Sony ICD-PX333 Manuals

Help Guide How to Use Troubleshooting List of Topics IC Recorder ICD-PX333/PX333F Use this Help Guide when you have any questions on how to use your IC recorder. Go to Page Top © 2013 Sony Corporation Search

Creating Your Own Audio Message to microSD 20190405-21.docx © 2016 MegaVoice Ltd. Page 1 of 51 Your message…

IC Recorder Quick Start Guide 4-441-194-51(1) © 2013 Sony Corporation Printed in China ICD-PX333/PX333F � IC Recorder (1) � Stereo headphones (1)* � USB connecting cable (1) � Stereo Microphone with Shirt-Clip (1)* � Carrying pouch (1)* � LR03 (size AAA) alkaline batteries (2) � Application Software, Dragon NaturallySpeaking (DVD-ROM) (1)* � Quick Start Guide (1) � Application Software, Sound Organizer (Installer file stored in the built-in memory so that you can install it to your computer.) � Help Guide (HTML file stored in the built-in memory so it can easily be copied to your computer.) * supplied with some models in some regions. Check the supplied items. � Electret condenser microphone ECM-CS10, ECM-CZ10, ECM-DS70P, ECM-DS30P, ECM-CS3, ECM-TL3 � Rechargeable battery NH-AAA-B2EN, NH-AAA-B2KN � USB AC adaptor AC-UD20, AC-U501AD, AC-U50AG � Compact charger & 2-pc AAA Multi-Use Premium batteries BCG-34HS2KAN, BCG-34HW2KAN Optional accessories Welcome to your new Sony IC recorder! This is the Quick Start Guide, which provides you with instructions on the basic operations of the IC recorder. Please read it carefully. We hope you enjoy using your new Sony IC recorder. Parts and controls ��Built-in microphone ��� (microphone) jack* ��Display window ��DISP/MENU button ��SCENE button �� (folder) button ��������������������������� ��� (stop) button ��–� (review/fast backward), �+ (cue/fast forward) buttons ��Speaker ��� (headphones) jack ��Operation indicator ��ERASE button ��VOL –/+ (volume –/+) button* �� A-B (repeat A-B) button ���REC/PAUSE (record/pause) button ��NOISE CUT switch ��T-MARK (track mark) button �� (USB) connector ��M2™/microSD memory card slot �������������������������� ��Battery compartment ��Strap hole (A strap is not supplied.) * These buttons and the jack have a tactile dot. Use it as a reference point for operations, or to identify each terminal. Let’s try out your new IC recorder Utilizing Your Computer Installing the help guide on your computer By installing the help guide on your computer from the built-in memory of the IC recorder, you can search for detailed operations and possible solutions when a problem occurs. � Connect the (USB) connector of the IC recorder with the USB port of your running computer with the supplied USB connecting cable inserted into the connectors securely until each plug stops to the end. � In Windows: Click [Computer] (or [My Computer]), then double-click [IC RECORDER] � [FOR WINDOWS]. In Mac: Double-click [IC RECORDER] on the desktop. � Install the help guide. In Windows: Double-click [Help_Guide_Installer] (or [Help_Guide_Installer.exe]). In Mac: Double-click [Help_Guide_Installer_for_mac.app]. (v10.5.8 or higher) ������������������������������������������������������������������������������� � After the installation completes, double-click the [Help_Guide_icdp33_uc.htm] (for the customers in the U.S.A. and the Latin American countries] or [Help_Guide_icdp33_ zz.htm] (for customers in other countries) icon in the desktop for Windows (or in Finder for Mac). The help guide is displayed. You can also view the help guide on the following Sony IC Recorder customer support home page: ����������������������������������������������������������������������������������������������� uc/ ���������������������������������������������������������������������� Copying files from the IC recorder to your computer You can copy the files and folders from the IC recorder to your computer to store them. � Connect the IC recorder to your computer. � Copy files or folders you want to transfer to your computer. Drag and drop the files or folders you want to copy from “IC RECORDER” or “MEMORY CARD” to the local disk on your computer. To copy a file or folder (Drag and drop) IC RECORDER or MEMORY CARD Your computer � Click and hold, � drag, � and then drop. � Disconnect the IC recorder from your computer. Installing Sound Organizer Install Sound Organizer on your computer. ��Note Sound Organizer is compatible with the Windows PC only. It is not compatible with Mac. � When installing Sound Organizer, log in to an account with administrator privileges. � Connect the (USB) connector of the IC recorder with the USB port of your running computer with the supplied USB connecting cable inserted into the connectors securely until each plug stops to the end. � Make