Stairville MH-X25 Manuals

Owner‘s Manual led spot moving head MH-X25 - 2 - Congratulations on your purchase of our Moving Head. With your MH- X25 you can easily set up an impressive light show. This model provides high quality workmanship with a range of useful features. To achieve the best performance and safety operation, you must read all of this manual before using it in a live situation. Table of Contents Safety Instruction...............................................................................3 12 Control Channel...........................................................................5 6 Control Channel.............................................................................7 Control Board....................................................................................9 Password channel.........................................................................9 Maintenance....................................................................................11 Disposal...........................................................................................11 Technical Specification......................................................................11 - 3 - Safety Instruction For your own safety you must read this section in full first! Risk of electrical shock. Connect the device only to an electrical wall socket providing a mains • voltage of 230 V / 50 Hz. NEVER operate the device if the power plug or power the cord is • damaged. NEVER submerse the device in water. Wipe it only with a slightly damp • cloth. Liquid getting into the device will risk a short circuit and will be hazardous. NEVER expose the device to direct precipitation or moisture and never • use it in a damp or wet environment. Indoor use only! Ensure that the power cord does not become wet during operation. • Do not subject the device to high temperatures, direct sunlight, severe • vibrations, shocks or tremors, or excessive dust. You must NEVER open the housing of the device or try to repair it. • There are no user serviceable parts inside. Warranty will become void if you open the housing. Do not place objects containing fluids, e.g. flower vases or beer bottles, • on or near the device. Notice regarding power disconnection • To completely disconnect the device from the mains power source the power plug must be removed from the power socket. For this reason the device must always be placed in a position where a constant unobstructed access to the power socket is assured, thus in an emergency situation you are able to immediately pull out the power plug. To eliminate the risk of fire you should completely disconnect the power plug from the power socket when the device is not going to be used. Always grasp the power cord by the plug. Do not pull on the cord itself • and never touch the power cord with wet hands as this could result in a short circuit or an electrical shock. Do not place the device, speaker cabinets or anything else on the power cord and make sure that it does not become clamped. Place the power cord in a position where it can not be trod on. A damaged power cord can cause a fire or an electrical shock. Check the power cord from time to time. Should it become damaged contact our customer service centre to have it replaced.

USER MANUAL . 1 . . 10 . Maintenance 1. Please keep the light in dryness and avoiding use in wet place. 2. Using intermittently can be extended the life. 3. Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects better. 4. Please do not wipe the crust using organic menstruum for avoid to damage the product. Statement The product has well capability and intact packing when leave factory. All of the user should comply with above warning item and manual, any misuse cause of the damages are not included in our guarantee, and also can not be responsible for any malfunction & problem owing to ignore the manual. Please forgive that we will not be notice for technical change. TABLE OF CONTENTS Maintenance----------------------------------------------------1 Statement-------------------------------------------------------1 Attention Item -------------------------------------------------2 Product introduction ------------------------------------------2 12 Control Channel -------------------------------------------3 6 Control Channel ---------------------------------------------6 Control Board--------------------------------------------------8 System reset Lode default . 9 . . 2 . Attention Item 1. For guarantee the life of product, please don't put it on the wet place and also not use it in the place over 40 degree. 2. Please don't lay the product on the unfixable or shakable place. 3. Ask for the professional to maintain the product in order to avoid the danger of get an electric shock. 4. Power supply should not be changed over 10% while the light is using, it will be decreased the life of lamp if the power is too high, but it will be influenced the luminosity if the power is too low. 5. After power off, if it is need used again, please cool down over 20 minutes. 6. Please look round the manual for ensure the product can be used normally. Product introduction Power supply: AC230V, 50Hz Power consumption: 102W Fiting lamp: LED 25W LED DMX-control-channels: 6 or 12, select from control board Color: 8 + open + rainbow Gobo-wheel: 7 gobo + open + rainbow Shuttle: Flash rate: 0-10Hz Dimmer: 0~100% mechanic dimmer Maximum PAN-movement: 540 Maximum TILT-movement: 270 Master/Slave ativated by sound at pre-programmed function. colour TILT 270 TILT 180 TILT 90 PAN 540 PAN 360 PAN 180 DMX: Slow show Fast show Sound control show East controller show Pan inverted Pan inverted function Tilt inverted Tilt inverted function Switch channel mode Basic mode Display inverted function Display inverted Slave function Select Slave