Southwire 10030S Manuals

1 pdf manual(s) Southwire 10030S for free download (Document Types: Operating instructions manual)

Southwire 10030S Operating instructions manual [PDF] (15 pages)

  • Identifier: id-2266185
  • Brand: Southwire
  • Device: 10030S Multimeter
  • Type: PDF
  • Key Aspects: Environmental Factors and Restrictions, Warranty and Service Information, Error Code Explanations
  • UPD Date: 13.06.2026
  • Source File: 2021440.pdf
  • Pages: 15
  • Description: Setup instructions for the Southwire 10030S.
Pages Preview:
  • Introduction WARNINGS 1 The Southwire 10030S multimeter measures AC and DC voltage, DC current, and resistance. It also tests continuity, diodes, and batteries. Readings are displayed on a large backlit LCD. This meter is fully tested and calibrated and, with proper use, will provide many years of reliable service. • Read, understand and follow the Safety Rules and Operating Instructions in this manual before using this meter. • The meter’s safety
  • 3 International Safety Symbols Potential danger. Indicates the user must refer to the manual for important safety information Indicates hazardous voltages may be present Equipment is protected by double or reinforced insulation Indicates the terminal(s) so marked must not be connected to a circuit where the voltage with respect to earth ground exceeds the maximum safety rating of the meter Indicates the terminal(s) so marked may be subjected to hazardous v
  • 5 Operation HOLD button To freeze the reading on the LCD display, press the HOLD button. The “HOLD” indicator will appear on the LCD display. Press the HOLD button again to return to normal operation. Backlight Button The backlight illuminates the display when the ambient light is too low to permit viewing of the displayed readings. Press the backlight “ ” button to turn the backlight on. Press it again to turn the backlight off. V
  • 7 Operation DC Current Measurements 1. Insert the black test lead into the negative COM input jack. 2. For current measurements up to 10A DC, set the rotary function switch to the 10A range and insert the red test lead into the 10A input jack. 3. For current measurements up to 200mA DC, set the rotary function switch to 200mA and insert the red test lead into the positive mA input jack. 4. Remove power from the circuit under
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Operating Instructions 10030S DIGITAL MULTIMETER Multímetro Digital 10030S S A F E T Y R A T E D CAT II 600V UL61010-1 S A F E T Y R A T E D CAT III 300V UL61010-1 µA mA 20 200 10A 1.5V 9V 2000 2000 200 200 20 k k k BATT. mA mA HOLD COM 10A For 30sec. MAX every 15 min FUSED 2000 200 600 600 OFF 200 20V 2000 200 mV mV ! ! Instrucciones de uso 12/14 Rev. 1 10030S manual Contents Made in China Product distributed by Southwire Company, LLC One Southwire Drive, Carrollton, GA 30119 ©2014 Southwire Company, LLC. All rights reserved. southwiretools.com 1-855-SW-T00LS Toll Free Technical Help Línea de Ayuda Técnica Gratuita Scan for warranty information and to access our mobile site. Escanea para información de garantía y acceso a nuestro sitio móvil.

Southwire 10030S: Multimeter Category Related Instructions

17B
RAGU 17B
24.04.2026 12 pages

1 RAGU 17B DIGITAL MULTIMETER OPERATION MANUAL Operation instructions for the RAGU 17B Multimeter. It explains connectivity options, performance details, safety.

PMC-53A-E
CET PMC-53A-E
17.04.2026 112 pages

1 PMC-53A-E Intelligent Multifunction Meter User Manual Version: V1.0A March 8, 2019 Instruction and usage manual for the CET PMC-53A-E Multimeter. This guide describes wiring diagrams, product handling, maintenance guidelines.

DM-0301
Datakom DM-0301
04.09.2026 2 pages

These state-of-the-art panel meters are designed for accurate measurement of the AC RMS voltage, AC RMS current, frequency, active power and power factor in single-phase systems. The current transformer ratio can be set between 5/5A and 5000/5A via front panel Product instruction handbook for the Datakom DM-0301 Multimeter. This documentation details product safety, interface navigation, operation.

8590 E-Series
Agilent Technologies 8590 E-Series
31.07.2026 371 pages

Errata Title & Document Type: Manual Part Number: Revision Date: HP References in this Manual This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett- Packard's former test and measurement, semiconductor products and chemical ana Device user manual for the Agilent Technologies 8590 E-Series Multimeter. The document includes technical assistance, adjustment procedures, shutdown procedures.