sure the IC recorder has been recognized properly. While the IC recorder is connected to the computer, “Connecting” is displayed in the display window of the IC recorder. � Go to the [Start] menu, click [Computer] (or [My Computer]), and then double-click [IC RECORDER] � [FOR WINDOWS]. � Double-click [SoundOrganizerInstaller_V140] (or [SoundOrganizerInstaller_V140.exe]). �������������������������������������������������� � Make sure that you accept the terms of the license agreement, select [I accept the terms in the license agreement], and then click [Next]. � When the [Setup Type] window appears, select [Standard] or [Custom], and then click [Next]. ������������������������������������������������������������������������������������������������� � When the [Ready to Install the Program] window appears, click [Install]. The installation starts. � When the [Sound Organizer has been installed successfully.] window appears, check [Launch Sound Organizer Now], and then click [Finish]. ��Note You may need to restart your computer after installing Sound Organizer. ��Note If you format the built-in memory, all data stored there will be erased. (The Help Guide and the Sound Organizer software will also be erased.) On power Operate the IC recorder on 3.0 V or 2.4 V. Use two LR03 (size AAA) alkaline batteries or NH-AAA rechargeable batteries. On safety Do not operate the IC recorder while driving, cycling or operating any motorized vehicle. On handling � Do not leave the IC recorder in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. � Should any solid object or liquid fall into the IC recorder, remove the battery and have the IC recorder checked by qualified personnel before operating it any further. If you have any questions or problems concerning your IC recorder, please consult your nearest Sony dealer. Precautions Owner’s Record The model number is located at the rear panel and the serial number is located inside the battery compartment. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. ________________________________ Serial No. _________________________________ WARNING Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Capacity (User available capacity*1*2) 4 GB (approx. 3.60 GB = 3,865,470,566 Byte) *1 A small amount of the built-in memory is used for file management and therefore not available for user storage. *2 When the built-in memory is formatted with the IC recorder. Dimensions (w/h/d) (not incl. projecting parts and controls) (JEITA)*3 Approx. 37.5 mm × 114.0 mm × 20.9 mm Mass (JEITA)*3 Approx. 74 g including two LR03 alkaline batteries *3 Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association) ����������������������������������������������������������������������������������������������������������������������� ���������������������������������������������� INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of ������������������������������������������������������������������������������������������������������������������������ installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. If you have any questions about this product, you may call: Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/ Declaration of Conformity Trade Name : SONY Model : ICD-PX333 Responsible Party : Sony Electronics Inc. Address : 16530 Via Esprillo, San Diego, CA 92127 USA Telephone Number : 858-942-2230 ������������������������������������������������������������������������������������������������������������������� device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1. Power on. � Slide and lift the battery compartment lid, then insert batteries with the correct polarity. � Turn the power on. ��������������������������������������������������� ��������������������������������������������������� ������������������������������������������������������������ ��������������������������������������������������������������� displayed. To prevent unintentional operations (HOLD) � To release the IC recorder from the HOLD status, slide the �������������������������������������������� 2. Set the date and time. When you insert a battery for the first time, or after the IC recorder has been without a battery for more than 1 minute, “Set Date&Time” appears, and then the clock setting window appears. � Press –� or �+ to set the year (the last two digits of the year), and then press �������������������������� this procedure to set month, day, hour, and minute in sequence. When you set the minute and press ������������������� the clock reflects the setting. ��Note The time is displayed either in 12-Hour with “AM”or “PM,”or in 24-Hour,depending on the “Time Display”setting in the menu. The default setting differs depending on the country or region you purchased the IC recorder. 