Steelcase FRAMEONE FE-3 Manuals

4 pdf manual(s) Steelcase FRAMEONE FE-3 for free download (Document Types: Assembly instruction manual, Assembly instructions, Assembly instructions manual)

Steelcase FRAMEONE FE-3 Assembly instruction manual [PDF] (8 pages)

  • Identifier: id-2256719
  • Brand: Steelcase
  • Device: FRAMEONE FE-3 Indoor Furnishing
  • Type: PDF
  • Key Aspects: Standard Operating Procedures, Best Practices for Everyday Use, Step-by-Step Assembly Procedures
  • UPD Date: 21.04.2026
  • Source File: 2030906.pdf
  • Pages: 8
  • Description: Product operation guide for the Steelcase FRAMEONE FE-3.
Pages Preview:
  • Page 2 of 8 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on Both Sides of 90 Degree Table ® May 2009 FE-3 Screens + Table 3. Remove all FE-3 screen bottom caps. 3
  • Page 3 of 8 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on Both Sides of 90 Degree Table ® May 2009 FE-3 Screens + Table 4. Slide the Straight Bracket into the side slot of the FE-3 Screen ‘A’ as shown configuration. 5. Slide the Corner Screen Bracket into the other side slot of the FE-3 Screen ‘A’ as shown. 6. Re-install both bottom caps of the FE-3 Screen A. 4 5 6 FE-3 screen ‘A’
  • Page 4 of 8 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on Both Sides of 90 Degree Table ® May 2009 FE-3 Screens + Table 7. Slide the Corner Bracket into the side slot of the FE-3 Screen ‘B’ as shown configuration. 8. Slide the Straight Screen Bracket into the other side slot of the FE-3 Screen ‘B’ as shown. 9. Re-install both bottom caps of the FE-3 Screen ‘B’. 9 7 8 FE-3 Screen ‘B’
  • Page 5 of 8 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on Both Sides of 90 Degree Table ® May 2009 FE-3 Screens + Table 10. Refer to the diagram on the right to define the desired height for the screens. 11. Align the middle Set Screw to the desired Screen Height guide hole. Tighten this screw to lock it to the guide hole. Then, tighten the rest of the Set Screws to secure the bracket. Align the other bracket to the sam
  • Page 6 of 8 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on Both Sides of 90 Degree Table ® May 2009 FE-3 Screens + Table 12. Remove the support bracket. 13. Position the FE-3 screen ‘A’ and ‘B’ to the table. The screen brackets should be attached to the understructure of the table. Make sure that the sides of the screens are flush with the sides of the table top. Straight Bracket Corner Bracket FE-3 Screen ‘A
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Page 1 of 8 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on Both Sides of 90 Degree Table ® May 2009 FE-3 Screens + Table 1. Fix the Connection Bracket to the Corner Bracket by tightening two M6 screws each. Install as left and right configuration as shown. Loosen the set screws but do not remove it. 2. Fix the Connection Bracket to the Straight Bracket by tightening two M6 screws each. Install as left and right configuration as shown. Loosen the set screws but do not remove it. 2 FE-3 Screens 1 Loosen Set screws Connection Bracket Corner Bracket Loosen Set screws Connection Bracket Straight Bracket

Steelcase FRAMEONE FE-3 Assembly instruction manual [PDF] (6 pages)

  • Identifier: id-2256720
  • Brand: Steelcase
  • Device: FRAMEONE FE-3 Indoor Furnishing
  • Type: PDF
  • Key Aspects: Risk Mitigation and Accident Prevention, Environmental Factors and Restrictions, Critical Operational Precautions
  • UPD Date: 06.04.2026
  • Source File: 2030905.pdf
  • Pages: 6
  • Description: Manual for installation and usage of the Steelcase FRAMEONE FE-3.
Pages Preview:
  • Page 2 of 6 FRAMEONE Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen + Table 3. Slide the Straight Bracket into the side slot of the FE-3 Screen as shown. 4. Slide the Corner Screen Bracket into the other side slot of the FE-3 Screen as shown. 5. Re-install both bottom caps of the FE-3 Screen. 3 4 5
  • Page 3 of 6 FRAMEONE Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen + Table 6. Refer to the diagram on the right to define the desired height for the screen. 7. Align the middle Set Screw to the desired Screen Height guide hole. Tighten this screw to lock it to the guide hole. Then, tighten the rest of the Set Screws to secure the bracket. Align the other bracket to the same heigh
  • Page 4 of 6 FRAMEONE Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen + Table 8. Unscrew the corner bracket’s M6 screws of the installed screen and remove both rectangular plates. 9. Position the add-on FE-3 screen to the table. The screen bracket should be attached to the understructure of the table. Make sure that the side of the screen is flush with the side of the tabl
  • Page 5 of 6 FRAMEONE Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen + Table 10. Tighten two M6 screws with its rectangular plate on the straight bracket as shown. Make sure it is fixed securely. 11. Insert the threaded rectangular plate into the corner bracket. Tighten two M6 screws that locks the position of both brackets to the table frame. M6 Screw M6 Screw Rectan
  • Page 6 of 6 FRAMEONE Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screens + Table 12. View of the completed installation of FE-3 Screens to a FrameOne 90 degree table. 12
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Page 1 of 6 FRAMEONE Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen + Table 1. Fix the Connection Brackets to the Straight and Corner Bracket by tightening two M6 screws each as shown configuration. Loosen the set screws but do not remove it. 2. Remove both Add-on FE-3 screen bottom caps. Add-on FE-3 Screen 2 1 Loosen Set screws Loosen Set screws Connection Bracket Corner Bracket Straight Bracket

Steelcase FRAMEONE FE-3 Assembly instructions [PDF] (5 pages)

