Supermicro Supero C7H61 Manuals

SUPERMICR R CONTACT INFORMATION MNL-1455-QRG RE V .1.0A • www.supermicro.com (Email: [email protected]) • Manuals: http://www.supermicro.com/support/manuals • Drivers & Utilities: ftp://ftp.supermicro.com • Safety: http://www.supermicro.com/about/policies/safety_information.cfm © 2012 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed. PACKAGE CONTENTS (Applies to individual-pack only) C7H61 (-L) MOTHERBOARD QUICK REFEREN CE GUIDE RE V. 1.0A • One (1) Supermicro Motherboard • Six (6) SATA Cables • One (1) I/O Shield • One (1) Quick Reference Guide MNL-1455-QRG A. KB/Mouse Port H. LAN1 Port N. Center/LFE Out B. USB 0 (2.0) I. USB 2 (2.0) O. Surround Out C. USB 1 (2.0) J. USB 3 (2.0) P. S/PDIF Out (Optical) D. COM 1 (C7H61 Only) K. LAN2 Port Q. Line In E. VGA Port L. USB 4 (2.0) R. Line Out F. VESA DisplayPort M. USB 5 (2.0) S. Microphone In G. HDMI Port JPW2 JPW1 JWOL1 1 3 10 9 1 DIMM1 DIMM3 JF1 1 2 15 Tested to Comply With FCC Standards FOR HOME OR OFFICE USE DESIGNED IN USA 2 1 J14 7 10 J13 1 2 JUSB30 19 11 10 MH10 1 JD1 + SP1 JSD1 1 JTPM1 2 1 20 19 I-SATA0 1 I-SATA1 I-SATA2 I-SATA3 A-SATA0 A-SATA1 JITP1 60 2 59 1 B1 + 128 1 2 J34 COM2 1 5 6 9 COM5 1 5 COM6 1 5 6 9 COM7 1 5 6 9 COM8 1 5 6 9 1 5 6 COM3 9 1 5 6 COM4 9 BIOS LICENSE 1 JWOR1 JP2 JP1 JSPDIF_OUT JSPDIF_IN JI2C3 JL1 JI2C4 JBT1 JP3 1 JPME2 JI2C1 1 1 JI2C2 JUSBLAN1 JUSBLAN2 A LED1 C LED2 C A R474 JPUSB1 1 JWD1 1 JPAC1 JLED1 1 1 JCPUVRD_SMB FAN4 FAN1 1 FAN3 4 4 1 FAN2 MH6 MH7 JAUDIO1 103 128 64 39 38 2-3:Disable(Default) 1-2:Enable JPUSB1:USB WAKE UP 2-3:Disable 1-2:RST(Default) JWD1:Watch Dog OFF:NORMAL ON:ME MANUFACTURING MODE JPME2 VCC GND SW RST SW PWR GND PWR LED- LED- HDD LED+ HDD LED+ PWR PRINTER SLOT6 PCI-E 2.0/3.0 X16 SLOT5 PCI 33MHz SLOT4 PCI 33MHz SLOT3 PCI 33MHz OFF:DISABLE ON:ENABLE JI2C3/JI2C4:I2C BUS FOR PCI SLOT AUDIO AC97 AND HD AUDIO JUMPER USB10/11 USB8/9 USB3.0-0/1 JLED1: JL1: 3PIN POWER LED CHASSIS AUDIO FP SLOT1 PCI 33MHz BUZZER SLOT2 PCI 33MHz JBT1 JTPM1:TPM/PORT80 CMOS CLEAR ON:CLEAR OFF:NORMAL JWOR:WAKE ON RING JD1: SPEAKER:1-4 BUZZER:3-4 JPAC1:ONBOARD AUDIO ENABLE/DISABLE 1-2:ENABLE 2-3:DISABLE ON:AC'97 JHD_AC1: OFF:HD AUDIO SATA DOM PWR SLOT7 PCI-E 2.0 X1 UNB NON-ECC DDR3 DIMM REQUIRED HD AUDIO JWOL:WAKE ON LAN DIMMA1 DIMMB1 JI2C1/JI2C2:I2C BUS FOR PCI-E SLOT OFF:DISABLE ON:ENABLE RST ON PWR LAN2/ USB4/5 LED OH/FF X LED HDD NIC1 NIC2 LED PWR USB2/3 LAN1/ HDMI/DP VGA/COM1 /CPU FAN INTRUSION KB/MOUSE & USB0/1 Jumpers, Connectors and LED Indicators Back Panel I/O Connectors Memory Support Motherboard Layout and Features CPU Installation Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide. Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors, and LED indicators. Heatsink Installation Front Panel Control (JF1) Screw #1 Screw #2 Motherboard Screw #3 Mounting Hole Heatsink Bracket Power Button OH/Fan Fail LED 1 NIC1 LED Reset Button 2 HDD LED Power LED LED_Anode+ LED_Anode+ LED_Anode+ Ground Ground NIC2 LED LED_Anode+ X X LED_Anode+ Jumpers Connectors LED Indicators The C7H61 motherboard series supports up to 16GB of Unbuffered (UDIMM) non- ECC DDR3 1600/1333/1066 MHz in 2 memory slots. Note: For memory optimization, use only DIMM modules that have been validated by Supermicro. For the latest memory updates, please refer to our website a at http://www.supermicro.com/ products/motherboard. Memory Population Guidelines When installing memory modules, the DIMM slots should be populated in the following order: DIMMA1 and DIMMB1. • Always use DDR3 DIMM modules of the same size, type and speed. • Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the slowest DIMM. • The motherboard will support one DIMM module. However for best memory performance, install DIMM modules in pairs. Recommended Population (Balanced) DIMMA1 Slot DIMMB1 Slot Total System Memory 2GB 2GB 2GB 2GB 4GB 4GB 4GB 4GB 4GB 8GB 8GB 8GB 8GB 8GB 16GB Note: Due to memory allocation to system devices, the amount of memory that remains available for operational use will be reduced when 4 GB of RAM is used. DIMMB1 DIMMA1 Towards the edge of the motherboard Towards the CPU DIMM Memory Installation 5 JPAC1 Audio Enable Pins 1-2 (Enabled) 8,10 JI2C3,JI2C4 SMB Header for PCI Slots C7H61-L: Short (Enabled), C7H61: Open (Disabled) 12 JBT1 CMOS Reset Open (Disabled) 13 JPUSB1 USB Wake-Up Pins 2-3 (Disabled) 32 JWD1 Watch Dog Timer Reset Pins 1-2 (Reset) 41,42 JI2C2,JI2C1 SMB Header for PCIE Slots Open (Disabled) 43 JPME2 Intel ME Manufacturing Mode Pins 1-2 (Disabled) 30 LED1 Onboard Standby PWR LED Green: Solid on Standby Power is On 1 Backpanel I/O See "Backpanel I/O Connectors", below 2 AUDIO FP Front Panel Audio Header 3 JWOL Legacy Wake-On-LAN Header 4,14 COM2, COM3~8 COM2 Header, COM3~8 (Not supported on C7H61-L) ) 6,7 S/PDIF OUT, S/PDIF IN S/PDIF OUT/IN Digital Audio Headers 9 JL1 Chassis Intrusion Header 11 JWOR Wake-On-Ring Header 15 USB 3.0 1/0 USB Header 1/0 (3.0) (Not supported on C7H61-L) 16,45 USB10/11,8/9 USB 2.0 Header 10/11,8/9 17,20 A-SATA 0,1 (ASMedia) SATA 3.0 Ports (up to 6Gb/s) 18 JTPM1 Trusted Platform Module (TPM) Header 19 JSD1 Disk-On-Module (DOM) Power Header 24,22,23,21 I-SATA 0,1,2,3 (Intel) SATA 2.0 Ports 25 B1 System Battery 26,28,37,39 FAN 3,2,1,4 System FAN Headers 3,2,1 (CPU FAN),4 27 U5 BIOS Chip 29,40 JPW1,JPW2 24-Pin, 4-Pin Aux Power Supply Connectors 31 JF1 Front Panel Control Header 33 JLED1 3-Pin Power LED Header 34 Test Header Reserved for OEM 35 JD1 External Speaker Header (Pins 2-3 shorted for internal buzzer) 36 SP1 Internal Buzzer 38 CPU Socket H2 for an LGA 1155 CPU 44 PRINTER LPT1 Header 1 2 DIMMA1 3 4 Audio 5 6 7 9 8 12 11 10 13 14 16 15 17 18 19 20 21 23 22 24 25 26 27 28 29 31 30 32 33 36 35 34 37 38 39 40 41 42 43 A B C D E F G H I J K L M N O P Q R S DIMMB1 SLOT4 SLOT5 SLOT6 SLOT7 SLOT3 SLOT2 SLOT1 = mounting hole 44 45

C7H61 C7H61-L USER’S MANUAL Revision 1.0c