3. Select the menu language. � Press DISP/MENU. � Press –� or �+ to select “Detail Menu”, and then press ������������������ � Press –� or �+ to select “Language,” and then press ������������������ � Press –� or �+ to select the language that you want to use in the display window, and then press � PLAY/ ����������� You can select the following languages: ������������������������������������������������������� ������������������������������������������������� (Korean), (Chinese), (Chinese), (Thai) � Number of language options you can select and the default setting differ depending on the country or region you purchased your IC recorder. � Press � (stop) to return to the stop mode display. 4. Record. � Before you start using the IC recorder, make sure that you slide the ����������������������������������������������������������� HOLD status. � Press �REC/PAUSE. Recording starts and the operation indicator (�-A) flashes in orange, and then lights in red. � You can pause recording by pressing �REC/PAUSE. Press �REC/ PAUSE again to restart recording. � Place the IC recorder so that the built-in microphone face the direction of the source to be recorded. � Press � (stop) to stop recording. The “Accessing...” animation appears and the recording stops. 5. Listen. � Press ������������������ Playback starts and the operation indicator (�-A) lights in green. � Adjust the volume by pressing VOL –/+. � Press � (stop) to stop playback. 6. Erase. ��Once a file is erased, you cannot restore it. � Press ERASE. “Erase?” is displayed and the file to be erased is played back for confirmation. � Select “YES” using –� or �+, and then press � ���������������� The “Erasing...” animation appears and the selected file is erased. Additional features Details of these additional features for recording, playback, and editing are included in the help guide. � Scene Selection � Noise Cut � T-MARK (Track mark) � DPC (Digital Pitch Control) � A-B Repeat � VOR (Voice Operated Recording) � Alarm � Easy Search � Divide � Sound Organizer editing software ��Note Depending on the country or region, some of the models or optional accessories are not available. GB ES

IC Recorder Quick Start Guide 4-441-194-51(1) © 2013 Sony Corporation Printed in China ICD-PX333/PX333F ˎ ˎ IC Recorder (1) ˎ ˎ Stereo headphones (1)* ˎ ˎ USB connecting cable (1) ˎ ˎ Stereo Microphone with Shirt‑Clip (1)* ˎ ˎ Carrying pouch (1)* ˎ ˎ LR03 (size AAA) alkaline batteries (2) ˎ ˎ Application Software, Dragon NaturallySpeaking (DVD-ROM) (1)* ˎ ˎ Quick Start Guide (1) ˎ ˎ Application Software, Sound Organizer (Installer file stored in the built-in memory so that you can install it to your computer.) ˎ ˎ Help Guide (HTML file stored in the built-in memory so it can easily be copied to your computer.) * supplied with some models in some regions. Check the supplied items. ˎ ˎ Electret condenser microphone ECM‑CS10, ECM-CZ10, ECM‑DS70P, ECM‑DS30P, ECM‑CS3, ECM‑TL3 ˎ ˎ Rechargeable battery NH‑AAA‑B2EN, NH‑AAA‑B2KN ˎ ˎ USB AC adaptor AC‑UD20, AC‑U501AD, AC‑U50AG ˎ ˎ Compact charger & 2‑pc AAA Multi‑Use Premium batteries BCG‑34HS2KAN, BCG‑34HW2KAN Optional accessories Welcome to your new Sony IC recorder! This is the Quick Start Guide, which provides you with instructions on the basic operations of the IC recorder. Please read it carefully. We hope you enjoy using your new Sony IC recorder. Parts and controls  Built-in microphone   (microphone) jack*  Display window  DISP/MENU button  SCENE button  (folder) button   PLAY/STOP•ENTER* button   (stop) button  – (review/fast backward), + (cue/fast forward) buttons  Speaker   (headphones) jack  Operation indicator  ERASE button  VOL –/+ (volume –/+) button*  A-B (repeat A-B) button  REC/PAUSE (record/pause) button  NOISE CUT switch  T-MARK (track mark) button  (USB) connector  M2™/microSD memory card slot  HOLD•POWER ON/OFF switch  Battery compartment  Strap hole (A strap is not supplied.) * These buttons and the jack have a tactile dot. Use it as a reference point for operations, or to identify each terminal. Let’s try out your new IC recorder Utilizing Your Computer Installing the help guide on your computer By installing the help guide on your computer from the built-in memory of the IC recorder, you can search for detailed operations and possible solutions when a problem occurs.  Connect the (USB) connector of the IC recorder with the USB port of your running computer with the supplied USB connecting cable inserted into the connectors securely until each plug stops to the end.  In Windows: Click [Computer] (or [My Computer]), then double-click [IC RECORDER]  [FOR WINDOWS]. In Mac: Double-click [IC RECORDER] on the desktop.  