Sony CDX-F5000 - Fm/am Compact Disc Player Manuals

® LIMITED WARRANTY (U.S. Only) Sony Electronics Inc. (“Sony”) warrants this product against defects in material or workmanship for the time periods and as set forth below. Pursuant to this Limited Warranty, Sony will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product. For purposes of this Limited Warranty, “refurbished” means a product or part that has been returned to its original specifications. In the event of a defect, these are your exclusive remedies. Labor: For a period of one (1) year from the original date of purchase of the product (“Labor Warranty”), Sony will, at its option, repair or replace with new or refurbished product, product determined to be defective. If Sony elects to replace the product after this Labor Warranty has expired but while the Parts Warranty below is still in effect, it will do so for the applicable labor charge. Parts: For a period of one (1) year from the original date of purchase of product (“Parts Warranty”), Sony will supply new or refurbished replacement parts in exchange for parts determined to be defective. This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the Product; any such software is provided “AS IS” unless expressly provided for in any enclosed software Limited Warranty. Please refer to the End User License Agreements included with the Product for your rights and obligations with respect to the software. Instructions: To obtain warranty service, you must deliver the product, freight prepaid, in either its original packaging or packaging affording an equal degree of protection to the Sony authorized service facility specified. It is your responsibility to backup any data, software or other materials you may have stored or pre- served on your unit. It is likely that such data, software, or other materials will be lost or reformatted during service and Sony will not be responsible for any such damage or loss. A dated purchase receipt is required. For specific instructions on how to obtain warranty service for your product, Visit Sony’s Web Site: www.sony.com/service Or call the Sony Customer Information Service Center 1-800-222-SONY(7669) For an accessory or part not available from your authorized dealer, call: 1-800-488-SONY (7669) Repair / Replacement Warranty: This Limited Warranty shall apply to any repair, replacement part or replace- ment product for the remainder of the original Limited Warranty period or for ninety (90) days, whichever is longer. Any parts or product replaced under this Limited Warranty will become the property of Sony. This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary consumer use; it does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, misuse, limitations of technology, or modification of or to any part of the Sony product. This Limited Warranty does not cover Sony products sold AS IS or WITH ALL FAULTS or consumables (such as fuses or batteries). This Limited Warranty is invalid if the factory-applied serial number has been altered or removed from the product. This Limited Warranty is valid only in the United States. LIMITATION ON DAMAGES: SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to state. Car Audio 3-272-643-01 Printed in Japan

© 2004 Sony Corporation Printed in Korea 3-261-849-11 (1) Cautions •This unit is designed for negative ground 12 V DC operation only. •Do not get the leads under a screw, or caught in moving parts (e.g. seat railing). •Before making connections, turn the car ignition off to avoid short circuits. •Connect the yellow and red power input leads only after all other leads have been connected. •Run all ground leads to a common ground point. •Be sure to insulate any loose unconnected leads with electrical tape for safety. •The use of optical instruments with this product will increase eye hazard. Notes on the power supply lead (yellow) •When connecting this unit in combination with other stereo components, the connected car circuit’s rating must be higher than the sum of each component’s fuse. •When no car circuits are rated high enough, connect the unit directly to the battery. Parts Iist (1) •The numbers in the list are keyed to those in the instructions. •The bracket 1 and the protection collar 3 are attached to the unit before shipping. Before mounting the unit, use the release keys 5 to remove the bracket 1 and the protection collar 3 from the unit. For details, see “Removing the protection collar and the bracket (4)” on the reverse side of the sheet. •Keep the release keys 5 for future use as they are also necessary if you remove the unit from your car. Caution Handle the bracket 1 carefully to avoid injuring your fingers. Note Before installing, make sure that the catches on both sides of the bracket 1 are bent inwards 2 mm (3/32 in). If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. Installation/Connections Installation/Connexions FM/AM Compact Disc Player Connection example (2) Notes (2-A) • Be sure to connect the ground lead before connecting the amplifier. • If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. Tip (2-B- ) For connecting two or more CD/MD changers, the source selector XA-C30 (optional) is necessary. Connection diagram (3) 1 To a metal surface of the car First connect the black ground lead, then connect the yellow and red power input leads. 