Sony CFD-RS60CP Manuals

WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. Connect the apparatus to an easily accessible AC outlet. Should you notice an abnormality in the apparatus, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the battery to excessive heat such as direct sunlight, fire or the like. Excessive sound pressure from earphones and headphones can cause hearing loss. 3-277-987-12(1) CD Radio Cassette-Corder Operating Instructions GB CFD-RS60CP © 2007 Sony Corporation Printed in China Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Applicable accessories: Remote control Power sources Specifications CD player section System Compact disc digital audio system Laser diode properties Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Spindle speed 200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels 2 Frequency response 20 - 20 000 Hz +1/–2 dB Wow and flutter Below measurable limit Radio section Frequency range 120 V model FM: 87.5 - 108 MHz AM: 530 - 1 710 kHz Other models FM: 87.5 - 108 MHz AM: 531 - 1 611 kHz (9 kHz step) 530 - 1 610 kHz (10 kHz step) Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna Cassette-corder section Recording system 4-track 2 channel stereo Fast winding time Approx. 120 s (sec.) with Sony cassette C-60 Frequency response TYPE I (normal): 80 - 10 000 Hz USB section Supported bit rate MP3 (MPEG 1 Audio Layer-3): 32 - 320 kbps, VBR Sampling frequencies MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz  (USB) port USB-A (Full Speed) General Speaker Full range: 10 cm dia., 3.2 Ω, cone type (2) Input  (USB) port: Type A, maximum current 500 mA Outputs Headphones jack (stereo minijack) For 16 - 68 Ω impedance headphones Power output 2.3 W + 2.3 W (at 3.2 Ω, 10% harmonic distortion) Power requirements For CD radio cassette-corder: Malaysia, Singapore and Thailand models: 230 - 240 V AC, 50 Hz Mexico model: 120 V AC, 60 Hz Other models: 230 V AC, 50 Hz 9 V DC, 6 R20 (size D) batteries For remote control: 3 V DC, 2 R03 (size AAA) batteries Power consumption AC 18 W Battery life For CD radio cassette-corder: FM recording Sony R20P: approx. 13.5 h Sony alkaline LR20: approx. 20 h Tape playback Sony R20P: approx. 7 h Sony alkaline LR20: approx. 12 h CD playback Sony R20P: approx. 2.5 h Sony alkaline LR20: approx. 7 h Dimensions Approx. 420 × 158.5 × 260 mm (w/h/d) (incl. projecting parts) Mass Approx. 3.8 kg (incl. batteries) Supplied accessories AC power cord (1) Remote control (1) Design and specifications are subject to change without notice. Optional accessories Sony MDR headphones series Audio CD Track number Playing time MP3 disc MP3 file number After the file name is displayed, the playing time will appear To Press Pause playback  on the unit ( on the remote) . To resume play, press it again. Stop playback  . Go to the next track/MP3 file  . Go back to the previous track/ MP3 file  . Select a folder on an MP3 disc + on the unit to go forward and – to go backward . (On the remote, use FOLDER + or – .) Locate a point while listening to the sound  (forward) or  (backward)  on the unit while playing and hold it until you find the point (On the remote, use  or  .) Locate a point while observing the display  (forward) or  (backward)  on the unit in pause and hold it until you find the point (On the remote, use  or  .) Locate a specific track/MP3 file directly the number button  of the track/ MP3 file on the remote. Remove the CD  PUSH OPEN/CLOSE . Tips  Playback starts from the track/MP3 file you last stopped playing (Resume play). During stop, the track/MP3 file number to be played is displayed.  To cancel the resume play (to start play from the beginning of the first track/MP3 file), press   or open the CD compartment in stop mode. To locate a track by number on the remote (Example) For track/MP3 file number 1: Press 1 , and then ENTER . For track/MP3 file number 12: Press 1, 2 , and then ENTER . For track/MP3 file number 123: Press 1, 2, 3 , and then ENTER . Note You cannot locate a specific track/MP3 file if “SHUF” or “PGM” is lit in the display. Turn off the indication by pressing MODE . Example of folder structure and playing order The playing order of the folders and files is as follows: Folder MP3 file Notes on MP3 discs  When the disc is inserted, the unit reads all the files on that disc. During this time, “READING” is displayed. If there are many folders or non-MP3 files on the disc, it may take a long time for play to begin or for the next MP3 file to start play. Do not save unnecessary folders or files other than MP3 ones in the disc to be used for MP3 listening.  Locating a specific MP3 file using the number buttons  on the remote is only available for the MP3 files in the selected folder.  A folder that does not include an MP3 file is skipped.  Maximum number of files: 255  Maximum number of folders: 150 Maximum number of folders and files in total: 300 Maximum directory steps: 8  Folder names and file names can be displayed with up to 32 characters.  The characters A - Z, a - z, 0 - 9, and _ can be displayed on this unit. Other characters are displayed as “_”.  