Install the help guide. In Windows: Double-click [Help_Guide_Installer] (or [Help_Guide_Installer.exe]). In Mac: Double-click [Help_Guide_Installer_for_mac.app]. (v10.5.8 or higher) Follow the instructions that appear on the screen to proceed with installation.  After the installation completes, double-click the [Help_Guide_icdp33_uc.htm] (for the customers in the U.S.A. and the Latin American countries] or [Help_Guide_icdp33_ zz.htm] (for customers in other countries) icon in the desktop for Windows (or in Finder for Mac). The help guide is displayed. You can also view the help guide on the following Sony IC Recorder customer support home page: For customers in the U.S.A. and the Latin American countries: http://rd1.sony.net/help/icd/p33/ uc/ For customers in other countries: http://rd1.sony.net/help/icd/p33/zz/ Copying files from the IC recorder to your computer You can copy the files and folders from the IC recorder to your computer to store them.  Connect the IC recorder to your computer.  Copy files or folders you want to transfer to your computer. Drag and drop the files or folders you want to copy from “IC RECORDER” or “MEMORY CARD” to the local disk on your computer. To copy a file or folder (Drag and drop) IC RECORDER or MEMORY CARD Your computer  Click and hold,  drag,  and then drop.  Disconnect the IC recorder from your computer. Installing Sound Organizer Install Sound Organizer on your computer.  Note Sound Organizer is compatible with the Windows PC only. It is not compatible with Mac. ¼ ¼ When installing Sound Organizer, log in to an account with administrator privileges.  Connect the (USB) connector of the IC recorder with the USB port of your running computer with the supplied USB connecting cable inserted into the connectors securely until each plug stops to the end.  Make sure the IC recorder has been recognized properly. While the IC recorder is connected to the computer, “Connecting” is displayed in the display window of the IC recorder.  Go to the [Start] menu, click [Computer] (or [My Computer]), and then double-click [IC RECORDER]  [FOR WINDOWS].  Double-click [SoundOrganizerInstaller_V140] (or [SoundOrganizerInstaller_V140.exe]). Follow the instructions that appear on the screen.  Make sure that you accept the terms of the license agreement, select [I accept the terms in the license agreement], and then click [Next].  When the [Setup Type] window appears, select [Standard] or [Custom], and then click [Next]. Follow the instructions on the screen and set the installation settings when you select [Custom].  When the [Ready to Install the Program] window appears, click [Install]. The installation starts.  When the [Sound Organizer has been installed successfully.] window appears, check [Launch Sound Organizer Now], and then click [Finish].  Note You may need to restart your computer after installing Sound Organizer.  Note If you format the built-in memory, all data stored there will be erased. (The Help Guide and the Sound Organizer software will also be erased.) On power Operate the IC recorder on 3.0 V or 2.4 V. Use two LR03 (size AAA) alkaline batteries or NH‑AAA rechargeable batteries. On safety Do not operate the IC recorder while driving, cycling or operating any motorized vehicle. On handling ˎ ˎ Do not leave the IC recorder in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. ˎ ˎ Should any solid object or liquid fall into the IC recorder, remove the battery and have the IC recorder checked by qualified personnel before operating it any further. If you have any questions or problems concerning your IC recorder, please consult your nearest Sony dealer. Precautions Owner’s Record The model number is located at the rear panel and the serial number is located inside the battery compartment. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. _________________________________ Serial No. __________________________________ WARNING Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Capacity (User available capacity*1*2) 4 GB (approx. 3.60 GB = 3,865,470,566 Byte) *1 A small amount of the built-in memory is used for file management and therefore not available for user storage. *2 When the built-in memory is formatted with the IC recorder. Dimensions (w/h/d) (not incl. projecting parts and controls) (JEITA)*3 Approx. 37.5 mm × 114.0 mm × 20.9 mm Mass (JEITA)*3 Approx. 74 g including two LR03 alkaline batteries *3 Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association) The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. If you have any questions about this product, you may call: Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/ Declaration of Conformity Trade Name : SONY Model : ICD-PX333 Responsible Party : Sony Electronics Inc. Address : 16530 Via Esprillo, San Diego, CA 92127 USA Telephone Number : 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1. Power on.  