2 To the power antenna control lead or power supply lead of antenna booster amplifier Notes • It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually-operated telescopic antenna. • When your car has a built-in FM/AM antenna in the rear/side glass, see “Notes on the control and power supply leads.” 3 To AMP REMOTE IN of an optional power amplifier This connection is only for amplifiers. Connecting any other system may damage the unit. 4 To the interface cable of a car telephone 5 To the +12 V power terminal which is energized in the accessory position of the ignition key switch Notes • If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to connect the black ground lead to a metal surface of the car first. • When your car has a built-in FM/AM antenna in the rear/side glass, see “Notes on the control and power supply leads.” 6 To the +12 V power terminal which is energized at all times Be sure to connect the black ground lead to a metal surface of the car first. 1 3 2 Equipment used in illustrations (not supplied) Appareils utilisés dans les illustrations (non fournis) Rear speaker Haut-parleur arrière Front speaker Haut-parleur avant 1 Power amplifier Amplificateur de puissance 5 × 2 4 Active subwoofer Caisson de graves actif CDX-F5500 CDX-F5000 Catch 1 × 4 AUDIO OUT REAR AUDIO OUT FRONT BUS AUDIO IN BUS CONTROL IN BUS AUDIO IN BUS CONTROL IN Source selector* Sélecteur de source* XA-C30 * not supplied non fourni 2 A B CD/MD changer Changeur de CD/MD Rotary commander RM-X4S Satellite de commande RM-X4S CDX-F5500 only CDX-F5500 uniquement

Operating Instructions Mode d’emploi Owner’s Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. CDX-F5000 Serial No. CDX-F5000 For installation and connections, see the supplied installation/connections manual. En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/raccordement fourni. 3-261-847-11 (1) US FR © 2004 Sony Corporation FM/AM Compact Disc Player

1 Ver 1.1 2004. 05 Model Name Using Similar Mechanism CDX-R3000/RW300 CD Drive Mechanism Type MG-611XA-186//K Optical Pick-up Name KSS1000E SERVICE MANUAL US Model CDX-F5000/FW500 Canadian Model CDX-F5000 CDX-F5000/FW500 AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 23.2 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion. CD player section Signal-to-noise ratio 120 dB Frequency response 10 – 20,000 Hz Wow and flutter Below measurable limit Tuner section FM Tuning range 87.5 – 107.9 MHz Antenna terminal External antenna connector Intermediate frequency 10.7 MHz/450 kHz Usable sensitivity 9 dBf Selectivity 75 dB at 400 kHz Signal-to-noise ratio 67 dB (stereo), 69 dB (mono) Harmonic distortion at 1 kHz 0.5% (stereo), 0.3% (mono) Separation 35 dB at 1 kHz Frequency response 30 – 15,000 Hz AM Tuning range 530 – 1,710 kHz Antenna terminal External antenna connector Intermediate frequency 10.7 MHz/450 kHz Sensitivity 30 µV Power amplifier section Outputs Speaker outputs (sure seal connectors) Speaker impedance 4 – 8 ohms Maximum power output 52 W × 4 (at 4 ohms) SPECIFICATIONS General Outputs Audio outputs terminal (rear/sub switchable) Power antenna relay control terminal Power amplifier control terminal Inputs Telephone ATT control terminal Remote controller input terminal BUS control input terminal BUS audio input terminal Antenna input terminal Tone controls Low: ±10 dB at 60 Hz (XPLOD) Mid: ±10 dB at 1 kHz (XPLOD) High: ±10 dB at 10 kHz (XPLOD) Power requirements 12 V DC car battery (negative ground) Dimensions Approx. 178 × 50 × 177 mm (7 1/8 × 2 × 7 in.) (w/h/d) Mounting dimensions Approx. 182 × 53 × 161 mm (7 1/4 × 2 1/8 × 6 3/8 in.) (w/h/d) Mass Approx. 1.2 kg (2 lb. 10 oz.) Supplied accessories Parts for installation and connections (1 set) Front panel case (1) Card remote commander RM-X115 Design and specifications are subject to change without notice. • The tuner and CD sections have no adjustments. Sony Corporation e Vehicle Company Published by Sony Engineering Corporation 9-961-429-02 2004E04-1 © 2004. 05 FM/AM COMPACT DISC PLAYER