  • Identifier: id-2256718
  • Brand: Steelcase
  • Device: FRAMEONE FE-3 Indoor Furnishing
  • Type: PDF
  • Key Aspects: Detailed Installation Instructions, Basic Configuration Guidelines, Package Contents and Accessories List
  • UPD Date: 03.07.2026
  • Source File: 2030907.pdf
  • Pages: 5
  • Description: Device technical manual for the Steelcase FRAMEONE FE-3.
Pages Preview:
  • Page 2 of 5 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on a Straight Table ® May 2009 FE-3 Screen + Table 3. Slide the Straight Brackets into the side slots of the FE-3 Screen as shown. 4. Re-install both bottom caps of the FE-3 Screen. 3 4
  • Page 3 of 5 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on a Straight Table ® May 2009 FE-3 Screen + Table 5. Refer to the diagram on the right to define the desired height for the screen. 6. Align the middle Set Screw to the desired Screen Height guide hole. Tighten this screw to lock it to the guide hole. Then, tighten the rest of the Set Screws to secure the bracket. Align the opposite bracket to the same height and repeat
  • Page 4 of 5 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on a Straight Table ® May 2009 FE-3 Screen + Table 7. Position the FE-3 screen to the table. The screen bracket should be attached to the understructure of the table. Make sure that the side of the screen is flush with the side of the table top. 8. Tighten two M6 screws with its rectangular plate on each bracket as shown. Make sure it is fixed securely. M6 Screw Rect
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Page 1 of 5 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on a Straight Table ® May 2009 FE-3 Screen + Table 1. Fix the Connection Bracket to the Straight Bracket by tightening two M6 screws each. Install as left and right configuration as shown. Loosen the set screws but do not remove it. 2. Remove both FE-3 screen bottom caps. 2 1 FE-3 Screen Loosen Set screws Connection Bracket Straight Bracket

Steelcase FRAMEONE FE-3 Assembly instructions manual [PDF] (6 pages)

  • Identifier: id-2256717
  • Brand: Steelcase
  • Device: FRAMEONE FE-3 Indoor Furnishing
  • Type: PDF
  • Key Aspects: User Training Recommendations, Warranty and Service Information, Routine Functionality Testing
  • UPD Date: 07.04.2026
  • Source File: 2030908.pdf
  • Pages: 6
  • Description: User and installation guide for the Steelcase FRAMEONE FE-3.
Pages Preview:
  • Page 2 of 6 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen (Left Hand) + Table 3. Slide the Straight Bracket into the side slot of the FE-3 Screen as shown. 4. Slide the Corner Screen Bracket into the other side slot of the FE-3 Screen as shown. 5. Re-install both bottom caps of the FE-3 Screen. 3 4 5
  • Page 3 of 6 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen (Left Hand) + Table 6. Refer to the diagram on the right to define the desired height for the screen. 7. Align the middle Set Screw to the desired Screen Height guide hole. Tighten this screw to lock it to the guide hole. Then, tighten the rest of the Set Screws to secure the bracket. Align the other bracket to the same
  • Page 4 of 6 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen (Left Hand) + Table 8. Remove the support bracket shown. 9. Position the FE-3 screen to the table. The screen bracket should be attached to the understructure of the table. Make sure that the side of the screen is flush with the side of the table top. Straight Bracket Corner Bracket 9 8
  • Page 5 of 6 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen (Left Hand) + Table 10. Tighten two M6 screws to the Straight Bracket through the rectangular plate. Make sure it is tightly secured. 11. Slide rectangular plate 1 into the Corner Screen Bracket. Make sure the holes are aligned. Tighten two M6 screws to the Straight Bracket through rectangular plate 2.
  • Page 6 of 6 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen (Left Hand) + Table 12. View of the completed installation of FE-3 Screen to a FrameOne 90 degree table. FE-3 Screen Straight Bracket View Corner Bracket View
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Page 1 of 6 FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table ® May 2009 FE-3 Screen (Left Hand) + Table 1. Fix the Connection Brackets to the Straight and Corner Bracket by tightening two M6 screws each as shown configuration. Loosen the set screws but do not remove it. 2. Remove both FE-3 screen bottom caps. 2 FE-3 Screen 1 Loosen Set screws Loosen Set screws Connection Bracket Corner Bracket Straight Bracket

Steelcase FRAMEONE FE-3: Indoor Furnishing Category Related Instructions

Williamsburg 0554.700
American Standard Williamsburg 0554.700
02.05.2026 1 pages

Official product manual for the American Standard Williamsburg 0554.700 Indoor Furnishing. This guide provides technical guidance on setup instructions, testing procedures, daily usage, compatibility information.

SCENIKIT SCENICA
Bettio SCENIKIT SCENICA
01.04.2026 68 pages

Montage-, Benutzungs- und Wartungshandbuch Manuale di installazione, uso e manutenzione Manuel de montage, utilisation et maintenance Installation, user and maintenance manual Product operation guide for the Bettio SCENIKIT SCENICA Indoor Furnishing. It details safety instructions and service contacts, usage procedures, firmware updates.

CUFF Bed
Bonaldo CUFF Bed
31.07.2026 7 pages

Letto Bed Bett Lit FOTO PRODOTTO CUFF Design: Mauro Lipparini Assembly instruction Aufbauanleitung Notice de montage Scheda montaggio Professional user manual for the Bonaldo CUFF Bed Indoor Furnishing. It explains safety precautions, installation steps, safety features.

CM3550PC-2PK
Furniture of America CM3550PC-2PK
28.03.2026 6 pages

EASY The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended. CM3550PC-2PK Allen Wrench (Included) Assembly Instr Product reference manual for the Furniture of America CM3550PC-2PK Indoor Furnishing. The guide explains operation and supported accessories, menu navigation, specifications.