Slide and lift the battery compartment lid, then insert batteries with the correct polarity.  Turn the power on. Slide and hold the HOLD•POWER ON/OFF switch in the direction of “POWER ON/OFF” for more than 1 second. To turn the power off, slide and hold the HOLD•POWER ON/OFF switch in the direction of “POWER ON/OFF” until “Power Off” is displayed. To prevent unintentional operations (HOLD) ¼ ¼ To release the IC recorder from the HOLD status, slide the HOLD•POWER ON/OFF switch towards the center. 2. Set the date and time. When you insert a battery for the first time, or after the IC recorder has been without a battery for more than 1 minute, “Set Date&Time” appears, and then the clock setting window appears.  Press – or + to set the year (the last two digits of the year), and then press  PLAY/STOP•ENTER. Repeat this procedure to set month, day, hour, and minute in sequence. When you set the minute and press  PLAY/STOP•ENTER, the clock reflects the setting.  Note The time is displayed either in 12‑Hour with “AM”or “PM,”or in 24-Hour,depending on the “Time Display”setting in the menu. The default setting differs depending on the country or region you purchased the IC recorder. 3. Select the menu language.  Press DISP/MENU.  Press – or + to select “Detail Menu”, and then press  PLAY/STOP•ENTER.  Press – or + to select “Language,” and then press  PLAY/STOP•ENTER.  Press – or + to select the language that you want to use in the display window, and then press  PLAY/ STOP•ENTER. You can select the following languages: Deutsch (German), English, Español (Spanish), Français (French), Italiano (Italian), Русский (Russian), (Korean), (Chinese), (Chinese), (Thai) ¼ ¼ Number of language options you can select and the default setting differ depending on the country or region you purchased your IC recorder.  Press  (stop) to return to the stop mode display. 4. Record. ¼ ¼ Before you start using the IC recorder, make sure that you slide the HOLD•POWER ON/OFF switch towards the center to release the HOLD status.  Press REC/PAUSE. Recording starts and the operation indicator (-A) flashes in orange, and then lights in red. ¼ ¼ You can pause recording by pressing REC/PAUSE. Press REC/ PAUSE again to restart recording.  Place the IC recorder so that the built-in microphone face the direction of the source to be recorded.  Press  (stop) to stop recording. The “Accessing...” animation appears and the recording stops. 5. Listen.  Press  PLAY/STOP•ENTER. Playback starts and the operation indicator (-A) lights in green.  Adjust the volume by pressing VOL –/+.  Press  (stop) to stop playback. 6. Erase.  Once a file is erased, you cannot restore it.  Press ERASE. “Erase?” is displayed and the file to be erased is played back for confirmation.  Select “YES” using – or +, and then press  PLAY/STOP•ENTER. The “Erasing...” animation appears and the selected file is erased. Additional features Details of these additional features for recording, playback, and editing are included in the help guide. ˎ ˎ Scene Selection ˎ ˎ Noise Cut ˎ ˎ T-MARK (Track mark) ˎ ˎ DPC (Digital Pitch Control) ˎ ˎ A‑B Repeat ˎ ˎ VOR (Voice Operated Recording) ˎ ˎ Alarm ˎ ˎ Easy Search ˎ ˎ Divide ˎ ˎ Sound Organizer editing software  Note Depending on the country or region, some of the models or optional accessories are not available. GB ES

IC Recorder Quick Start Guide 4-449-566-61(1) © 2013 Sony Corporation Printed in China ICD-PX333 ˎ ˎ IC Recorder (1) ˎ ˎ USB connecting cable (1) ˎ ˎ Stereo Microphone with Shirt‑Clip (1)* ˎ ˎ LR03 (size AAA) alkaline batteries (2) ˎ ˎ Application Software, Dragon NaturallySpeaking (DVD-ROM) (1)* ˎ ˎ Quick Start Guide ˎ ˎ Application Software, Sound Organizer (Installer file stored in the built-in memory so that you can install it to your computer.) ˎ ˎ Help Guide (HTML file stored in the built-in memory so it can easily be copied to your computer.) * supplied with some models in some regions. Check the supplied items. ˎ ˎ Electret condenser microphone ECM‑CS10, ECM-CZ10, ECM‑DS30P, ECM‑CS3 ˎ ˎ Rechargeable battery NH‑AAA‑B2EN, NH‑AAA‑B2KN ˎ ˎ USB AC adaptor AC‑U50AG ˎ ˎ Compact charger & 2‑pc AAA Multi‑Use Premium batteries BCG‑34HS2KAN, BCG‑34HW2KAN Optional accessories Welcome to your new Sony IC recorder! This is the Quick Start Guide, which provides you with instructions on the basic operations of the IC recorder. Please read it carefully. We hope you enjoy using your new Sony IC recorder.  