SoftBank 920SC Manuals

First Step Guide Support Safety Precautions Before Using Handset Customer Service SoftBank Customer Centers From a SoftBank handset, dial toll free at 157 (General Information) 113 (Customer Assistance) SoftBank Global Call Center From outside Japan, dial +81-3-5351-3491 (International charges apply.) Call this number immediately if handset/USIM Card is lost or stolen while outside Japan. ■Call these numbers toll free from landlines. Subscription Areas Contact Hokkaido, Aomori, Akita, Iwate, Yamagata, Miyagi, Fukushima, Niigata, Tokyo, Kanagawa, Chiba, Saitama, Ibaraki, Tochigi, Gunma, Yamanashi, Nagano, Toyama, Ishikawa, Fukui General Information 0088-240-157 Customer Assistance 0088-240-113 Aichi, Gifu, Mie, Shizuoka General Information 0088-241-157 Customer Assistance 0088-241-113 Osaka, Hyogo, Kyoto, Nara, Shiga, Wakayama General Information 0088-242-157 Customer Assistance 0088-242-113 Hiroshima, Okayama, Yamaguchi, Tottori, Shimane, Tokushima, Kagawa, Ehime, Kochi, Fukuoka, Saga, Nagasaki, Oita, Kumamoto, Miyazaki, Kagoshima, Okinawa General Information 0088-250-157 Customer Assistance 0088-250-113 Handset User Support Via Yahoo! Keitai Main Menu: From above the search fi eld, select ﾒﾆｭｰﾘｽﾄ a English a User Support. Emergency Numbers Online English Manual See SOFTBANK MOBILE Corp. Website (http://www.softbank.jp). May be unavailable at purchase. Call Customer Service or try later. • Police ..................................110 • Fire & Ambulance ..............119 • Maritime Safety Agency... .118 ■Do not short-circuit Charger Port. Keep metal objects away from the Charger Port. Keep handset away from jewelry. Battery may leak, overheat, burst, or ignite causing injury. Use a case to carry handset. ■Avoid battery leakage, breakage or fi re injury. Do not: • Heat or dispose of battery in a fi re. • Disassemble, modify, or break battery. • Damage or solder on to battery. • Use a damaged or deformed battery. • Use a non-specifi ed charger. • Force battery into handset. • Charge or place battery near fi re, heat sources or expose it to extreme heat. • Use battery for other equipments. ■Do not insert foreign objects into handset. Do not place metal or fl ammable objects in handset or Charger. This may cause fi re or electric shock. Keep handset out of the reach of children. ■Keep handset away from liquid-fi lled containers. Keep handset and Charger away from chemicals/ liquids. Fire or electric shock may result. ■Avoid sources of fi re. To prevent fi re or explosion, do not use handset near gas or fi ne particles (Coal, dust, metal, etc.). ■Keep handset/Charger out of microwave ovens. Battery or handset may leak, burst, overheat, or ignite. ■Do not use Mobile Light near people's faces. Eyesight may be temporarily affected leading to accidents. Use of controls, adjustments, or performance of procedure other than those specifi ed herein may result in hazardous radiation exposure. As the emission Record from Mobile Light LED used in this product is harmful to the eyes, do not attempt to disassemble the cabinet. Servicing is limited to qualifi ed servicing station only. Contact SoftBank Customer Center, Customer Assistance for repairs. ■Do not subject handset to shocks. Subjecting handset or Charger to shocks may cause malfunction or injury. Should handset break, remove battery and contact the SoftBank Customer Center, Customer Assistance. Discontinue handset use. Fire or electric shock may occur. ■Keep handset off and Charger disconnected near fi lling station or places with risk of fi re/ explosion. Handset use near petrochemicals or other fl ammables may lead to fi re or explosion. ■Preventing accidents • For safety, never use handset while driving. Pull over beforehand. Mobile phone use while driving is prohibited by the revised Road Traffi c Law (Effective November 1 2004). • Do not use headphones while driving or riding a bicycle. Accidents may result. • Do not turn the volume up so high that ambient sounds cannot be heard, especially when walking in or around traffi c to avoid accidents. ■Do not swing handset by the strap. Injury or breakage may result. ■Use only the specifi ed voltage. Non-specifi ed voltages may cause fi re or electric shock. • AC Charger: AC 100V-240V Input SoftBank is not liable for problems caused by charging handset abroad. • In-Car Charger: DC 12V/24V Input ■Do not use step up/down transformers. Use of the AC Charger with step up/down transformers may cause fi re, electric shock or damage. ■Do not use In-Car Charger inside vehicles with a positive earth. Fire may result. Use In-Car Charger only inside vehicles with a negative earth. ■Do not plug multiple cords in one outlet. Excess heat or fi re may occur. ■Do not bend, twist, pull, or set objects on the cord. Do not put heavy objects on the cords or heat or pull the cords. Fire or electric shock may result. ■Do not short-circuit Charger Port. Keep the metal away from Port. Overheating, fi re, or electric shock may result. For more information, see User Guide P.xxxi Accessories •Battery [SCBAJ1] •Utility Software 1 (CD-ROM) •Stereo Earphone Microphone [SCLAJ1] •USB Cable [SCDAJ1] •SBM Charger Connector Adapter (SC-A) [SCDAJ2] 2 1 Utility Software updates/upgrades may become available via SOFTBANK MOBILE Corp. Website (http://www.softbank.jp) without prior notifi cation. 2 Required to connect specifi ed AC Charger (purchased separately) and 920SC, to power handset or charge battery. Two Connector Adapters are included. Manner Profi le • Minding Mobile Manners Please use handset responsibly. Inappropriate handset use can be both dangerous and bothersome to others. Please take care not to disturb others with handset use. Adjust handset use to your surroundings accordingly. Activating/Canceling Manner Profi le ■Press # for 1+ seconds USIM Card Installation 1 IC 2 With IC chip down, insert USIM Card Push in USIM Card until it locks USIM Card must be inserted to use 920SC. Turn 920SC off and remove battery before inserting/removing USIM Card. Battery Installation 1 2 3 Notches 4 Battery Cover Tabs Slide Battery Cover Remove Battery Cover Align Battery Slots and 920SC Notches to insert battery Align Battery Cover Tabs and 920SC Slots; close Battery Cover • PIN 4- to 8-digit security code; prevents unauthorized use. Set PIN certifi cation to On to require PIN entry at power on. • PIN2 4- to 8-digit security code required for Reset Call Cost or Edit Cost Limit, etc. Change PIN and PIN2 as required. • Canceling PIN Lock (PUK/PUK2 Code★) Incorrectly entering PIN or PIN2 three consecutive times activates PIN Lock and limits 920SC function access. Enter PUK (PIN Unlocking Key) Code to cancel PIN Lock. For more information, contact Customer Service. ★ Entering PUK/PUK2 incorrectly ten consecutive times locks USIM Card and disables 920SC. Write down PUK and PUK2. Unlocking USIM Card requires special service. Contact Customer Service. USIM PINs • Phone Password 4-digit number (9999 by default) required to use or change handset functions. Entered digits appear as . If incorrect, error message appears; try again. • Center Access Code 4-digit number specifi ed at subscription; use to subscribe to fee-based information/access Voice Mail via landlines. • Network Password 4-digit number specifi ed at subscription; use for Call Baring, etc. Entering it incorrectly three consecutive times locks Call Barring settings. To resolve, Network Password and Center Access Code must be changed. For details, contact Customer Service. Change Phone Password or Network Password on 920SC. Security Codes Weight Approximately 129 g Continuous Talk Time Voice Call: 200 minutes (in Japan, W-CDMA)/ 350 minutes (GSM) Video Call: 110 minutes (in Japan, W-CDMA) Continuous Standby Time (920SC closed) 340 hours (in Japan, W-CDMA, GSM) Charging Time (power off) AC Charger: Approximately 170 minutes Dimensions (W x H x D) Approximately 52 x 101.5 x 18.9 mm (920SC closed) Maximum Output 0.25 W • Values calculated with battery installed. • Actual times may be reduced by alternating between operations/transmissions and Standby. Specifi cations 1 Port Cover AC 100V outlet Charger Charger Connector Connector Adapter 2 3 4 1 Insert Charger Connector into Adapter 2 Open Port Cover and insert Adapter Connector 3 Plug Charger into an AC 100V outlet • While charging, battery indicators change as follows: → → . fl ashes when battery is full. • Charging time is approximately 170 minutes. 4 Unplug Charger, then disconnect handset Charging SoftBank 920SC First Step Guide Emergency Numbers Customer Service More Information English Interface International Call Customizing Address And More... More Information GH68-16717A (Rev. 1.0)

