Sony CAV-CVS12ES - Component Video Switcher Manuals

• Distributes up to 12 zones of high definition video over CAT5e • 8 component video inputs supporting up to 1080p • 4 composite video inputs with up conversion • IR and RS232 control • Designed for and fully integrated with CAV-M1000 • CAT5e to component video balun at TV location F E A T U R E S C AV- C V S 1 2 E S S PE C I F I C AT I O N S H E E T High Definition Component Video Switcher S PE C I F I C AT I O N S POWER REQUIREMENTS • 120VAC, 60 Hz • Power consumption: 33W INPUTS AND OUTPUTS • Video input • Y: 1.0Vp-p/75 ohm • Pb: 0.7Vp-p/75 ohm • Pr: 0.7Vp-p/75 ohm • IR input: accepts 40kHz IR modulation frequency • Video output • CAT5e RJ45 DIMENSIONS • 17 1/4” (w) x 4” (h) x 11 1/2” (d) (including projecting parts) • 2U rack space WEIGHT • 9 lbs. 15 oz. (excluding AC power cord) SUPPLIED ACCESSORIES • Rack ears ©2007 Sony Electronics Inc. All rights reserved. Features and specifications are subject to change without notice. Sony is a trademark of Sony. Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656 For more information: sony.com/newhome

3-198-136-11(1) Component Video Switcher  2007 Sony Corporation CAV-CVS12ES Installation Manual Owner’s Record The model and serial numbers are located on the rear panel. Record the model and serial numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No.

Control4® and Sony® CAV-CVS12ES Component Video Switcher Integration Guide Model Number C4-CVS12ES-B-A Sony® CAV-CVS12ES Component Video Switcher CAUTION! Refer to important safety instructions found in the Sony documentation included with this product and the Control4 documentation included with your Control4 controller (Media Controller, Home Theater Controller, or Home Controller HC-300). General Description A key component to the Control4® vision to automate, control, and provide entertainment throughout the home is the Sony CAV-CVS12ES Component Video Switcher, providing whole house High Definition video distribution. It also provides serial and IR communications and easily integrates with the Control4 system. Integrating the Component Video Switcher with the Control4 system provides seamless video distribution for 12 zones of High Definition video throughout the home via a single Cat5e wire per zone. FIGURE 1. Back View of CAV-CVS12ES This video switcher is part of Sony's high-performance "ES" line of premium AV equipment. Designed to distribute up to twelve video sources throughout the home, the CAV-CVS12ES is a single-box solution that incorporates eight HD component video inputs (up to 1080p) and four composite video inputs with up-conversion for flexible device connectivity. High definition video content is delivered to up to 12 zones through Cat5e wiring, which is fed into a component adapter (Video Balun, C4-CVB1-A) connected to the display. Requirements • Control4 Home Theater Controller, Media Controller, or Home Controller HC-300 fully installed and configured with a Control4 project (for home owner) • Control4 Composer software (Professional Edition for dealer) for initial project set up. • C4-CVB1-A Cat5e to Component Video Balun (sold separately) NOTE: One Video Balun is required for each video zone. What is in the Box Carefully unpack the contents from the box and make sure the following items are included: • Sony CAV-CVS12ES Component Video Switcher and the following acces- sories: • Sony Instruction Manual • Sony Warranty Reference Card • Power Cable If these items are missing or damaged, please contact Sony Corporation immediately. • Other accessories are: • Serial null-modem cable with DB9 female ends (6 foot) • Serial null-modem cable with DB9 and one open end • Control4 and Sony CAV-CVS12ES Component Video Switcher Integration Guide (this document) If these items are missing or damaged, please contact your Control4- authorized reseller immediately. Installation 1 Meet all requirements defined in the "Requirements" section of this document and the Instruction Manual provided by Sony Corporation. 2 Use one of the serial null-modem cables provided to connect the Sony video switcher to the appropriate serial port type (DB9 or Pluggable Terminal Block) on the Control4 controller using the instructions that follow. For HC-300 or Media Controller "Serial 1" and "Serial 2" Ports (Figure 2): Use the provided cable with DB9 female ends to connect the Sony video switcher and the controller. Figure 2 specifies the pins that are used in the cable. For Home Theater Controller or Media Controller "Serial 3" or "Serial 4" Ports (Figure 3): Use the provided cable with the DB9 female end and the stripped open end: From the open end of the cable, insert wires into the appropriate openings of the pluggable terminal block and then snap the terminal block's latch closed. These are the correct connections (see Figure 3): • Insert the black wire from DB9 pin 3 (TX) into the RX terminal block opening. • Insert the white wire from DB9 pin 2 (RX) into the TX terminal block opening. • Insert the red wire from DB9 pin 5 (GND) into the GND terminal block opening. • Connect the remaining end of the DB9 cable to the Sony video switcher. FIGURE 2. Serial Null-modem Cable with D89 Female Ends FIGURE 3. Serial Null-modem Cable with a Stripped End and a DB9 Female End with D89