Supermicro SC417BE1C-R1K23JBOD Manuals

USER’S MANUAL Revision 1.0 SC417 SAS3 StoRAgE ENCLoSURES SC417BE1C-R1K23JBOD SC417BE2C-R1K23JBOD The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense. California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 1.0 Release Date: February 08, 2016 mk Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2016 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America iii Preface Preface About this Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the chassis. Installation and maintenance should be performed by experienced technicians only. This document lists compatible parts available when this document was published. Refer to the Supermicor web site for updates on supported parts and configurations This manual may be periodically updated without notice. Please check the Supermicro Web site for possible updates. Warnings Special attention should be given to the following symbols used in this manual. Warning! Indicates high voltage may be encountered when performing a procedure. Warning! Indicates important information given to prevent equipment/ property damage or personal injury. iv SC417 JBOD Chassis Manual Contents Chapter 1 Introduction ..............................................................................1-1 1-1 Overview ......................................................................................................... 1-1 1-2 Shipping List .................................................................................................... 1-1 1-3 Components .................................................................................................... 1-2 Drives .............................................................................................................. 1-2 Power Supply .................................................................................................. 1-2 Cooling ............................................................................................................ 1-2 Control Board .................................................................................................. 1-2 Mounting Rails ................................................................................................ 1-2 1-4 Where to get Replacement Components ........................................................ 1-2 1-5 Returning Merchandise for Service................................................................. 1-3 1-6 Contacting Supermicro .................................................................................. 1-4 Chapter 2 Standardized Warning Statements for AC Systems ............2-1 About Standardized Warning Statements ....................................................... 2-1 Warning Definition ........................................................................................... 2-1 Installation Instructions .................................................................................... 2-4 Circuit Breaker ................................................................................................ 2-5 Power Disconnection Warning ........................................................................ 2-6 Equipment Installation ..................................................................................... 2-8 Restricted Area ................................................................................................ 2-9 Battery Handling ............................................................................................ 2-10 Redundant Power Supplies ......................................................................... 2-12 Backplane Voltage ........................................................................................ 2-13 Comply with Local and National Electrical Codes ........................................ 2-14 Product Disposal ........................................................................................... 2-15 Hot Swap Fan Warning ................................................................................. 2-16 Power Cable and AC Adapter ...................................................................... 2-18 Chapter 3 System Interface ......................................................................3-1 3-1 Overview ......................................................................................................... 3-1 3-2 Control Panel Buttons ..................................................................................... 3-2 Power .............................................................................................................. 3-2 Reset ............................................................................................................... 3-2 3-3 Control Panel LEDs ........................................................................................ 3-2 Overheating ..................................................................................................... 3-4 3-4 Drive Carrier LEDs .......................................................................................... 3-4 3-5 Power Supply LEDs ........................................................................................ 3-5