Note Depending on the country or region, some of the models or optional accessories are not available. On power Operate the IC recorder on 3.0 V or 2.4 V. Use two LR03 (size AAA) alkaline batteries or NH‑AAA rechargeable batteries. On safety Do not operate the IC recorder while driving, cycling or operating any motorized vehicle. On handling ˎ ˎ Do not leave the IC recorder in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. ˎ ˎ Should any solid object or liquid fall into the IC recorder, remove the battery and have the IC recorder checked by qualified personnel before operating it any further. If you have any questions or problems concerning your IC re corder, please consult your nearest Sony dealer. Precautions Capacity (User available capacity*1*2) 4 GB (approx. 3.60 GB = 3,865,470,566 Byte) *1 A small amount of the built-in memory is used for file management and therefore not available for user storage. *2 When the built-in memory is formatted with the IC recorder. Dimensions (w/h/d) (not incl. projecting parts and controls) (JEITA)*3 Approx. 37.5 mm × 114.0 mm × 20.9 mm Mass (JEITA)*3 Approx. 74 g including two LR03 alkaline batteries *3 Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association) Let’s try out your new IC recorder Utilizing Your Computer WARNING Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. To prevent possible hearing damage, do not listen at high volume levels for long periods. Notice for the customers: the following information is only applicable to equipment sold in the countries applying EU directives This product has been manufactured by or on behalf of Sony Corporation, 1‑7‑1 Konan Minato‑ku Tokyo, 108‑0075 Japan. Inquiries related to product compliance based on European Union legislation shall be addressed to the authorized representative, Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses provided in the separate service or guarantee documents. Caution Battery 1. Power on.   Slide and lift the battery compartment lid, then insert batteries with the correct polarity.  Turn the power on. To prevent unintentional operations (HOLD) 2. Set the date and time.  Press – or + to set the year (the last two digits of the year), and then press  PLAY/STOP•ENTER. Repeat this procedure to set month, day, hour, and minute in sequence. 3. Select the menu language.  Press DISP/MENU.  Press – or + to select “Detail Menu”, and then press  PLAY/STOP•ENTER.  Press – or + to select “Language,” and then press  PLAY/STOP•ENTER.  Press – or + to select the language that you want to use in the display window, and then press  PLAY/ STOP•ENTER.  Press  (stop) to return to the stop mode display. 4. Record. ¼ ¼ Before you start using the IC recorder, make sure that you slide the HOLD•POWER ON/OFF switch towards the center to release the HOLD status.  Press REC/PAUSE. Recording starts and the operation indicator (-A) flashes in orange, and then lights in red. ¼ ¼ You can pause recording by pressing REC/PAUSE. Press REC/PAUSE again to restart recording.  Place the IC recorder so that the built-in microphone face the direction of the source to be recorded.  Press  (stop) to stop recording. The “Accessing...” animation appears and the recording stops. 5. Listen.  Press  PLAY/STOP•ENTER. Playback starts and the operation indicator (-A) lights in green.  Adjust the volume by pressing VOL –/+.  Press  (stop) to stop playback. 6. Erase.  Once a file is erased, you cannot restore it.  Press ERASE. “Erase?” is displayed and the file to be erased is played back for confirmation.  Select “YES” using – or +, and then press  PLAY/STOP•ENTER. The “Erasing...” animation appears and the selected file is erased. Installing the help guide on your computer By installing the help guide on your computer from the built-in memory of the IC recorder, you can search for detailed operations and possible solutions when a problem occurs.  Connect the (USB) connector of the IC recorder with the USB port of your running computer with the supplied USB connecting cable inserted into the connectors securely until each plug stops to the end.  In Windows: Click [Computer] (or [My Computer]), then double-click [IC RECORDER]  [FOR WINDOWS]. In Mac: Double-click [IC RECORDER] on the desktop.  Install the help guide. In Windows: Double-click [Help_Guide_Installer] (or [Help_Guide_Installer.exe]). In Mac: Double-click [Help_Guide_Installer_for_mac.app]. (v10.5.8 or higher) Follow the instructions that appear on the screen to proceed with installation.  