SUPERTOOTH TW-1 Manuals

USER MANUAL TW-1 CHARGE: 1. Put the earpiece in the charging case. (Note: Each earpiece should be placed in its respective slots; Left earpiece on left side marked “L” & Right earpiece on right side marked “R”) 2. Close the charging case. 3. Connect a micro-USB cable into the device socket of the Charging case. Note: the charging case has an internal battery and can charge the TW1 even without USB cable connected. TW1 LED INDICATOR: The LED will turn red while charging. The LED will turn OFF once the battery is fully charged. CHARGING CASE LED INDICATOR: GREEN: Battery Full RED: Battery Low or charging TURNING ON / OFF: TW1 is in its charging case: POWER ON: Just Pick up the Earpiece from the charging case to turn ON automatically, Led turns blinking GREEN within 3sec… POWER OFF: Put the Earpiece into the charging case and close to turn OFF automatically, Led turns RED. TW1 set alone: POWER ON: Long Press MFB for 2 seconds until LED is blinking GREEN and ascending tone can be heard. Do the same on the second unit. NOTE: Turn ON the second unit; it will automatically reconnect to the paired earpiece. POWER OFF: Long Press MFB button until Led turns RED and descending beep will be heard. Note: Turn OFF any of the 2 paired units will also turn OFF the other paired unit. PAIRING TW1 TO A BLUETOOTH MOBILE PHONE: (Pairing must be done first time only) 1. Remove the two earpieces from the charging case.