SSP MLC141 Manuals

1 pdf manual(s) SSP MLC141 for free download (Document Types: Instruction manual)

SSP MLC141 Instruction manual [PDF] (8 pages)

  • Identifier: id-2050136
  • Brand: SSP
  • Device: MLC141 Saw
  • Type: PDF
  • Key Aspects: Technical Data and Parameters, Risk Mitigation and Accident Prevention, Troubleshooting Information
  • UPD Date: 01.08.2026
  • Source File: 2237721.pdf
  • Pages: 8
  • Description: Instruction guide for the SSP MLC141.
Pages Preview:
  • 2 ENGLISH (Original instructions) SPECIFICATIONS Model MLC141 Wheel diameter 355 mm Hole diameter 25.4 mm No load speed (min-1) 3,800 Dimensions (L x W x H) 500 mm x 280 mm x 620 mm Net weight 16.7 kg Safety class /II • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • Weight according to EPTA-Procedure 01/2003 END201-5 Symb
  • 3 8. Dress properly. Do not wear loose clothing or jewellery, they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protecting hair covering to contain long hair. 9. Use safety glasses and hearing protection. Also use face or dust mask if the cutting operation is dusty. 10. Connect dust extraction equipment. If devices are provided for the connection of dust extraction and collection facilities
  • 4 14. Use the cutting edge of the wheel only. Never use side surface. 15. If the wheel stops during the operation, makes an odd noise or begins to vibrate, switch off the tool immediately. 16. Always switch off and wait for the wheel to come to a complete stop before removing, securing workpiece, working vise, changing work position, angle or the wheel itself. 17. Do not touch the workpiece immediately after operation; it is extremely hot and could burn yo
  • 5 The original spacing or interval between the vise and the guide plate is 0 - 170 mm. If your work requires wider spacing or interval, proceed as follows to change the spacing or interval. Remove the two hex bolts which secure the guide plate. Move the guide plate as shown in the figure and secure it using the hex bolts. The following interval settings are possible: 35 - 205 mm 70 - 240 mm CAUTION: • Remember that narrow workpieces may not be secured sa
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION IMPORTANT: Read Before Using. Portable Cut-Off MLC141 012154

SSP MLC141: Saw Category Related Instructions

C 6SSl C 7SS
Hitachi C 6SSl C 7SS
13.08.2026 40 pages

Circular saw Sierra circular 手提電動圓鋸 원형톱 เลื่อยวงเดือน Gergaji bulat C 6SS • C 7SS Read through carefully and understand these instructions before use. Leer cuidadosamente y comprender estas instrucciones antes del Owner’s manual for the Hitachi C 6SSl C 7SS Saw. It contains information on startup procedures, regulatory notices, hardware instructions.

M18 ONESX-902X
Milwaukee M18 ONESX-902X
13.07.2026 39 pages

M18 ONESX Original instructions Originalbetriebsanleitung Notice originale Istruzioni originali Manual original Oorspronkelijke gebruiksaanwijzing Original brugsanvisning Original bruksanvisning Bruksanvisning i original Alkuperäiset ohjeet Πρωτότυπο Device instruction guide for the Milwaukee M18 ONESX-902X Saw. The manual provides technical details on supported accessories, functional overview, performance guidelines, maintenance guidelines.

80160
Greatneck 80160
18.05.2026 19 pages

Owner’s Manual Variable Speed Jigsaw 80160 CAUTION: Before using this jigsaw or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions. • General Safety Rules Specific Safety Rules and Symbols • Functional Operating instructions for the Greatneck 80160 Saw. It explains configuration options and energy usage, operating guidelines, interface navigation, warranty information.

TDU 210PS
Yamato TDU 210PS
30.05.2026 33 pages

Troncatrice con piano superiore TDU 210PS Table & mitre saw TDU 210PS Sierra oscillante con sobremesa TDU 210PS cod. 92004 Manuale istruzioni ITALIANO Instruction manual ENGLISH Manual de instrucciones ESPAÑOL Distribuzione PADOVA -ITALY Quick reference guide for the Yamato TDU 210PS Saw. The document offers guidance on usage examples, startup procedures, wiring diagrams, detailing setup.