Operating Instructions XM Satellite Radio Receiver XT-XM1 Sony Corporation © 2002 Printed in Japan Owner’s Record The model number is located on the bottom and serial number also on the bottom. Record the serial number in the space provide below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. XT-XM1 Serial No. XM Radio ID You need to subscribe for XMTM Satellite Radio Service to listen to the radio broadcast. WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. 3-243-168-11 (1) If you have any questions or problem concerning this product, consult your nearest Sony dealer. If you have any questions or problem concerning the XM Satellite radio service including the broadcast, consult XM. The XM Radio ID (XM-ID) is required when consulting XM. It is located on the bottom of the main unit, and you can also check it in the display of this unit (see “Displaying the XM Radio ID”). Welcome! Thank you for purchasing the Sony XM Satellite Radio Receiver. The receiver allows you to: •Receive XM Satellite Radio programming (with subscription) by connecting a Sony master unit* compatible with the Sony BUS system. •Connect and use an optional CD or MD changer. •Receive up to 100 channels of XM programming. •Display channel name, artist name, and song title for most XM channels. •Store up to 20 favorite XM channels. •Search XM channels by category. * Some master units may not be connected to this receiver. (For details, please consult your nearest Sony dealer.) Introducing XMTM Satellite Radio There’s a world beyond AM and FM. XM Satellite Radio. Up to 100 channels. Coast-to- Coast Coverage. Digital quality sound. With many commercial-free music channels. Plus, the best sports, comedy, talk, news and entertainment, including USA Today, Discovery Radio, NASCAR, Sesame Workshop, CNNfn and CNN/SI. Questions? Visit www.xmradio.com. The future is waiting. How to Subscribe Listeners can subscribe by visiting XM on the Web at www.xmradio.com or by calling XM’s Listener Care at (800)852-9696. Customers should have their Radio ID ready; it is located on the bottom of the main unit, and you can also check it in the display of this unit (see “Displaying the XM Radio ID”). Technology. It is prohibited to copy, decompile, disassemble, reverse engineer or manipulate any technology incorporated in receivers compatible with the XM Satellite Radio system. Furthermore, the AMBE® voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this or any other software contained in an XM Radio is explicitly prohibited from attempting to copy, decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into human-readableform. The software is licensed solely for use within this product. Getting Started Resetting the master unit Before operating the XM receiver for the first time, reset the master unit. If the unit is not reset in this manner, it may not function properly. For details on how to reset it, refer to the operating instructions of the master unit. Caution For the following master units, press the Repeat (REP) button of the master unit for two seconds after turning the XM on and select “setup 2.” Without this procedure, the master unit will not display tuning-in information from the receiver correctly. Except for the following master units, “setup 1” is selected in the factory settings. CDX-C8050X CDX-C800REC* CDX-M750 CDX-M650 CDX-M610 CDX-M600 MDX-C8500X XR-M550 * You may observe flickering in parts of the display while performing operations. This is not malfunction. Note Resetting the master unit will erase the clock setting and some stored contents of the master unit. Using category search to locate channels Each XM channel is associated with a category that describes the type of music or programming that is played on the channel. Examples of categories include “rock,” “jazz,” “news,” and so on. Users unfamiliar with XM’s programming may use the radio’s search-by-category function to select channels. 1 Press the Repeat (REP) button to enter category search mode. The category of the current channel is displayed. With some master units, the Repeat button is only equipped on the remote control. 2 Press the Disc/Preset buttons repeatedly until you find the desired category. 3 Press the Seek buttons repeatedly until you find the desired channel in that category. The display shows “CAT SRCH” to indicate that the radio is in category search mode. While in this mode, you will only be able to tune to channels in the selected category. You may use the Disc/Preset buttons to choose other categories. 4 To exit from category search mode and return to the normal mode, press the Repeat (REP) button. The radio automatically returns to the normal mode if there no key is pressed within 5 seconds. Storing favorite channels You can preset up to 20 channels. 1 Tune in a channel that you want to store. 2 Press the Shuffle (SHUF) button. The radio will show a list of presets, starting with preset number 1. The preset number will be shown if a channel has already been stored into the preset. With some master units, the Shuffle button is only equipped on the remote control. 3 Press the Disc/Preset button to select a preset number. With some master units, the Disc/Preset button is only equipped on the remote control. 