This unit conforms to Version 1.1 of the ID3 tag format. If the file has the ID3 tag information, “song title”, “artist name”, and “album name” can be displayed.  When naming, be sure to add the file extension “mp3” to the file name.  If you put the extension “mp3” to a file other than an MP3 file, the unit cannot recognize the file properly and will generate random noise that could damage your speakers.  The file name does not correspond to the ID3 tag. Listening to the radio 1 Press RADIO  on the unit (BAND  on the remote) repeatedly. Each time you press the button, the indication changes as follows: “FM”  “AM”. 2 Hold down TUNE + or –  until the frequency digits begin to change in the display. The unit automatically scans the radio frequencies and stops when it finds a clear station. If you cannot tune in a station, press TUNE + or –  repeatedly to change the frequency step by step. When an FM stereo broadcast is received, “ST” appears. Tip If the FM broadcast is noisy, press MODE  until “Mono” appears in the display and the radio will play in monaural. Changing the AM tuning interval (Except for the 120 V model) If you need to change the AM tuning interval, do the following: 1 Press RADIO  on the unit until “AM” is displayed. 2 Press DISP/ENT/MEMORY  on the unit for 2 seconds. 3 Press RADIO  on the unit for 2 seconds. “9K STEP” or “10K STEP” flashes. 4 Press PRESET + or –  on the unit to select “9K STEP” for 9 kHz interval or “10K STEP” for 10 kHz interval. 5 Press DISP/ENT/MEMORY  on the unit. After changing the tuning interval, you need to reset your preset AM radio stations. Playing a tape Use buttons on the unit for the operation. 1 Press TAPE  on the unit. 2 Press   on the unit, and insert the tape into the tape compartment with the side you want to play facing you. Use TYPE I (normal) tape only. Close the compartment. Make sure there is no slack in the tape to avoid damaging the tape or the unit. 3 Press   on the unit. The unit starts playing. To Press Pause playback   on the unit. To resume play, press it again. Stop playback   on the unit. Fast-forward or rewind  or  (fast forward or rewind)  on the unit. Eject the cassette   on the unit. Recording on a tape Use buttons on the unit for the operation. 1 Press   on the unit to open the tape compartment and insert a blank tape with the side you want to record on facing you. Use TYPE I (normal) tape only. Close the compartment. 2 Select the program source you want to record. To record from the CD player, place a CD and press CD  on the unit. To record from the radio, tune in the station you want. 3 Press   on the unit to start recording ( is depressed automatically). To Press Pause recording   on the unit. Press the button again to resume recording. Stop recording   on the unit. Tips  Adjusting the volume or the audio emphasis will not affect the recording level.  If the AM program makes a whistling sound after you’ve pressed   in step 3, press MODE  on the unit to select the position of ISS (Interference Suppress Switch) that most decreases the noise.  For the best results, use the AC power as a power source for recording.  To erase a recording, proceed as follows: 1 Insert the tape whose recording you want to erase. 2 Press TAPE  on the unit. 3 Press   on the unit. Listening to music of a USB device You can listen to music stored on an optional USB device (digital music player or USB storage media). Only music files in the MP3 format* can be played on this unit. See “Playable/Recordable USB devices” on the back page for a list of the USB devices that can be connected to this unit. * Files with copyright protection (Digital Rights Management) cannot be played on this unit. 1 Press USB  on the unit. 2 Connect the USB device to the  (USB) port  on the unit. “USB MEMORY” appears in the display. 3 Press  . The unit starts playing. MP3 file number After the file name is displayed, the playing time will appear 4 Press VOLUME + or – (or VOL + or – on the remote)  to adjust the volume. Other operation To Press Pause playback  (or  on the unit) . To resume play, press the button again*. Stop playback  . Select a folder + or – . Select a file  or  . Find a point in a file Hold down  or   during playback, and release the button at the desired point. Select Repeat Play REPEAT  on the unit repeatedly until “ ” or “ 1” appears. Remove the USB device Hold down   until “NO DEV” appears, then remove the USB device. * When playing a VBR MP3 file, the unit may resume playback from a different point. To change the play mode Press MODE  repeatedly while the USB device is not playing. You can select Normal Play (“ ” for all files in the folder on the USB device), Shuffle Play (“SHUF” or “ SHUF”), or Program Play (“PGM”). Notes on the USB device  You cannot change the play mode during playback.  Some time may be needed before playback starts when: – the folder structure is complex. – the USB device is close to capacity.  When a USB device is connected, the unit reads all the files on the device. If there are many folders or files on the device, it may take a long time for the unit to finish reading them.  