Stentofon LBB 7026/71 Manuals

mounting guide bi-way gooseneck microphone lbb 7026/71 lbb7026/80 2009-10 mi 23813 MI 23813 - 2 - GB 2009-10 geneRAL deSCRiPtion The Bi-Way gooseneck microphone is designed for easy mounting to the Bi-Way operator’s unit. •� The microphone is a directional noise canceling type for use under extreme noise conditions. •� When mounted, the operator can switch between the original built-in microphone and the gooseneck microphone. •� The gooseneck microphone may also be mounted on a free-standing support apart from the operator’s unit. •� Bi-Way units Bi-Way starter kit LBB 7026/65 Bi-Way operator’s unit LBB 7026/60 Bi-Way microphone kit LBB 7026/70 Bi-Way loudspeaker kit LBB 7026/80 Power supply LBB 7102/60 Bi-Way gooseneck microphone LBB 7026/71 Bi-Way external microphone LBB 7026/72 Bi-Way flush-mount loudspeaker kit LBB 7026/81 Bi-Way hearing aid kit LBB 7026/82 Headset with microphone LBB 7072/26 Headset/microphone kit LBB 7072/25 Flush-mount back box - 60 mm LBB 7073/61 Flush-mount frame LBB 7073/70 Handset with cradle kit LBB 7073/82 Cradle bracket LBB 7073/84 mounting Perform the installation of the Bi-Way starter kit according to instruction mi 23613. �Open the station by inserting a thin object, e.g. paper clip, through the small holes at the microphone end. �Separate the front and rear covers. GB - 3 - MI 23813 2009-10 LBB 7026/71 - gooseneck microphone mount the optional gooseneck microphone to improve the signal/noise ratio from the operator’s side. �Break out the tinted field between the buttons and the loudspeaker. �Route the microphone cable through the opening, the spacer, lock washer and nut. �Tighten the nut on the microphone threaded stud. �Insert the microphone plug in connector P9. �Close the solder-split N3 to activate the gooseneck microphone function. ● By pushing the yellow button one can toggle between built-in and gooseneck microphones. The LED is lit when the gooseneck microphone is selected. ● The gooseneck microphone can also be mounted on a separate stand. The cable is then routed through the left break-out in the station rear cover. www.vingtor.com STENTOFON and VINGTOR products are developed and marketed by Zenitel Norway AS. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001:2002. Zenitel Norway AS reserves the right to modify designs and alter specifications without prior notice, in pursuance of a policy of continuous improvement. © 2009 Zenitel Norway AS. [email protected] DOC NO DOC NO MI 23813 www.stentofon.com Zenitel Norway AS - P.O. Box 4498 Nydalen - NO-0403 Oslo - Norway STENTOFON and VINGTOR products are developed and marketed by Zenitel Norway AS. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001:2002. Zenitel Norway AS reserves the right to modify designs and alter specifications without prior notice, in pursuance of a policy of continuous improvement. © 2009 Zenitel Norway AS. [email protected] AdJuStmentS The volume on the public side can be adjusted without open- ing the station. The volume control is accessed by means of a small screwdriver through an opening under the station. Note that the volume control is common for both the built-in and the gooseneck microphones. The potentiometer is clearly marked. �Adjust the sound volume to a suitable level on the public side. oPeRAtion microphone selector The button is active only when a gooseneck microphone is mounted. Push the yellow button to toggle between built-in and gooseneck •� microphones. teCHniCAL SPeCiFiCAtionS Type number LBB 7026 71 Manufacturer, type PEIKER, ME 351 Length 220 mm Diameter, max. 12 mmØ Weight 130 g Color Black, gloss Element Electret, noise canceling Characteristics Uni-directional, kidney shape Frequency range 100 - 10000 Hz Sensitivity 7.2 mV/Pa ±3 dB Impedance 1000 ohm ±40% Current consumption >0.2 mA

2004-01 Bi-Way System LBB7026/XX USER GUIDE - EN KÄYTTÖOPAS - SF BRUKSANVISNING - SW GUÍA DEL USUARIO - ES GUIA DO UTILIZADOR - PT BRUKERVEILEDNING - NO GUIDE D’UTILISATION - FR BEDIENUNGSANLEITUNG - DE GEBRUIKERSHANDLEIDING - NL GUIDA PER L’UTILIZZATORE - IT 14 911 009 v.1.1 USER GUIDE 14 911 009 -2- 2004-01 C 400 BL C 400 BL LBB 7026/71 LBB 7026/73 LBB 7026/80 LBB 7026/73 LBB 7026/82 LBB 7026/81 LBB 7073/70 LBB 7026/60 LBB 7026/83 LBB 7073/82 LBB 7102/60 LBB 7026/65 Extra bi-way USER GUIDE Normal Mode 2004-01 -3- 14 911 009 ON / OFF • Push the blue button once to turn ON the station LED is lit. • Push once to turn OFF an active station LED is off. MICROPHONE SELECTOR The button is active only when a gooseneck microphone is mounted. • Push the yellow button to toggle between built-in and gooseneck microphones. LED is lit when the gooseneck microphone is selected. STANDBY The sound is reduced by -6 dB. • Push the green button once to force speech direction towards the operator, LED is lit. • Push again to return to duplex operation mode, LED is off. SIMPLEX (in STANDBY mode) ’Standby’ is selected, LED is lit. • Push and hold the pink button to make an announcement to the public side. The sound is increased by +6dB, LED is off. • Release the button to return to standby mode. PUSH-TO-TALK (in DUPLEX mode) The sound is increased by +6 dB. • Push and hold the pink button to force the speech direction towards the public side, LED is off. • Release the button to return to duplex mode, LED is off. EN