4 Press the Disc/Preset + (Disc +) button for 2 seconds. The display shows “MEMORY” if the radio successfully stores the channel into the preset. The display shows “FAILURE” if the radio fails to store the channel into the preset. The radio automatically returns to the normal mode if there no key is pressed within 5 seconds. Receiving a stored channel • Press either Disc/Preset button to select the preset channel you want to listen to. • Press the Shuffle (SHUF) button. Press the Disc/Preset + (DISC +) button to select the preset channel and then press the SEEK + or SEEK – button to start. Displaying the XM Radio ID 1 During XM Satellite Radio reception, press the Seek button to select “CHANNEL 1.” 2 Press the “Seek – (down)” button. “RADIO ID” is indicated for 2 seconds and the XM Radio ID number is indicated for 10 seconds. These indications will be displayed alternately. To cancel the XM Radio ID display, press the Seek button to select a channel. Basic Operations Listening to a program The XM receiver is controlled by the master unit. Button locations vary with different master unit models. Please refer to the master unit instruction manuals. 1 To select XM: a. Press the Source button until “XM” is displayed. -or- b. Press the Source button until “MD” is displayed, then press the Mode button to select XM. For master units which can control more than one MD changer, press the Mode button repeatedly (the display will show “MD1,” “MD2,” etc.) until the receiver is found. 2 Press either Seek button to select the desired channel. Pressing and holding the Seek button will quickly step through the channels. Note “LOADING” is indicated while the receiver is reading the information. Display items The XM Satellite Radio information (Channel Name, Channel Number, Artist Name/Program Name and Song Title) is available on the display. Press the Display (DSPL) button. Each time you press the Display (DSPL) button, the item changes as follows: Channel Name t Channel Number t Artist Name/Program Name t Song Title t For MEX-5DI, press the ENTER button of the remote control to change the display item. Notes • While Artist Name/Program Name or Song Title is displayed, if you select a channel, Channel Name will be displayed for 2 to 3 seconds and then return to the previous display. • If there is no information about Artist Name/ Program Name or Song Title, “- - - -” will be displayed. • During XM Satellite Radio reception, Spectrum Analyzer, Dual Information, Motion Display function of the master unit cannot be operated. • The display indicates up to 8 characters. The characters on the display cannot be scrolled even when the Auto Scroll function of the master unit is set to on. • You cannot display the clock during XM Satellite Radio reception on a master unit whose clock display is shown by pressing the Display (DSPL) button. Additional Information Specifications Frequency 2332.5 – 2345.0 MHz Power requirements 12 V DC car battery (negative ground) Outputs BUS control output Audio output Inputs Antenna input (Satellite, Terrestrial) BUS control input Audio input Dimensions 224 × 37.8 × 160 mm (8 7/8 × 1 1/2 × 6 3/8 in.) (w/h/d) Mass Approx. 1.0 kg (2 lb. 4 oz.) Supplied accessories Parts for installation and connection (1 set) Design and specifications are subject to change without notice. Troubleshooting Should any problem persist after you have made the following checks, consult your nearest Sony dealer. Consult XM if you have any questions or problem concerning the broadcast service of the XM Satellite radio. The information on the display cannot be changed during XM Satellite Radio reception. •Refer to “Caution” in “Getting Started.” No sound. •Adjust the volume control of the master unit. •Cancel the attenuate function of the master unit. •The connecting cords are not connected properly. The sound is hampered by noises. Locate codes and cables such as an antenna code, a BUS cable, an RCA pin code, or a power code so as they do not interfere each other. The channels cannot be received. Check the connection of the receiver and the antenna. Advisory Message When a problem occurs with the receiver, an error message will be indicated on the display of the master unit. ANTENNA The antenna is not connected properly. t Check the connection of the receiver and the antenna. UPDATING You have not subscribed to XM, or the channel is not authorized. t You need to subscribe to XM. NO SIGNL XM signal is too weak. t Move to another area where your system can receive the signal. OFF AIR The channel is not broadcasted now. t Select another channel. LOADING The receiver is reading the channel information t Wait until the receiver completes receiving the information. “– – – –” or “CH – – –” •The channel to be tuned-in is void due to the change by the broadcast service, or the receiving condition is not good. •There is no text information or time information in the channel. This is not an error.