Do not connect a USB device to the unit through a USB hub.  In the case of some USB devices, when an operation is performed on the USB device, there may be a delay before it is carried out on this unit.  This unit may not support all the functions provided on the connected USB device.  Files recorded by this unit are played back in the order of folder creation. Files recorded by a device other than this unit (such as a computer) may not play back in the order in which they were recorded.  The playback order on this unit may differ from the playback order on the connected USB device.  Always hold down   and make sure that “NO DEV” appears before removing the USB device. Removing the USB device while “NO DEV” is not displayed may corrupt the data on the USB device or damage the USB device itself.  Do not save non-MP3 files or unnecessary folders to a USB device that contains MP3 files.  During playback, folders that contain no MP3 files are skipped.  This unit can play only MP3 files that have the “MP3” file extension.  If there are files on the disc that have the “.MP3” file extension, but are not MP3 files, the unit may produce noise or malfunction.  A maximum of 999 MP3 files and 999 folders can be contained on a single USB device. The maximum number of MP3 files and folders may vary, depending on the file and folder structure.  Compatibility with all MP3 encoding/writing software, recording devices, and recording media cannot be guaranteed. If you use an incompatible USB device, the sound skipping or noise may be produced, or the device may not play at all. Recording from a disc to a USB device By connecting a USB device (digital music player or USB storage media) to the  (USB) port  on the unit, you can record music from a disc to the USB device. This unit supports recording from CD-DA and MP3 discs only. Sound from this unit’s cassette player or radio cannot be recorded to a USB device. Audio files are recorded on this unit in the MP3 format. The approximate recording size is about 1 MB per minute of recording time from a CD. The file size may be larger for recordings made from an MP3 disc. See “Playable/Recordable USB devices” on the back page for a list of the USB devices that can be connected to this unit. Synchro Recording This function allows you to easily record an entire disc onto a USB device. See also “Recording a single track or MP3 file to a USB device during playback” on the back page. 1 Connect a USB device with recording capability to the  (USB) port . If a USB cable is necessary, use the USB cable supplied with the device to be connected. Refer to the operation manual supplied with the USB device for connection details. 2 to the wall outlet 1 to AC IN   Connect the AC power cord  or insert six R20 (size D) batteries (not supplied) into the battery compartment . Notes  Replace the batteries when the OPR/BATT  indicator dims or when the unit stops operating. Replace all the batteries with new ones. Before you replace the batteires, be sure to take out the CD from the unit.  To use the unit on batteries, disconnect the AC power cord from the unit.  When you operate the unit on batteries, you cannot turn on the unit using the remote. Preparing the remote Insert two R03 (size AAA) batteries (not supplied). Replacing batteries With normal use, the batteries should last for about six months. When the remote no longer operates the unit, replace all the batteries with new ones. Basic Operations 2 Press CD  and insert the disc that you want to record. 3 When the CD player is stopped, press MODE  repeatedly to select the play mode. The play mode automatically changes to Normal Play if the unit is in Shuffle Play, Repeat Play or Program Play (with no tracks or MP3 files programmed) at the start of recording. For details about play modes, see “To change the play mode” in “Listening to music of a USB device”. 4 Press CD-USB SYNC/REC1  on the unit. “REC” flashes and the display cycles through “CD SYNC”, “FREExxxM”* (free space on the USB device), and “PUSH ENT”. The USB device changes to recording standby and the unit to play pause. * If the amount of free space is in the gigabyte range, “FREExxxG” will be displayed as the unit. 5 Press DISP/ENT/MEMORY  on the unit (or ENTER  on the remote). Recording starts. The unit and the USB device automatically stop when the recording is completed. To stop recording Press  . To remove the USB device 1 Press USB  when the unit is stopped playing. 2 Hold down   on the unit until “NO DEV” appears. 3 Remove the USB device. To erase MP3 files or folders on a USB device You can erase MP3 files or folders that are on a USB device. 1 Connect a USB device with recording capability to the  (USB) port . 2 Press USB  on the unit. 3 Press  or   repeatedly to select the MP3 file or folder that you want to erase. 4 Press ERASE  on the unit. When you erase a track, “TRACK” appears, followed by “ERASE?” When you erase a folder, “FOLDER” appears, followed by “ERASE?” To cancel the erase operation, press  . 