Squareled Color Designer 18x12W RGBAW+UV Manuals

User Manual: Squareled Color Designer 18x12W RGBAW+UV Caution! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires! Keep this device away from rain and moisture! Make sure it is grounded when using it! Unplug mains lead before opening the housing! For your own safety, please read this user manual carefully before you initial start-up. Introduction Thank you for having chosen „Color Designer 18x12W RGBAW+UV“. You will see you acquired a powerful and versatile device. Unpack your item. Before you initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device. Safety instructions This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Always disconnect from the mains, when the device is not in use or before cleaning it. Keep away children and amateurs from the device! There are no serviceable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers. Features Three operation modes: DMX 512 protocol, auto and master/slave and operating in various modes to form different led effects DMX-512 connection / connection between fixtures Occupation of the XLR-connection: If you are using controllers with this occupation, you can connect the DMX-output of the controller di- rectly with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other XLR-outputs, you need to use adapter-cables. Building a serial DMX-chain: Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always connect one output with the input of the next fixture until all fixtures are connected. Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder 2 a 120 resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture. Connection with the mains Connect the device to the mains with the enclosed power supply cable Manual | Color Designer 18x12W RGBAW+UV Manual | Color Designer 18x12W RGBAW+UV Control menu map