR1 R OPERATOR’S MANUAL CORDLESS DRILL/DRIVER – TOOL ONLY 24-VOLT MAX* | 2-SPEED IMPORTANT! Safety Instructions All Operators Must Read These Instructions Before Use Always follow these safety guidelines. Failure to do so may result in serious bodily injury or death. General Safety mWARNING! When using the drill/driver basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. These include: Work Area Safety 1. Keep work area clean and well-lit – Cluttered, dark areas invite accidents. 2. Keep children, bystanders, and pets away – All spectators, including pets, should be kept a safe distance away from the work area. 3. Do not operate power tools in explosive atmospheres – Such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. Electrical Safety 1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators – There is an increased risk of electric shock if your body is earthed or grounded. 3. Do not expose power tools to rain or wet conditions – Water entering a power tool will increase the risk of electric shock. 4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 5. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 6. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. Personal Safety 1. Stay alert – Watch what you are doing. Use common sense. Do not operate the drill/driver when you are tired, or under the influence of alcohol or drugs. 2. Dress properly – Do not wear loose clothing or jewelry. They can get caught in moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoid unintentional starting – Do not carry the drill/driver with your finger on the trigger. Make sure the switch is off before connecting the drill/driver to power source. 4. Do not overreach – Keep proper footing and balance at all times. Proper footing and balance enable better control of the cordless drill/driver in unexpected situations. 5. Use personal protective equipment – Always wear eye protection. Protective equipment such as dust mask, non- skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. 6. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. – Use of dust collection can reduce dust-related hazards. 7. Do not use on a ladder or unstable support – Stable footing on a solid surface enables better control of the power tool in unexpected situations. Tool Use and Care 1. Do not force the tool – It will perform better with less likelihood of personal or mechanical injury if it is used at the rate for which it was designed. 2.� Do�not�use�drill/driver�if�switch�does�not�turn�on�or�off� – The drill/driver that cannot be controlled with the switch is dangerous and must be repaired. 3. Disconnect the plug from the power source and/or battery pack from the drill/driver before making any adjustments, changing accessories, or storing the drill/driver – Such preventive safety measures reduce risk of starting the power tool accidentally. 4. Store idle drill/driver out of reach of children or other untrained persons – Drill/driver is dangerous in the hands of untrained users. 5. Maintain cordless drill/driver – Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the drill/driver's operation. If damaged, have the drill/driver serviced before using. Many accidents are caused by poorly maintained tools.