5 Press DISP/ENT/MEMORY  on the unit (or ENTER  on the remote). The selected MP3 file or folder is erased. Folder and file generation rules When a recording operation is first performed on a USB device, a “MUSIC” folder is created directly below the “ROOT”. Folders and files are generated within this “MUSIC” folder as follows, according to the recording method. Synchro Recording1) Recording source Folder name File name MP3 Same as the recording source2) CD-DA “FLDR001”3) “TRACK001”4) REC1 recording5) Recording source Folder name File name MP3 “REC1”6) Same as the recording source2) CD-DA “TRACK001”4) 1) In Program Play, the folder name is “FLDRxxx”, and the file name depends on the recording source (CD-DA disc or MP3 disc). For details about play modes, see “To change the play mode” in “Listening to music on a USB device”. 2) Up to 32 characters of the name are assigned. 3) Folder names are assigned in sequential order up to a maximum of 999 (including root and MUSIC). 4) File names are assigned in sequential order. 5) See “Recording a single track or MP3 file to a USB device during playback” on the back page. 6) A new file is recorded to the “REC1” folder each time REC1 recording is performed. Notes  Do not remove the USB device during recording or erase operations. Doing so may corrupt the data on the USB device or damage the USB device itself.  Do not connect a USB device to the unit through a USB hub.  When recording from a CD, the tracks are recorded as MP3 files at 128 kbps. When recording from an MP3 disc, MP3 files are recorded with the same bit rate as the original MP3 files.  While recording from an MP3 disc, no sound is output and “HI- SPEED” appears.  CD text information is not included in the MP3 files.  If you cancel a recording before it is completed, an MP3 file is created with the contents up to the point the recording was stopped.  Recording stops automatically if: – the USB device runs out of space during recording, or – the number of MP3 files on the USB device reaches the limit that the unit can recognize.  A maximum of 999 MP3 files and 999 folders can be contained on a single USB device (including root and MUSIC). The maximum number of MP3 files and folders may vary, depending on the MP3 file and folder structure.  You cannot erase MP3 files and folders in Shuffle Play or Program Play.  If a folder to be erased contains non-MP3 format files or sub folders, these are not erased.  If a folder or file with the same name as the one you are trying to record already exists on the USB device, a sequential number is added after the name for the newly recorded folder or file to avoid overwriting the existing one.  When recording tracks from an MP3 disc to a USB device, there is no sound output. Basic Operations * VOLUME + (VOL + on the remote) ,  ,   and 5  on the remote have a tactile dot. Before using the unit About the operating voltage The unit’s operating voltage is shown on the bottom of the unit. For changing the AM tuning interval, radio frequency range, and AC operation, check the operating voltage of your unit. To turn on/off the power Press OPERATE . To adjust the volume Press VOLUME +, – (VOL +, – on the remote) . To listen through headphones Connect the headphones to the  (headphones) jack . To select the sound characteristic Press SOUND  on the unit repeatedly to select the audio emphasis you want. Choose To get ROCK powerful, clean sounds, emphasizing low and high range audio POP light, bright sounds emphasizing high and middle range audio JAZZ percussive sounds, emphasizing bass audio VOCAL the presence of vocals, stressing middle range audio OFF the whole dynamic range for music such as classical music To reinforce the bass sound Press MEGA BASS  on the unit. “MEGA BASS” appears in the display. To return to normal sound, press the button again. Playing a CD/MP3 disc 1 Press CD  on the unit. (On the remote, press OPERATE  and then press FUNCTION  repeatedly until “CD” appears in the display.) 2 Press  PUSH OPEN/CLOSE  on the unit, and place a disc with the label side up on the CD compartment. To close the CD compartment, press  PUSH OPEN/ CLOSE  on the unit. 3 Press  on the unit ( on the remote) . The unit plays all the tracks/MP3 files once. When you place MP3 discs, “MP3” appears in the display after the unit reads the file information. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses given in separate service or guarantee documents. Notes on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. Connect the apparatus to an easily accessible AC outlet. Should you notice an abnormality in the apparatus, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the battery to excessive heat such as direct sunlight, fire or the like. 3-277-987-11(1) CD Radio Cassette-Corder Operating Instructions GB CFD-RS60CP © 2007 Sony Corporation Printed in China Excessive sound pressure from earphones and headphones can cause hearing loss. