Sony TDM-iP10 Manuals

US FR ES ©2007 Sony Corporation 3-277-605-11(1) Operating Instructions Mode d’emploi Manual de instrucciones DIGITAL MEDIA PORT Adapter TDM-iP10

TDM-iP10 (M) © 2008 Sony Corporation Printed in China Operating Instructions 3-876-237-12(1) DIGITAL MEDIA PORT Adapter WARNING Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. On copyrights  iPod is a trademark of Apple Inc., registered in the U.S. and other countries.  All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and ® marks are not specified. List of parts locations  DIGITAL MEDIA PORT cable  iPod connector  Power indicator: Lights up in green while the power is supplied. To connect/disconnect the unit To DMPORT jack Connect the cable so that both  marks are aligned. To remove the DIGITAL MEDIA PORT cable from the DMPORT jack, press both side buttons. Connecting 1 Connect the DIGITAL MEDIA PORT cable of this unit to the DMPORT jack of an AV system. Make sure the AV system is turned off before connecting. 2 Turn on the AV system with a DMPORT jack connected to this unit, and select the DMPORT function. Disconnecting Before disconnecting, turn off the AV system. To put the iPod into the unit’s connector 1 Choose the iPod Dock Adapter that fits your iPod. 2 Insert the Dock Adapter into the unit. 3 Put the iPod into the unit’s connector. Notes  When placing or removing the iPod, handle the iPod in the same angle as that of the iPod connector on this unit and do not twist or sway the iPod to prevent connector damage.  Do not carry the unit with an iPod set on the connector. Doing so may cause a malfunction.  When placing or removing the iPod, brace the unit with one hand and take care not to press the controls of the iPod by mistake. To use the unit as a battery charger You can use the unit as a battery charger. While the POWER indicator lights up, the battery is charging. The charging status appears in the iPod display. For details, see the user’s guide of your iPod. To remove the iPod Dock Adapter To remove the iPod Dock Adapter, pull it up with your fingernail or a flat object using the slot inside the adapter. Getting Started