Sophos SG 105(w) Manuals

ø3.5 16 2.3 ø6.3 22.2 1.0 ø8 ø4 United Kingdom and Worldwide Sales Tel: +44 (0)8447 671131 Email: [email protected] North American Sales Toll Free: 1-866-866-2802 Email: [email protected] Australia and New Zealand Sales Tel: +61 2 9409 9100 Email: [email protected] Asia Sales Tel: +65 62244168 Email: [email protected] © Copyright 2018. Sophos Ltd. All rights reserved. Sophos is the registered trademark of Sophos Ltd. 18-03-03 (2965-DD) Rackmount Kit Mounting Instructions SG 105(w)/115(w) Rev. 3 Please note This Rackmount kit can only be used with SG 105(w)/115(w) rev.3 models. What is included in the box 6 flat head M3 screws In addition to the rack mounting kit contents, you will need a long-handed Phillips-head screwdriver. 1. Remove existing screws from the chassis Remove the three screws from each side of the chassis. 2. Install the Rackmounting Kit Device Holder to the Chassis Please note You can mount the unit either with the front or with the back side facing to you (see figures below). Secure one device holder to each side of the appliance using three flat head M3 screws from the scope of supply. LEDs Ports 1. 2a. Front facing installation 2b. Back facing installation 3b. Wallmount installation 3a. Rackmount installation 2 device holders (left, right) The device holders must only be fixed to the appliance by means of the supplied screws. Screws with other dimensions might damage the appliance. 3. Install the unit You can either install the unit into a rack (3a) or you can hang the unit to a wall (3b). Please use appropriate screws (not supplied with this kit) for this purpose. For wallmount installation we recommend using wall plugs and screws with dimensions shown below (3c). 3c.

Rackmount Kit Mounting Instructions SG 105(w)/115(w) Rev. 3, SD-RED 60 Please note This Rackmount kit can only be used with SG 105(w)/115(w) rev.3 and SD-RED 60 models. What is included in the box 1. Remove existing screws from the chassis Remove the three screws from each side of the chassis. 2. Install the Rackmounting Kit Device Holder to the Chassis Please note You can mount the unit into a rack either with the front or with the back side facing to you (see figures below). Secure one device holder to each side of the appliance using three of the screws included with the box. LEDs Ports 1. 3. 4a. 4b. 2a. Front facing installation 2b. Back facing installation 3. Install the Adapter Bracket Attach the power adapter bracket either to the left or right side of the rack mounting kit by using four of the supplied screws. If you are using redundant power supplies fix the second adapter bracket on the other side. 4. Install the Power Adapter Place the adapter(s) on the bracket(s). For SG 105/115 models place one of the supplied PADs on top of each power adapter (4a) and secure the position of the adapter with one of the supplied bevels by using two screws. For SD-RED 60 models a PAD is not required (4b). 5. Install the unit You can either install the unit into a rack (5a) or you can hang the unit to a wall (5b). Please use appropriate screws (not supplied with this kit) for this purpose. For wallmount installation we recommend using wall plugs and screws with dimensions shown below (5c). ø3.5 16 2.3 ø6.3 22.2 1.0 ø8 ø4 5b. Wallmount installation 5a. Rackmount installation 5c. United Kingdom and Worldwide Sales Tel: +44 (0)8447 671131 Email: [email protected] North American Sales Toll Free: 1-866-866-2802 Email: [email protected] Australia and New Zealand Sales Tel: +61 2 9409 9100 Email: [email protected] Asia Sales Tel: +65 62244168 Email: [email protected] © Copyright 2018. Sophos Ltd. All rights reserved. Sophos is the registered trademark of Sophos Ltd. 19-08-13 (PC) • 2 device holders (left, right) • 2 bevels • 2 adapter brackets • 2 PADs (for use with SG Power adapters) • 18 flat head M3 screws In addition to the rack mounting kit contents, you will need a long-handed Phillips-head screwdriver

Quick Start Guide SG 105(w)/115(w)/125(w)/135(w) Rev. 3

Quick Start Guide SG 105w/115w/125w/135w

ø3.5 16 2.3 ø6.3 22.2 1.0 ø8 ø4 United Kingdom and Worldwide Sales Tel: +44 (0)8447 671131 Email: [email protected] North American Sales Toll Free: 1-866-866-2802 Email: [email protected] Australia and New Zealand Sales Tel: +61 2 9409 9100 Email: [email protected] Asia Sales Tel: +65 62244168 Email: [email protected] Rackmount Kit Mounting Instructions SG 125(w)/135(w) Rev. 3 Please note This Rackmount kit can only be used with SG 125(w)/135(w) rev.3 models. What is included in the box 6 flat head M3 screws In addition to the rack mounting kit contents, you will need a long-handed Phillips-head screwdriver. 1. Remove existing screws from the chassis Remove the three screws from each side of the chassis. 2. Install the Rackmounting Kit Device Holder to the Chassis Please note You can mount the unit either with the front or with the back side facing to you (see figures below). Secure one device holder to each side of the appliance using three flat head M3 screws from the scope of supply. LEDs Ports 1. 2a. Front facing installation 2b. Back facing installation 3b. Wallmount installation 3a. Rackmount installation The device holders must only be fixed to the appliance by means of the supplied screws. Screws with other dimensions might damage the appliance. 3. Install the unit You can either install the unit into a rack (3a) or you can hang the unit to a wall (3b). Please use appropriate screws (not supplied with this kit) for this purpose. For wallmount installation we recommend using wall plugs and screws with dimensions shown below (3c). 3c. 2 device holders (left, right) © Copyright 2018. Sophos Ltd. All rights reserved. Sophos is the registered trademark of Sophos Ltd. 18-03-03 (2965-DD)

Scope of supply Step 2: Install the Power Adapter Step 1: Install the Rackmounting Kit Device Holder to the Chassis Step 3: Mount the Power Adapter to the Device Holder In addition to the rack mounting kit contents, you will need a long-handed Phillips-head screwdriver. • 2 device holders (left, right) • 1 bevel • 1 adapter bracket • 6 flat head M3 screws • 6 round head M3 screws Place the adapter on the bracket. Draw attention to the direction of the power outlet of the adapter. Secure the position of the adapter with the supplied bevel by using two round head screws from the scope of supply. Attach the power adapter bracket either to the left or right side of the rack mounting kit by using four round head screws from the scope of supply. United Kingdom Sales: Tel: +44 (0)8447 671131 Email: [email protected] North American Sales: Toll Free: 1-866-866-2802 Email: [email protected] Australia & New Zealand Sales Tel: +61 2 9409 9100 Email: [email protected] Boston, USA | Oxford, UK © Copyright 2014. Sophos Ltd. All rights reserved. All trademarks are the property of their respective owners. 9.14.GH.simple This Rackmount kit can only be used with SG 125/135 and SG 125w/135w appliances. Rackmount Kit Mounting Instructions SG 125/135 Secure the device holders to the appliance using three flat head M3 screws from the scope of supply on both sides. The device holders must only be fixed to the appliance by means of the supplied screws. Screws with other dimensions might damage the appliance!