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Applicable accessories: Remote control Power sources Specifications CD player section System Compact disc digital audio system Laser diode properties Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Spindle speed 200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels 2 Frequency response 20 - 20 000 Hz +1/–2 dB Wow and flutter Below measurable limit Radio section Frequency range 120 V model FM: 87.5 - 108 MHz AM: 530 - 1 710 kHz Other models FM: 87.5 - 108 MHz AM: 531 - 1 611 kHz (9 kHz step) 530 - 1 610 kHz (10 kHz step) Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna Cassette-corder section Recording system 4-track 2 channel stereo Fast winding time Approx. 120 s (sec.) with Sony cassette C-60 Frequency response TYPE I (normal): 80 - 10 000 Hz USB section Supported bit rate MP3 (MPEG 1 Audio Layer-3): 32 - 320 kbps, VBR Sampling frequencies MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz  (USB) port USB-A (Full Speed) General Speaker Full range: 10 cm dia., 3.2 Ω, cone type (2) Input  (USB) port: Type A, maximum current 500 mA Outputs Headphones jack (stereo minijack) For 16 - 68 Ω impedance headphones Power output 2.3 W + 2.3 W (at 3.2 Ω, 10% harmonic distortion) Power requirements For CD radio cassette-corder: Malaysia, Singapore and Thailand models: 230 - 240 V AC, 50 Hz Mexico model: 120 V AC, 60 Hz Other models: 230 V AC, 50 Hz 9 V DC, 6 R20 (size D) batteries For remote control: 3 V DC, 2 R03 (size AAA) batteries Power consumption AC 18 W Battery life For CD radio cassette-corder: FM recording Sony R20P: approx. 13.5 h Sony alkaline LR20: approx. 20 h Tape playback Sony R20P: approx. 7 h Sony alkaline LR20: approx. 12 h CD playback Sony R20P: approx. 2.5 h Sony alkaline LR20: approx. 7 h Dimensions Approx. 420 × 158.5 × 260 mm (w/h/d) (incl. projecting parts) Mass Approx. 3.8 kg (incl. batteries) Supplied accessories AC power cord (1) Remote control (1) Design and specifications are subject to change without notice. Optional accessories Sony MDR headphones series Audio CD Track number Playing time MP3 disc MP3 file number After the file name is displayed, the playing time will appear To Press Pause playback  on the unit ( on the remote) . To resume play, press it again. Stop playback  . Go to the next track/MP3 file  . Go back to the previous track/ MP3 file  . Select a folder on an MP3 disc + on the unit to go forward and – to go backward . (On the remote, use FOLDER + or – .) Locate a point while listening to the sound  (forward) or  (backward)  on the unit while playing and hold it until you find the point (On the remote, use  or  .) Locate a point while observing the display  (forward) or  (backward)  on the unit in pause and hold it until you find the point (On the remote, use  or  .) Locate a specific track/MP3 file directly the number button  of the track/ MP3 file on the remote. Remove the CD  PUSH OPEN/CLOSE . Tips  Playback starts from the track/MP3 file you last stopped playing (Resume play). During stop, the track/MP3 file number to be played is displayed.  To cancel the resume play (to start play from the beginning of the first track/MP3 file), press   or open the CD compartment in stop mode. To locate a track by number on the remote (Example) For track/MP3 file number 1: Press 1 , and then ENTER . For track/MP3 file number 12: Press 1, 2 , and then ENTER . For track/MP3 file number 123: Press 1, 2, 3 , and then ENTER . Note You cannot locate a specific track/MP3 file if “SHUF” or “PGM” is lit in the display. Turn off the indication by pressing MODE . Example of folder structure and playing order The playing order of the folders and files is as follows: Folder MP3 file Notes on MP3 discs  When the disc is inserted, the unit reads all the files on that disc. During this time, “READING” is displayed. If there are many folders or non-MP3 files on the disc, it may take a long time for play to begin or for the next MP3 file to start play. Do not save unnecessary folders or files other than MP3 ones in the disc to be used for MP3 listening.  Locating a specific MP3 file using the number buttons  on the remote is only available for the MP3 files in the selected folder.  A folder that does not include an MP3 file is skipped.  Maximum number of files: 255  Maximum number of folders: 150 Maximum number of folders and files in total: 300 Maximum directory steps: 8  Folder names and file names can be displayed with up to 32 characters.  The characters A - Z, a - z, 0 - 9, and _ can be displayed on this unit. Other characters are displayed as “_”.  This unit conforms to Version 1.1 of the ID3 tag format. If the file has the ID3 tag information, “song title”, “artist name”, and “album name” can be displayed.  When naming, be sure to add the file extension “mp3” to the file name.  If you put the extension “mp3” to a file other than an MP3 file, the unit cannot recognize the file properly and will generate random noise that could damage your speakers.  The file name does not correspond to the ID3 tag. Listening to the radio 1 Press RADIO  on the unit (BAND  on the remote) repeatedly. Each time you press the button, the indication changes as follows: “FM”  “AM”. 