Introduction Thank you for purchasing SoftBank 920SC. ●Read this guide thoroughly before using 920SC to ensure proper usage. ●After reading this guide, keep it on hand for later reference. ●Should you lose or damage this guide, contact Customer Service (fP.13-29). ●Accessible services may be limited by contract conditions or service area. SoftBank 920SC is compatible with both 3G and GSM network technologies. Notes • Unauthorized copying of any part of this guide is prohibited. • Contents are subject to change without prior notice. • Some functions and services are not available in Japan. • Steps have been taken to ensure the accuracy of descriptions in this guide. If you find inaccurate or missing information, contact Customer Service (fP.13-29). • SoftBank will replace missing/misplaced pages upon request.

Introduction Thank you for purchasing the SoftBank 920SC. ●Read this guide thoroughly before using 920SC to ensure proper usage. ●After reading this guide, keep it for later reference. ●Should you lose or damage this guide, contact Customer Service ( P.26-24). ●Accessible services may be limited by contract conditions or service area. 920SC is compatible with 3G network technology. Note ･Unauthorized copying of any part of this guide is prohibited. ･Contents are subject to change without prior notice. ･Not all functions and services described in this user guide are available in Japan. ･Steps have been taken to ensure the accuracy of descriptions in this guide. If you find inaccurate or missing information, contact Customer Service ( P.26-24). ･If there are any missing/misplaced pages in this manual, SoftBank will replace it.