HD-SDI: SMPTE 292M compliant
9
Power supply control circuit
13
Disconnecting/Connecting Fine-Wire Coaxial Cable
14
Torque screwdriver’s bit (M3)
16
Adjusting the Arm Lift Angle
18
Set the lift stopper in the upper-limit position.
19
Firmware and PLD Upgrading
20
1-10. Notes on Replacing the Board
21
Replacement of Main Parts
23
Peal the two noise suppression sheets (1).
29
Remove the drop protection rubber and the cushion.
32
SW-1637 Board (HDVF-L770)
34
SW-1638 Board (HDVF-L770)
35
2-10. Arm (R) Sub Assembly (HDVF-L770)
36
Loose the three set screws.
37
Remove the two screws to detach the fulcrum cover.
38
2-11. Arm (L) Sub Assembly (HDVF-L770)
39
2-12. Pan Tilt Base Assembly (HDVF-750)
41
Actions to Be Taken When Replacing the LCD Module
55
Base Pan Tilt Assembly (HDVF-L750)
61
VF Holder Unit-1 (HDVF-L770)
62
VF Holder Unit-2 (HDVF-L770)
63