2 Hold down TUNE + or –  until the frequency digits begin to change in the display. The unit automatically scans the radio frequencies and stops when it finds a clear station. If you cannot tune in a station, press TUNE + or –  repeatedly to change the frequency step by step. When an FM stereo broadcast is received, “ST” appears. Tip If the FM broadcast is noisy, press MODE  until “Mono” appears in the display and the radio will play in monaural. Changing the AM tuning interval (Except for the 120 V model) If you need to change the AM tuning interval, do the following: 1 Press RADIO  on the unit until “AM” is displayed. 2 Press DISP/ENT/MEMORY  on the unit for 2 seconds. 3 Press RADIO  on the unit for 2 seconds. “9K STEP” or “10K STEP” flashes. 4 Press PRESET + or –  on the unit to select “9K STEP” for 9 kHz interval or “10K STEP” for 10 kHz interval. 5 Press DISP/ENT/MEMORY  on the unit. After changing the tuning interval, you need to reset your preset AM radio stations. Playing a tape Use buttons on the unit for the operation. 1 Press TAPE  on the unit. 2 Press   on the unit, and insert the tape into the tape compartment with the side you want to play facing you. Use TYPE I (normal) tape only. Close the compartment. Make sure there is no slack in the tape to avoid damaging the tape or the unit. 3 Press   on the unit. The unit starts playing. To Press Pause playback   on the unit. To resume play, press it again. Stop playback   on the unit. Fast-forward or rewind  or  (fast forward or rewind)  on the unit. Eject the cassette   on the unit. Recording on a tape Use buttons on the unit for the operation. 1 Press   on the unit to open the tape compartment and insert a blank tape with the side you want to record on facing you. Use TYPE I (normal) tape only. Close the compartment. 2 Select the program source you want to record. To record from the CD player, place a CD and press CD  on the unit. To record from the radio, tune in the station you want. 3 Press   on the unit to start recording ( is depressed automatically). To Press Pause recording   on the unit. Press the button again to resume recording. Stop recording   on the unit. Tips  Adjusting the volume or the audio emphasis will not affect the recording level.  If the AM program makes a whistling sound after you’ve pressed   in step 3, press MODE  on the unit to select the position of ISS (Interference Suppress Switch) that most decreases the noise.  For the best results, use the AC power as a power source for recording.  To erase a recording, proceed as follows: 1 Insert the tape whose recording you want to erase. 2 Press TAPE  on the unit. 3 Press   on the unit. Listening to music of a USB device You can listen to music stored on an optional USB device (digital music player or USB storage media). Only music files in the MP3 format* can be played on this unit. See “Playable/Recordable USB devices” on the back page for a list of the USB devices that can be connected to this unit. * Files with copyright protection (Digital Rights Management) cannot be played on this unit. 1 Press USB  on the unit. 2 Connect the USB device to the  (USB) port  on the unit. “USB MEMORY” appears in the display. 3 Press  . The unit starts playing. MP3 file number After the file name is displayed, the playing time will appear 4 Press VOLUME + or – (or VOL + or – on the remote)  to adjust the volume. Other operation To Press Pause playback  (or  on the unit) . To resume play, press the button again*. Stop playback  . Select a folder + or – . Select a file  or  . Find a point in a file Hold down  or   during playback, and release the button at the desired point. Select Repeat Play REPEAT  on the unit repeatedly until “ ” or “ 1” appears. Remove the USB device Hold down   until “NO DEV” appears, then remove the USB device. * When playing a VBR MP3 file, the unit may resume playback from a different point. To change the play mode Press MODE  repeatedly while the USB device is not playing. You can select Normal Play (“ ” for all files in the folder on the USB device), Shuffle Play (“SHUF” or “ SHUF”), or Program Play (“PGM”). Notes on the USB device  You cannot change the play mode during playback.  Some time may be needed before playback starts when: – the folder structure is complex. – the USB device is close to capacity.  When a USB device is connected, the unit reads all the files on the device. If there are many folders or files on the device, it may take a long time for the unit to finish reading them.  Do not connect a USB device to the unit through a USB hub.  In the case of some USB devices, when an operation is performed on the USB device, there may be a delay before it is carried out on this unit.  This unit may not support all the functions provided on the connected USB device.  Files recorded by this unit are played back in the order of folder creation. Files recorded by a device other than this unit (such as a computer) may not play back in the order in which they were recorded.  The playback order on this unit may differ from the playback order on the connected USB device.  