Southbend KSLG-20 Manuals

southbend A MIDDLEBY COMPANY OWNER'S MANUAL INSTALLATION USER'S GUIDE SERVICE PARTS STATIONARY GAS — SELF CONTAINED STEAM KETTLES KSLG-20, KSLG-20E KSLG-40, KSLG-40E MODELS: KSLG-60, KSLG-60E These instructions should be read thoroughly before attempting installation. Set up, installation and Performance Check should be performed by a qualified service technician. The Manufacturer, Southbend (1100 Old Honeycutt Rd., Fuquay-Varina, North Carolina 27526), informs you that unless the installation instructions for the above described Southbend product are followed and performed by a qualified service technician, (a person experienced in and knowledgeable concerning the installation of commercial gas and/or electrical cooking equipment) then the terms and conditions of the Manufacturer's Limited Warranty will be rendered void and no warranty of any kind shall apply. If the equipment has been changed, altered, modified or repaired by other than a qualified service technician during or after the 12-month limited warranty period, then the manufacturer shall not be liable for any incidental or consequential damages to any person or to any property which may result from the use of the equipment thereafter. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion thereto may not apply to you. In the event you have any question concerning the installation, use, care, or service of the product, write Customer Service Department, Southbend Corporation, 1100 Old Honeycutt Rd., Fuquay-Varina, North Carolina 27526. STATIONARY GAS SELF CONTAINED STEAM KETTLE (Manual Section SK)

Job Item# www.yatesgd.com www.yatesgraphicdesign.com Form KSLG Rev 1 (November/2010) Gas Stationary Steam Kettle SPECIFICATIONS: Shall be a Southbend Model _____________________________, gas fired, self-contained steam jacketed kettle, AGA and CGA design certified, NSF approved. The unit comes standard with electronic ignition and a hinged stainless steel cover. The 60 gallon kettle comes standard with a spring assisted cover. The kettle shall be constructed with an exterior of type 304 stainless steel, #4 sanitary finish and 6” (152mm) stainless steel adjustable legs. The interior kettle liner shall be a one piece welded construction made with type 316 stainless steel for 20 and 40 gallon kettles and type 304 stainless for 60 gallon kettles with #4 sanitary finish, 2/3 jacketed and shall be furnished with a 2” (50 mm) tangent draw off valve as standard. The recessed control panel shall be located on the front side of the unit in full view of the operator and easy to use. Standard controls include a direct immersion thermostat, water sight glass, cooking light, pressure gauge and low water indicator light. Safety features shall include a low water cut off, pressure relief valve, pressure switch and a 100% safety gas shutoff valve. OPERATION SHALL BE BY:  Natural Gas  L.P. Gas For operation on 115 VAC, 1 phase 50/60 Hz, A.S.M.E. code stamped for operation up to 50 psi (345kPa). The steam kettle temperature ranges shall be between 165°F to 275°F (74°C to 135°). Burners shall be serviceable, high efficiency stainless steel with no shutter adjustment. OPTIONAL ITEMS AT EXTRA COST:  220 VAC, 1 phase, 50/60 Hz.  316 stainless steel liner for interior (for KSLG-60)  3” (76 mm) draw-off valve (TVT-3)  2” (50 mm) dairy valve (DDO-2T)  3” (76 mm) dairy valve (DDO-3T)  Etched gallon markings (GM-)  Etched liter markings (LM-)  Spring assist for 20 + 40 gallon (SA-)  Casters  Correctional Package ACCESSORIES:  Stainless steel tri basket, (TBA-1)  Graduated measuring strip (CMS-)  Strainer hook (SH-)  Perforated strainer for draw-off valve (TPS-)  Solid disc for draw-off valve (TSS-)  Single pantry faucet with swing spout, SF-12  Double pantry faucet with swing spout, DF-12 Model Capacity KSLG-20 20 Gallon 76 Liter KSLG-40 40 Gallon 152 Liter KSLG-60 60 Gallon 227 Liter