Standard IGL15 Manuals

1 pdf manual(s) Standard IGL15 for free download (Document Types: Operation and maintenance manual)

Standard IGL15 Operation and maintenance manual [PDF] (45 pages)

  • Identifier: id-2049762
  • Brand: Standard
  • Device: IGL15 Industrial Equipment
  • Type: PDF
  • Key Aspects: Component Longevity Optimization, End-of-Life Handling and Disposal, Storage and Care Recommendations
  • UPD Date: 08.04.2026
  • Source File: 2238095.pdf
  • Pages: 45
  • Description: User instruction booklet for the Standard IGL15.
Pages Preview:
  • IGL15 Spare parts replacement manual Version：S2018.05 1 Catalogue ATALOGUE ............................................................................................................................................ 1 1. PREFACE ....................................................................................................................................... 2 1.1. SAFETY DECLARATION ...................................................................
  • IGL15 Spare parts replacement manual Version：S2018.05 2 1. Preface 1.1. Safety Declaration Only qualified personnel are allowed to perform any planning, installation or maintenance work to GTW7 series gearless PMS elevator traction machines. The personnel must be trained for the job and must be familiar with the installation, assembly, commissioning and operation of the product. Sufficient knowledge in lift construction is essential. Their commissioning
  • IGL15 Spare parts replacement manual Version：S2018.05 3 8 V4NSY10 Micro-Switch 2 1000mm(UL) 2. Spare Parts Replacement Operation 2.1. Traction wheel replacement 2.1.1. Remove the traction sheave 1. Loosen nut M12 and washer 12 with an open wrench (18 mm) and remove the swing bar. Loosen nut M12 and washer 12 with an open wrench (18mm), and remove screw M12×55 with a hexagon wrench (10mm). 2. Loosen bolt M12×40 and washer 12 with an open wrench (18mm).
  • IGL15 Spare parts replacement manual Version：S2018.05 4 3. Remove the bolt M12×50 from the threaded hole in the traction wheel 2-m12, and tighten the bolt diagonally with an open wrench (18mm) until the traction wheel and pin 12 are pushed out and the traction wheel is removed. Bolt M12×40 Washer M12 Pin 12 traction wheel 2-m12
  • IGL15 Spare parts replacement manual Version：S2018.05 5 2.1.2. Install the traction sheave 1. Clean the matching surface of brake wheel and traction wheel. Screw two pieces of screw M12×100 diagonally inside the screw hole of the traction wheel, and then install the traction wheel through the screw M12 onto the brake wheel, and slowly press the traction wheel into the brake wheel with bolt M12×80. Hammer pin 12 into the corresponding hole. 2. Remove sc
Document Preview & Text Transcription (Main Page)
Click to expand and read text
IGL15 Permanent magnet synchronous elevator traction machine Product Operation and Maintenance Manual S2018.05

Standard IGL15: Industrial Equipment Category Related Instructions

Simatic S7-1500
Siemens Simatic S7-1500
30.08.2026 105 pages

Complete service manual for the Siemens Simatic S7-1500 Control Unit. It details operating modes and operating guidelines, installation steps, power requirements, regulatory notices.

SIMATIC NET SCALANCE WxM763
Siemens SIMATIC NET SCALANCE WxM763
07.09.2026 80 pages

SCALANCE WxM763 SIMATIC NET Industrial Wireless LAN SCALANCE WxM763 Operating Instructions 03/2022 C79000-G8976-C653-01 Introduction 1 Safety notices 2 Security recommendations 3 Description of the device 4 Installation and removal 5 Connection 6 Maintenance a Technical setup manual for the Siemens SIMATIC NET SCALANCE WxM763 Industrial Equipment. The manual includes instructions for configuration options, error codes, performance details, maintenance.

SA20F
Frontier SA20F
30.07.2026 20 pages

O W N E R ’ S / O P E R A T O R ’ S M A N U A L LIGHT DUTY SKID STEER CARRIER A D A P T E R for COMPACT TRACTOR FRONT LOADERS SA20F 5WS105014 5/2019 Official product manual for the Frontier SA20F Industrial Equipment. It provides instructions for repair references, internal layout, application scenarios, technical guidelines.

3VA1225 - 1AA.2
Siemens 3VA1225 - 1AA.2
20.08.2026 6 pages

s DE GEFAHR Gefährliche Spannung. Lebensgefahr oder schwere Verletzungsgefahr. Vor Beginn der Arbeiten Anlage und Gerät spannungsfrei schalten. Die Installations- und Wartungsarbeiten an diesem Gerät dürfen nur von einer autorisierten Elektrofachkraft ausg User instruction manual for the Siemens 3VA1225 - 1AA.2 Industrial Equipment. The manual provides technical details on component replacement, setup validation, functional overview.