Always hold down   and make sure that “NO DEV” appears before removing the USB device. Removing the USB device while “NO DEV” is not displayed may corrupt the data on the USB device or damage the USB device itself.  Do not save non-MP3 files or unnecessary folders to a USB device that contains MP3 files.  During playback, folders that contain no MP3 files are skipped.  This unit can play only MP3 files that have the “MP3” file extension.  If there are files on the disc that have the “.MP3” file extension, but are not MP3 files, the unit may produce noise or malfunction.  A maximum of 999 MP3 files and 999 folders can be contained on a single USB device. The maximum number of MP3 files and folders may vary, depending on the file and folder structure.  Compatibility with all MP3 encoding/writing software, recording devices, and recording media cannot be guaranteed. If you use an incompatible USB device, the sound skipping or noise may be produced, or the device may not play at all. Recording from a disc to a USB device By connecting a USB device (digital music player or USB storage media) to the  (USB) port  on the unit, you can record music from a disc to the USB device. This unit supports recording from CD-DA and MP3 discs only. Sound from this unit’s cassette player or radio cannot be recorded to a USB device. Audio files are recorded on this unit in the MP3 format. The approximate recording size is about 1 MB per minute of recording time from a CD. The file size may be larger for recordings made from an MP3 disc. See “Playable/Recordable USB devices” on the back page for a list of the USB devices that can be connected to this unit. Synchro Recording This function allows you to easily record an entire disc onto a USB device. See also “Recording a single track or MP3 file to a USB device during playback” on the back page. 1 Connect a USB device with recording capability to the  (USB) port . If a USB cable is necessary, use the USB cable supplied with the device to be connected. Refer to the operation manual supplied with the USB device for connection details. 2 to the wall outlet 1 to AC IN   Connect the AC power cord  or insert six R20 (size D) batteries (not supplied) into the battery compartment . Notes  Replace the batteries when the OPR/BATT  indicator dims or when the unit stops operating. Replace all the batteries with new ones. Before you replace the batteires, be sure to take out the CD from the unit.  To use the unit on batteries, disconnect the AC power cord from the unit.  When you operate the unit on batteries, you cannot turn on the unit using the remote. Preparing the remote Insert two R03 (size AAA) batteries (not supplied). Replacing batteries With normal use, the batteries should last for about six months. When the remote no longer operates the unit, replace all the batteries with new ones. Basic Operations 2 Press CD  and insert the disc that you want to record. 3 When the CD player is stopped, press MODE  repeatedly to select the play mode. The play mode automatically changes to Normal Play if the unit is in Shuffle Play, Repeat Play or Program Play (with no tracks or MP3 files programmed) at the start of recording. For details about play modes, see “To change the play mode” in “Listening to music of a USB device”. 4 Press CD-USB SYNC/REC1  on the unit. “REC” flashes and the display cycles through “CD SYNC”, “FREExxxM”* (free space on the USB device), and “PUSH ENT”. The USB device changes to recording standby and the unit to play pause. * If the amount of free space is in the gigabyte range, “FREExxxG” will be displayed as the unit. 5 Press DISP/ENT/MEMORY  on the unit (or ENTER  on the remote). Recording starts. The unit and the USB device automatically stop when the recording is completed. To stop recording Press  . To remove the USB device 1 Press USB  when the unit is stopped playing. 2 Hold down   on the unit until “NO DEV” appears. 3 Remove the USB device. To erase MP3 files or folders on a USB device You can erase MP3 files or folders that are on a USB device. 1 Connect a USB device with recording capability to the  (USB) port . 2 Press USB  on the unit. 3 Press  or   repeatedly to select the MP3 file or folder that you want to erase. 4 Press ERASE  on the unit. When you erase a track, “TRACK” appears, followed by “ERASE?” When you erase a folder, “FOLDER” appears, followed by “ERASE?” To cancel the erase operation, press  . 5 Press DISP/ENT/MEMORY  on the unit (or ENTER  on the remote). The selected MP3 file or folder is erased. Folder and file generation rules When a recording operation is first performed on a USB device, a “MUSIC” folder is created directly below the “ROOT”. Folders and files are generated within this “MUSIC” folder as follows, according to the recording method. Synchro Recording1) Recording source Folder name File name MP3 Same as the recording source2) CD-DA “FLDR001”3) “TRACK001”4) REC1 recording5) Recording source Folder name File name MP3 “REC1”6) Same as the recording source2) CD-DA “TRACK001”4) 1) In Program Play, the folder name is “FLDRxxx”, and the file name depends on the recording source (CD-DA disc or MP3 disc). For details about play modes, see “To change the play mode” in “Listening to music on a USB device”. 