Sony MDR-EX86LP Manuals

Stereo Headphones MDR-EX86LP 4-209-718-11(1) Operating Instructions Manual de instrucciones English Stereo headphones Features  13.5 mm dynamic type driver units reproduce vocal and instrumental sound with vivid clarity  Reproduction of precision monitor quality by adapting the new structural arrangement of 13.5 mm driver units while maintaining excellent wearing comfort  Convenient cord adjuster supplied  Hybrid silicone rubber earbuds (S, M, L) supplied for secure fitting and long-term wearing comfort (see fig. )  Convenient carrying pouch supplied How to use Wearing the headphones (see fig. ) 1 Determine right and left headphone and hold them as in the illustration. 2 Insert the left headphone from behind your left ear, as in the illustration. Be sure to wear it completely inside the ear canal. 3 Adjust the earbud to fit snugly in your ear. Follow the same procedure for the right side. How to use the supplied cord adjuster (see fig. ) You can adjust the cord length by winding the cord on the cord adjuster. (The cord can be wound to the cord adjuster up to 50 cm (19 3/4 in). If you wind more, the cord comes off from the cord adjuster easily.) 1 Wind the cord. 2 Push cord into slot hole to secure in place. Note Do not wind the plug or split section of the cord, as it will strain the cord and may cause a wire break. How to install the earbuds correctly (see fig. ) If the earbuds do not fit your ears correctly, low-bass sound may not be heard. To enjoy better sound quality, change the earbuds to another size, or adjust the earbuds position to sit on your ears comfortably and fit your ears snugly. If the earbuds do not fit your ears, try another size. Confirm the size of the earbuds by checking color inside (see fig. -). When you change the earbuds, turn to install them firmly on the headphones to prevent the earbud from detaching and remaining in your ear. Earbud sizes (inside color) Small  Large  SS* (Red) S (Orange) M (Green) L (Light blue) * This size is optional and available at purchase. To detach an earbud (see fig. -) While holding the headphone, twist and pull the earbud off.  Tip If the earbud slips and cannot be detached, wrap it in a dry soft cloth. To attach an earbud (see fig. -) Push the parts inside of the earbud into the headphone until the projecting part of the headphone is fully covered. Cleaning the earbuds Remove the earbuds from the headphones, and wash them with a mild detergent solution. How to carry the headphones (see fig. ) 1 Place the headphones in the inner case. 2 Wind the cord around the side of the inner case and then put the inner case in the carrying case. Specifications Type: Closed, dynamic Driver unit: 13.5 mm (CCAW adopted), dome type Power handling capacity: 100 mW (IEC*) Impedance: 16 Ω at 1 kHz Sensitivity: 105 dB/mW Frequency response: 5 – 24,000 Hz Cord: Approx. 1.2 m (47 1/4 in), OFC litz cord Mass: Approx. 6 g (0.21 oz) without cord Plug: Gold-plated L-shaped stereo mini plug Supplied accessories Earbuds (S (2), M (2), L (2)) Carrying case (1) Inner case (1) Cord adjuster (1) Operating Instructions (1) * IEC = International Electrotechnical Commission Design and specifications are subject to change without notice. Precautions  Please keep your headphones clean at all times especially inside the rubber earbud (see fig. ). If any dust or ear wax is inside the earbud, you may experience some listening difficulties.  Listening with headphones at high volume may affect your hearing. For traffic safety, do not use while driving or cycling.  Do not put weight or pressure on the headphones as it may cause the headphones to deform during long storage.  The earbuds may deteriorate due to long-term storage or use.  Install the earbuds firmly onto the headphones. If an earbud accidentally detaches and is left in your ear, it may cause injury. Note on static electricity In particularly dry air conditions, mild tingling may be felt on your ears. This is a result of static electricity accumulated in the body, and not a malfunction of the headphones. The effect can be minimized by wearing clothes made from natural materials. EP-EX10A is available (sold separately) as optional replacement earbuds. EP-EX10A offers 4 types of the earbuds: SS, S, M and L. ©2010 Sony Corporation Printed in Thailand  Cross-section of earbud Low-density silicone High- density silicone  2 3 1 Earbud  1 2   Sectional View Colored parts   1 2 

Sleek, ergonomic design makes these earbuds a pleasure to wear. Sony® EX Monitor earbuds boast a sleek, lightweight design and 13.5 mm driver units for deep bass sound and a superior listening experience. The hybrid silicone earbuds ensure a perfect fit and superior listening experience. Advanced Design Slim, light weight, angled design for improved comfort and fit. 13.5 mm Driver Unit Deep, full bass performance in a compact package. Interchangeable Ear Pads Pick the size that maximizes comfort and sound performance for you. Adjustable Cord Conveniently control the cord length depending on where you are. Specifications ©2010 Sony Electronics Inc. All rights reserved. Sony is a trademark of Sony. All other trademarks are property of their respective owners. Features and specifications are subject to change without notice. Non-metric weights and measures are approximate and may vary. /Updated: February 3, 2012 Audio Driver Unit Closed, dynamic 13.5 mm diameter, (CCAW adopted) dome type Frequency Response 5-24,000 Hz Impedance 16 ohms at 1 kHz Sensitivity (db) 105 dB/mW General Design Earbud Diaphragm PET Magnet Neodymium Plug L shaped stereo mini plug (Gold) Hardware Cord OFC Litz cord neckchain Power Power Handling Capacity 100 mW (IEC) Weights and Measurements Weight (Approx.) 0.21oz (6 g) without cord Accessories Supplied Accessories Earbuds (S x 2, M x 2, L x 2)) Carrying case (1) Inner case (1) Cord adjuster (1) Operating instructions (1) MDR-EX86LP/BLK Bud Style Headphone