SOMFY Sonesse 28 WireFree RTS Li-ion Manuals

BATTERY POWERED ROLLER MOTOR MANUAL ROLL UP 24, ROLL UP 28, SONESSE 28 AND SONESSE ULTRA 30 Somfy Motor RTS manual 25_02.indd 1 04/03/2020 14:25

Sonesse 28 WireFree RTS Li-ion Sonesse ULTRA 30 WireFree RTS Li-ion EN Instructions ES Instrucciones FR Notice DE Anleitung RU инструкции CS Pokyny HU Útmutató PL Instrukcje RO Instrucțiuni IT Manuale PT Instruções EL Εγχειριδιο ������������� AR

Somfy RTS Motor Programming Instructions Motor Programming Instructions have been rewritten by https://www.AVOutlet.com We rewrite the Somfy instructions in an effort to make things a little easier to follow. There are however some subtle differences in the motors. Please refer to the included Somfy motor specific instructions if something is not working. Feel free to let us know if something is found to be incorrect. Please Read and Follow These Instructions. Please use the motor programming instructions provided here. The remote control instructions can be used for reference but they are not as easy to follow. A copy of the Somfy instructions are also provided for your reference. Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure to do so can result in damage to the motor and or the shade. Be prepared to stop the shade during programming. The programming step where you set the first stop limit (upper or lower whichever you do first) will activate the motor to move without stopping on its own. You will need to stop the motor at the next stop limit using the remote as indicated. Failure to stop the shade can result in shade or motor damage. The motors MUST be installed in the tube and the assembly must be mounted into brackets to be able to program the motor. Only apply power to the motor being programmed regardless if the other motors have been programmed or not. This will prevent inadvertent interaction with other motors. This is not possible for motors with built-in batteries like the R28WF, ST30WF etc. Motors with built-in batteries must be put to sleep. We recommend mapping out the installation before proceeding. This will reduce set-up time and make life easier. Decide the channels and or additional remotes to be assigned to each shade in the installation. Each shade should be completely programmed before moving to the next. Have the necessary remotes and controls ready prior to proceeding. All motors programmed to the same RTS channel will operate at the same time. If you want individual control of the motor, you must use separate channels on multi-channel remotes or separate single channel remotes The remote controls are generally considered to be dummy devices as they do not store any motor or programming information. The motors are the intelligent devices. The motors store the shade operation limits in their memory and the motors also memorize the specific remotes or channels assigned to control them. Each motor can have up to 12 remotes or channels controlling them. Note: The Telis 4 Remote Control is a 5 Channel Remote control. The 5th channel is all lights on. The 5th channel by default is not a group channel. This channel is not automatically assigned and must be programmed.