After the installation completes, double-click the [icdp33_ce_HelpGuide] icon in the desktop for Windows (or in Finder for Mac). The help guide is displayed. You can also view the help guide on the following Sony IC Recorder customer support home page: http://rd1.sony.net/help/icd/p33/ce/ You can select the following languages: English, French, German, Spanish, Dutch, Italian, Portuguese, Swedish, Hungarian, Czech, Turkish, Polish, Greek, Russian, Ukrainian. Copying files from the IC recorder to your computer You can copy the files and folders from the IC recorder to your computer to store them.  Connect the IC recorder to your computer.  Copy files or folders you want to transfer to your computer. Drag and drop the files or folders you want to copy from “IC RECORDER” or “MEMORY CARD” to the local disk on your computer. To copy a file or folder (Drag and drop) IC RECORDER or MEMORY CARD Your computer  Click and hold,  drag,  and then drop.  Disconnect the IC recorder from your computer. Installing Sound Organizer Install Sound Organizer on your computer.  Note Sound Organizer is compatible with the Windows PC only. It is not compatible with Mac. ¼ ¼ When installing Sound Organizer, log in to an account with administrator privileges.  Connect the (USB) connector of the IC recorder with the USB port of your running computer with the supplied USB connecting cable inserted into the connectors securely until each plug stops to the end.  Make sure the IC recorder has been recognized properly. While the IC recorder is connected to the computer, “Connecting” is displayed in the display window of the IC recorder.  Go to the [Start] menu, click [Computer] (or [My Computer]), and then double-click [IC RECORDER]  [FOR WINDOWS].  Double-click [SoundOrganizerInstaller_V140] (or [SoundOrganizerInstaller_V140.exe]). Follow the instructions that appear on the screen.  Make sure that you accept the terms of the license agreement, select [I accept the terms in the license agreement], and then click [Next].  When the [Setup Type] window appears, select [Standard] or [Custom], and then click [Next]. Follow the instructions on the screen and set the installation settings when you select [Custom].  When the [Ready to Install the Program] window appears, click [Install]. The installation starts.  When the [Sound Organizer has been installed successfully.] window appears, check [Launch Sound Organizer Now], and then click [Finish].  Note You may need to restart your computer after installing Sound Organizer.  Note If you format the built-in memory, all data stored there will be erased. (The Help Guide and the Sound Organizer software will also be erased.) GB ES

Recording is easy with the PC compatible ICD-PX333 digital voice recorder. With Voice Operated Recording, it starts and stops automatically with your voice. Over 1000 hours of recording time plus Micro SD expansion slot for more time, you’ll never miss a class or those random thoughts or ideas. All around recording Introducing the ideal digital voice recorder for business, school, and personal recording, delivering Sony’s legendary ease of use with superior recording and audio playback capability. Built-in 4 GB flash memory1 4 GB of available internal flash memory provides ample space for recording life’s important moments-up to 1,073 hours in fact.1 Mono Microphone Capture thoughts, dictations and other details with great clarity via the built-in microphone. Via an external microphone (available separately). stereo recordings can also be made when necessary. Memory Card Expansion Slot A built-in Memory Card Expansion Slot (microSD/M2) allows for additional recording time via removable flash memory. It can also be used to transfer recordings to a computer. Scene Select Select a pre-determined recording mode with the push of a button. Automatically the unit will optimize the settings for recording notes, lectures, music etc. Intelligent Noise Cut Intelligent Noise Cut, a unique and innovative technology from Sony, significantly reduces ambient noise during recording for clearer playback. A-B Repeat Mark the beginning and ending of a particular recorded passage for repeated playback over and over again-perfect for language learning. Track Mark Finding an exact spot in your recording is a snap. Place up to 98 track marks in each recorded file which can be "jumped" to for playback. Add/Overwrite Did you forget a thought or mis-speak? With Add/Overwrite capability, adding to or overwriting recordings during playback is quick and easy. PC and Mac® compatibility Transfer files quickly and easily with the supplied USB cable. Works with Windows® as well as Macintosh® computers.3 Battery Operated Two AAA batteries (included) will deliver up to 96 hours of recording time so you will never miss a beat.2 Specifications Audio ICD-PX333 Digital Flash Voice Recorder