2) Up to 32 characters of the name are assigned. 3) Folder names are assigned in sequential order up to a maximum of 999 (including root and MUSIC). 4) File names are assigned in sequential order. 5) See “Recording a single track or MP3 file to a USB device during playback” on the back page. 6) A new file is recorded to the “REC1” folder each time REC1 recording is performed. Notes  Do not remove the USB device during recording or erase operations. Doing so may corrupt the data on the USB device or damage the USB device itself.  Do not connect a USB device to the unit through a USB hub.  When recording from a CD, the tracks are recorded as MP3 files at 128 kbps. When recording from an MP3 disc, MP3 files are recorded with the same bit rate as the original MP3 files.  While recording from an MP3 disc, no sound is output and “HI- SPEED” appears.  CD text information is not included in the MP3 files.  If you cancel a recording before it is completed, an MP3 file is created with the contents up to the point the recording was stopped.  Recording stops automatically if: – the USB device runs out of space during recording, or – the number of MP3 files on the USB device reaches the limit that the unit can recognize.  A maximum of 999 MP3 files and 999 folders can be contained on a single USB device (including root and MUSIC). The maximum number of MP3 files and folders may vary, depending on the MP3 file and folder structure.  You cannot erase MP3 files and folders in Shuffle Play or Program Play.  If a folder to be erased contains non-MP3 format files or sub folders, these are not erased.  If a folder or file with the same name as the one you are trying to record already exists on the USB device, a sequential number is added after the name for the newly recorded folder or file to avoid overwriting the existing one.  When recording tracks from an MP3 disc to a USB device, there is no sound output. Basic Operations * VOLUME + (VOL + on the remote) ,  ,   and 5  on the remote have a tactile dot. Before using the unit About the operating voltage The unit’s operating voltage is shown on the bottom of the unit. For changing the AM tuning interval, radio frequency range, and AC operation, check the operating voltage of your unit. To turn on/off the power Press OPERATE . To adjust the volume Press VOLUME +, – (VOL +, – on the remote) . To listen through headphones Connect the headphones to the  (headphones) jack . To select the sound characteristic Press SOUND  on the unit repeatedly to select the audio emphasis you want. Choose To get ROCK powerful, clean sounds, emphasizing low and high range audio POP light, bright sounds emphasizing high and middle range audio JAZZ percussive sounds, emphasizing bass audio VOCAL the presence of vocals, stressing middle range audio OFF the whole dynamic range for music such as classical music To reinforce the bass sound Press MEGA BASS  on the unit. “MEGA BASS” appears in the display. To return to normal sound, press the button again. Playing a CD/MP3 disc 1 Press CD  on the unit. (On the remote, press OPERATE  and then press FUNCTION  repeatedly until “CD” appears in the display.) 2 Press  PUSH OPEN/CLOSE  on the unit, and place a disc with the label side up on the CD compartment. To close the CD compartment, press  PUSH OPEN/ CLOSE  on the unit. 3 Press  on the unit ( on the remote) . The unit plays all the tracks/MP3 files once. When you place MP3 discs, “MP3” appears in the display after the unit reads the file information. Notice for the customer in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Notes on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

SERVICE MANUAL Sony Corporation Personal Audio Division Published by Sony Techno Create Corporation E Model CD RADIO CASSETTE-CORDER Ver. 1.0 2007.07 SPECIFICATIONS CFD-RS60CP – Continued on next page – CD Model Name Using Similar Mechanism CFD-S35CP Section CD Mechanism Type KSM-213CDP Optical Pick-up Name KSS-213C TC Model Name Using Similar Mechanism NEW Section Tape Transport Mechanism Type MF-S350V 9-887-803-01 2007G04-1 © 2007.07 CD player section System Compact disc digital audio system Laser diode properties Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Spindle speed 200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels 2 Frequency response 20 - 20 000 Hz +1.8/–0.2 dB Wow and flutter Below measurable limit Radio section Frequency range MX model FM: 87.5 - 108 MHz AM: 530 - 1 710 kHz E41, SP model FM: 87.5 - 108 MHz AM: 531 - 1 611 kHz (9 kHz step) 530 - 1 610 kHz (10 kHz step) Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna Cassette-corder section Recording system 4-track 2 channel stereo Fast winding time Approx. 120 s (sec.) with Sony cassette C-60 Frequency response TYPE I (normal): 80 - 10 000 Hz USB section Supported bit rate MP3 (MPEG 1 Audio Layer-3): 32 - 320 kbps, VBR Sampling frequencies MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz (USB) port USB-A (Full Speed)