SOMFY inteo Manuals

L = Mains phase N = Mains neutral C = common ▲ = UP ▼ = DOWN KEY SWITCH Blue Brown ▼▲ 2 x 1,5 mm2 Neutral Phase MAINS 230V - 50Hz Dry contacts TRANSMITTER N C L ▼ ▲ 2 1 3 4 The DRY CONTACT TRANSMITTER is a RTS control that can be controlled driven by a key swit- ch, a paddle switch, a Centralis IB or a dry contacts rain sensor. The UP or DOWN radio commands are achieved when the UP or DOWN inputs (▲ ▼) are connec- ted with the common input (C). The STOP command is achieved when the three inputs (▲ ▼ C) are conected together. Hereby, SOMFY, declares that this equipment is in compliance with the essential requirements and other rele- vant provisions of Directive 1999/5/EC. A Declaration of Conformity is available at the web address www.somfy.com Heading CE L = Mains phase N = Mains neutral C = common ▲ = UP ▼ = DOWN CENTRALIS IB + C Set the switch on the "-" position ▼▲ +- 2 x 1,5 mm2 Neutral Phase MAINS 230V - 50Hz Dry contacts TRANSMITTER - N C L Blue Brown 45 mm usable in EU, CH • Supply : 220-240V 2,5A 50/60Hz • Fuse : 3,15A • Transmission timing : min0,5 sec. max10 sec. • Frequency : 433.42 MHz • Protection index : IP30 • Temperature : +5°C to +40°C • Class II product 80 mm 80 mm R PROG ▲,S,▼,S LED Programing button Built-in manual security control C 5 4 3 2 1 SUPPLY 230V 50Hz Phase Neutral Earth C 5 4 3 2 1 SUPPLY 230V 50Hz Phase Neutral Earth This device must be installed and programmed by qualified installers for whom this instruction is inten- ded. Before connecting the unit, read the instructions carefully. 1Characteristics 2 Installation INSTALLATIONguide Ref.5006405A inteo DRY CONTACT TRANSMITTER We reserve the right to make changes due to technical improvements. DRY CONTACT TRANSMITTER Cabling of a CENTRALIS IB Cabling of a Key switch notice dry contact 10/03/03 16:23 Page 1