Owner's manual [PDF] (8 pages)
- Updated: 03.05.2026
Document Preview & Text Transcription
www.thomann.de
1
Owner‘s Manual
DIMMING
CHASER
DC-405B
STAIRVILLE • DIMMER DC-405S
2
Thank you for choosing our 4 channel dimming chaser. Please read this
user manual carefully and follow the instructions to avoid danger or damage
to the unit due to mishandling. Keep this user guide for future reference.
If you give the unit to another user, be sure that he also receives this
instruction booklet.
Safety instruction
You have to carefully read the instruction, which includes important
information about the installation, usage and maintenance, BEFORE
operating this device.
X
X This device is exclusively meant to be used as a dimming chaser pack
within the limits given in this manual. Using it in any other way you risk
electric shock and warranty will become void.
X
X Never sever or manipulate the power cord or the plug. If a power cord is
provided with an earth lead, this is mandatory to ensure safe operation!
Otherwise a LIFE THREATENING situation exists!
X
X Unpack and check carefully there is no transportation damage before
using the unit. Never put a damaged device into operation.
X
X Before operating, ensure that the voltage and frequency of power supply
match the power requirements of the unit as stated in this manual.
X
X The unit is for indoor use only. Use it only in a dry location. Exposing the
device to rain or moisture would cause the risk of electrical shock or fire.
X
X DO NOT let any liquids or objects enter the unit. Should any liquid
be spilled on the unit, DISCONNECT the power supply to the unit
immediately and contact the service company.
X
X The unit must only be installed in a location with adequate ventilation.
Be sure that no ventilation slots are blocked. In order to guarantee
adequate ventilation, allow a free air space of at least 20 cm around the
sides and top of the unit.
X
X Disconnect the device from the mains power before any servicing or
maintenance.
X
X Notice regarding power disconnection:
To disconnect the device from the power source the power plug must
be removed from the power socket. For this reason the device must
be placed in a position where a constant unobstructed access to the
power socket is assured, thus in an emergency situation you are able
to immediately pull out the power plug. To eliminate the risk of fire you
must completely disconnect the power plug from the power socket after
the device has been used.
www.thomann.de
3
X
X Always grasp the power cord by the plug. Do not pull on the cord itself
and never touch the power cord with wet hands as this could result in
a short circuit or an electrical shock. Do not place the device, speaker
cabinets or anything else on the power cord and make sure that it does
not become clamped. Place the power cord in a position where it can
not be trod on. A damaged power cord can cause a fire or an electrical
shock. Check the power cord from time to time. Should it become
damaged contact our customer service centre to have it replaced.
X
X You have to ensure, that the power cord never becomes wet during
operation.
X
X Before a storm and/or a thunderstorm with a risk of lightning, disconnect
the device from the mains power supply.
X
X Under no circumstances may you open the device housing. Should you
do so your safety would not be assured and the warranty will become
void. There are no operational components whatsoever inside, only
dangerous voltages that can give you a deadly shock!
X
X NEVER use the unit under the following conditions:
> In places subject to vibrations or bumps.
> In places with a temperature of over 45 °C or less than 2 °C.
> In places subject to excessive dryness or humidity (ideal conditions
are between 35% and 80%).
X
X Never submerse the device in water or any other liquid. Only wipe it
with a slightly damp cloth.
X
X Never operate the device near flames, flammable, explosive materials,
or hot surfaces. Otherwise you run the risk of causing a fire.
X
X Never leave this device running unattended.
X
X This appliance must not be used by individuals (including children) with
restricted physical, physiological or intellectual abilities or deficiencies in
experience and/or knowledge unless they are supervised by a person
responsible for their safety or receive from this person instruction in how
the appliance is to be used.
X
X Keep children away from the device and power cord! Children
frequently underestimate the dangers of electrical devices. Also keep
the plastic packaging well away from small children. There is a risk of
suffocation!
X
X In the event of serious operating problems, stop using the unit
immediately. Never try to dismantle, repair or modify the unit by
yourself. Otherwise warranty becomes void. Repairs carried out by
unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance centre.
STAIRVILLE • DIMMER DC-405S
4
Introduction
The DC-405B is a 4 channel dimming chaser. It is the most advanced unit
for its size and price. The unit offers 7 operating modes, 42 built-in chasing
programs, fade time control, and memory backup.
Technical specifications
Power supply voltage
AC 230 V~, 50 Hz, 16 A
Audio input
100 mV - 1 Vpp
Fade time
0 - 10 seconds
Fuse
4 A, 250 V, 5 x 20 mm
Dimension
482 x 132 x 126.5 mm / 19”, 3 rack units
Weight
4.5 kg
As we continuously strive to improve our products, all specifications and
appearance are subject to change without prior notice.
Control elements
On front panel
1. POWER SWITCH
2. CHANNEL FLASH
Press to activate channel full on.
3. CHANNEL DIMMER
This control adjusts the dimming level of the
corresponding channel.
Pages Preview: