Sony PCG-FRV Manuals

PCG-FRV Series CD/DVD Drive Replacement Instructions P/N T99860134 Rev. C 1/2 Step 1. Power on the PC, eject the CD/DVD drive tray by pressing the button on the drive door. Next, properly turn off the PC, leaving the tray ejected. Step 2. Close the screen. Place your computer upside down on a protected surface with the back edge facing toward you. Step 3. CAUTION! Disconnect the power cord and remove the battery. Failure to do so can result in damage to the PC. These easy instructions are intended to guide you through the replacement process. 9 To avoid electric shock please make sure product is turned off and AC Adaptor is disconnected from the power source. Remove jewelry before you begin work to avoid scratching the surface of your notebook computer.* 9 Place your notebook computer on a clean, stable and covered surface to avoid damage to the computer's case.* 9 Follow the ESD (Electrostatic Discharge) damage prevention instructions: o Hold parts by the edges, away from exposed circuitry when possible. o Do not walk around excessively as this promotes static build-up. 9 The appearance of the electronic components shown in the illustrations may be different from the components shipped. This slight difference does not affect the accuracy of these instructions. * Sony is not responsible for any loss of data associated with your computer or any damage caused by incorrect handling of the computer under these procedures. The terms of your Sony Limited Warranty continue to apply. IMPORTANT! PLEASE READ BEFORE YOU START